Latest activity
-
VVTECnKitkats replied to the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread.Firstly, thank you for your help on this. I have seen you around on the forum as I have been troubleshooting this and it seems like a bunch of people have gotten results from what you do in your free time. I appreciate it. I attempted to follow...
-
Eeugenefvdm replied to the thread dmesg spammed by messages (audit: PROCTITLE proctitle="ebtables-restore").I had an interesting experience with auditing. First off, I have to note that `auditd` wasn't installed on any of my Hypervisors, but I installed it on one to do some troubleshooting. I enabled auditing and then pretty quickly got spammed...
-
VVTECnKitkats replied to the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread.I do not know how to patch the source code, sorry. After running git clone https://github.com/gnif/vendor-reset.git I get the output fatal: destination path 'vendor-reset' already exists and is not an empty directory. When I run dkms install...
-
LLast_Mile replied to the thread [SOLVED] Can't create VMs on PVE 9.1.1 - Empty "Confirm" tab.upgrading from 8.4.16 to 9.1.19 works without the blank confirm screen and without the need for the hackaround.. The find string in #12 isn't in 9.1.19. The workaround replace string is already incorporated into 9.1.19. Everything works on one...
-
Aanutrix replied to the thread Debian 13 LXC Template.I have LXCs from using standard proxmox templates: debian-13-standard_13.1-1_amd64.tar.zst and debian-13-standard_13.1-2_amd64.tar.zst. Based on output from `apt list --installed | cat`, I see: debian-13-standard_13.1-1_amd64.tar.zst LXC has...
-
VVTECnKitkats replied to the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread.I'm sorry, I am not sure what you mean by "after loading the vendor-reset module but before starting the VM." How do I load the vendor reset module? The output of modprobe vendor-reset is modprobe: FATAL: Module vendor-reset not found in...
-
Pportedaix replied to the thread Backup speed regression: 2h20m → 8h39m after PVE 8→9 / QEMU 9.2→10.1 / Ceph 18→19 upgrade.Hi Moayad — image-level results below. Short version: you nailed it. The image itself benches dramatically worse than a scratch image on the same pool, especially in single-thread small/medium I/O. Image identification qm config 162 | grep...
-
Ggfngfn256 replied to the thread Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.When you migrate the VM to another node, the new node is freshly starting the kvm instance (with the new pve-qemu-kvm version) - in fact it is also freshly "booting" the VM - as if it were just now booting - just the state (incl. RAM) has been...
-
Mmartin_comp replied to the thread Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.I just wondered about this and had these thoughts: When I migrate a VM from pve-node-1 to pve-node-2 it (and pve-node-2 has the patch) the patch will be applied and the problem is fixed without rebooting the VM from proxmox. Why cant proxmox...
-
TTErxleben replied to the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026!.Die möglichen Folgen sind mir ja durchaus bewusst. Darum frage ich ja. Nebenbei lasse ich mich nur sehr ungern am Nasenring durch die Manege führen. Das ist eine Mafiamethode: "Wenn du bis zum Tag X nicht reagierst, dann hast du ein Problem!"...
-
Ggfngfn256 replied to the thread Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.AFAIK, that is perfectly normal - as the new pve-qemu-kvm will only be applied on a host restart of the kvm, not internally by a VM reboot, which technically does not restart the kvm host-side.
-
Mmartin_comp replied to the thread Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.Can also can confirm it fixes the issue, but to take effect I had to reboot the VMs (from Proxmox, not from within the VM).
-
Bboisbleu replied to the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026!.Wenn die Zertifikate nicht vor Ablauf erneuert werden, können sie danach nicht mehr aktualisiert werden. Wie auch - es gibt dann ja keine gültigen Zertifikate mehr, die die neuen installierbar und verifizierbar machen.
-
JJohannes S reacted to leesteken's post in the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread with
Like.
This makes debugging harder because the Proxmox host console no longer works. You also don't need this when vendor-reset works. Please undo this. Run the command on the Proxmox host after a reboot, after loading the vendor-reset module but... -
Wweconnect posted the thread [SOLVED] Proxmox VE 9.1.9 issues? in Proxmox VE: Installation and configuration.Hello i have a few proxmox servers and when i go to the console i just see Loading... and on linux i can interact with the console but not if the vm is windows.. here is PVEVersion: pveversion -v proxmox-ve: 9.1.0 (running kernel: 7.0.0-3-pve)...
-
JJohannes S reacted to gfngfn256's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
No force was applied. You can still use any previous kernel - as you are doing now.
-
JJohannes S reacted to TErxleben's post in the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026! with Like.
Das war/ist auch immer mein Gedanke. Kein Secureboot und die Nummer ficht mich nicht an. Ich glaube, ich werde beobachten was nach Ablauf der Frist geschieht und dann erst evtl. mit den Flügeln flattern
-
JJohannes S reacted to uzumo's post in the thread The Reasons for poor performance of Windows when the CPU type is host with Like.
Up to Qemu 11, the only option is “Disabled.” Without hardware acceleration, performance will likely drop significantly. https://forum.proxmox.com/threads/qemu-10-1-available-on-pve-test-and-pve-no-subscription-as-of-now.175350/post-850543 The...
-
UdoB reacted to deebsr's post in the thread [Feature Request] - Remote Migration - Allow re-ID of VM automatically using Target cluster's VMID range with Like.
I have also added to the Bugzilla page for this feature: https://bugzilla.proxmox.com/show_bug.cgi?id=7547 -
Kkur1j replied to the thread Proxmox 9.1.7 RTX 6000 Pro drops off PCI bus.Well I think power state issue is potentially a red herring because the devices have dropped off the PCI bus and I can't get them back without restarting the whole system. Maybe the problem is that the power state WAS changed initially and it...