Latest activity
-
Wwoma reacted to d.oishi's post in the thread Is it possible to have the second nic on my server to be used to access the GUI when the first nic goes down with
Like.
Using two interfaces on the same subnet and assigning each of them an IP address is not a common way to provide redundancy. In general, bonding is used for this purpose. Here is an example configuration. If you want automatic failover, the... -
Bbeisser replied to the thread Ein Netzwerkinterface kommt beim Start nicht hoch.mit kernel 6.17.9-1-pve kommt das interface problemlos beim booten hoch. das heisst für mich, dass meine settings und auch die hardware ok sind und irgendwas in den neueren kerneln anders ist im bezug auf thunderbolt oder die x520. ich werde...
-
Bbeisser replied to the thread Ein Netzwerkinterface kommt beim Start nicht hoch.noch ein weitere info: getestet habe ich das jetzt mit kernel 7.0.0-2 und 6.17.13-3. das verhalten ist das gleiche. ich werde mal einen älteren kernel pinnen und sehen ob sich was ändert.
-
Ddanman replied to the thread PBS and borg backup.Hey Thank you for all the hints. I think I’ll use "borgbackup" directly out of the VM. I just need to back up a directory and a database. I had considered simply backing up the entire VM from one of the PBS servers - I thought that would be the...
-
Falk R. reacted to ThoSo's post in the thread Hilfe nach SAS Controller Tausch - ZFS Pool ist nicht mehr da with Like.
Ich denke, die nächste Herausforderung wird wohl eher das BACKUP sein - wie aus deinem ersten Beitrag hervorgeht gibt es hier wohl keines! -
VVivien replied to the thread Proxmox with ceph performance.Hi, * Disk model of the OSDs They are Dell enterprise NVME 15.36 T, we got 2 types Dell Ent NVMe CM7 E3.S RI 15.36TB and Dell NVMe ISE PS1010 RI E3.S 15.36TB * Network speed for the physical Ceph network(s) Ceph cluster is linked in 2*100G...
-
Jjatrn posted the thread Proxmox roadmap - future direction of snapshot‑as‑volume‑chain in Proxmox VE: Installation and configuration.Hi Proxmox Team, Due to recent licensing changes from Broadcom, we are planning to migrate our current VMware environment to Proxmox VE. We currently use a fibre‑channel–connected storage array (SAN) shared between servers. My main question is...
-
MMarkku replied to the thread LVM and Proxmox.There are ~70 matches for "iscsi" on that page, matching only a few storage types. If I were you, I'd just check/test those out if they match your specific requirements.
-
WWebGreg posted the thread [9.0.6] Different prefixes in the subject depending on the spam points in Mail Gateway: Installation and configuration.Hi If in Mail Filter > What Object I set: Spam (Level 10) Spam (Level 5) Can I set a prefix for a specific level? if lvl 5: [probable SPAM] if 10: [probable phishing!] Now I have set it in Action Objects, but it seems to work globally Or...
-
-
Ggibetnicht posted the thread Mail landet im Spam trotz negativem Score in Proxmox Mail Gateway (Deutsch/German).Ich habe das Phänomen, dass Emails mit einem negativen Score, dennoch im Spam landen und nicht zugestellt werden. Kennt jemand das Problem und hat eine Lösung?
-
Dd.oishi replied to the thread Is it possible to have the second nic on my server to be used to access the GUI when the first nic goes down.Using two interfaces on the same subnet and assigning each of them an IP address is not a common way to provide redundancy. In general, bonding is used for this purpose. Here is an example configuration. If you want automatic failover, the...
-
Ddlaser replied to the thread [SOLVED] Fehler mit Regex. Bitte um Hilfe.Mit der Syntax klappt alles so wie es gewollt wurde ist also gelöst [^@]+@([a-zA-Z0-9-]+\.)*booking-lufthansa\..+
-
Ddoma87 replied to the thread LVM and Proxmox.Partially, because I am connecting the server to the storage via an iSCSI connection, and I’m not sure which of these types are supported for iSCSI.
-
Bbeisser replied to the thread Ein Netzwerkinterface kommt beim Start nicht hoch.hab noch ein bisschen in den logs gegraben und folgendes im journal gefunden: -- Boot 942582e6ce1b4ebe863b1068b5402d8c -- Apr 23 22:53:49 pve3 kernel: ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver Apr 23 22:53:49 pve3 kernel: ixgbe...
-
Ssgw replied to the thread Mellanox ConnectX-4 LX and brigde-vlan-aware on Proxmox 8.0.1.I will have to retry, can't remember if I also tried your syntax. I assume, yes, but it's been a while.
-
Mmason64 posted the thread Is it possible to have the second nic on my server to be used to access the GUI when the first nic goes down in Proxmox VE: Networking and Firewall.Sorry for the long title, Is it possible to have my second installed nic a 2.5gb card to work for the GUI if the main nic 1gb card goes down Currently i have my set up like this Nic 1 - 10.0.0.41/24 gateway - 10.0.0.1 Nic 2 -...
-
aaron replied to the thread Proxmox with ceph performance.Some more details would be good to know: * Disk model of the OSDs * Network speed for the physical Ceph network(s) * General specs of the servers, like CPU and RAM * cat /etc/pve/ceph.conf and cat /etc/network/interfaces please paste the output... -
VVivien posted the thread Proxmox with ceph performance in Proxmox VE: Installation and configuration.Hi, I just connect my proxmox to a new ceph nvme cluster (not hyperconverged). We did some benchmark but the problem is that our read and write are lock for a single VM, the problem didn't seems to come from the ceph cluster as we can do...
-
Bbeisser posted the thread Ein Netzwerkinterface kommt beim Start nicht hoch in Proxmox VE (Deutsch/German).Moin Leute, ich könnte etwas Hilfestellung gebrauchen. Eins meiner Nodes hat zwei Netzwerkinterfaces. Eine I226v, die Problemlos funktioniert und beim Start auch automatisch UP kommt und eine X520/82599ES (angebunden via thunderbolt), die bei...
-
Sfor NVIDIA vGPU you can use the official PVE documentation: https://pve.proxmox.com/wiki/NVIDIA_vGPU_on_Proxmox_VE
