Latest activity
-
CSo I have 9 Physical servers in a pve cluster with about 30 virtual machines running between the physicals. I have one backup job that is set up to back up all virtual machines. This method works fine I have no issues with it. When it runs it...
-
bbgeek17 replied to the thread [SOLVED] Proxmox confused about SAN Storage Capacity.Hi @Technolust , welcome to the forum. Thank you for sharing this interesting observation. However, the default PVE installation does not come with lvm.conf containing two "devices{}" stanzas. Something happened to your file, most likely human... -
CCycloneB replied to the thread IOMMU/DMAR Regression (PTE Write access) on Alder Lake-P (Ugreen DXP6800 Pro) – 6.17.13-2-pve vs 6.17.9-1-pve.@wuselfaktor , fyi that I submitted https://bugzilla.proxmox.com/show_bug.cgi?id=7505 per a recommendation from @fiona in another thread about a different 6.17 kernel issue. I put a link to this thread in the bug report. Thank you again for your...
-
Ffruchtzwerg replied to the thread [TUTORIAL] Developer Workstation (Proxmox-VE 9) with cinnamon (LMDE7).I there a way of managing internet in one place (wifi, ethernet, usb-tethering) ? Wifi: With cinnamon's network-manager I can configure wifi. Inside interfaces I can give vmbr0 internet access via NAT. USB-Tethering: With cinnamon's...
-
JJohannes S reacted to reah's post in the thread Two GPU and their assigment to /dev/dri/renderD... with
Like.
Now I wasn't yet able to make my system assign the card and render nodes differently again. So I won't call the following a solution, but it's an intriguing observation. I already tried the udev way and while it created me /dev/dri/card-amd... -
JJohannes S reacted to dcsapak's post in the thread Two GPU and their assigment to /dev/dri/renderD... with Like.
an alternative would be to use '/dev/dri/by-path' which encodes the pciid and that should be more stable? (i hope at least)
-
JJohannes S reacted to Impact's post in the thread Two GPU and their assigment to /dev/dri/renderD... with Like.
I tried to do that a while ago but it didn't work that well. You might find the notes about my attempt useful though.
-
OOnslow reacted to MyastanPatrin's post in the thread [SOLVED] Proxmox Backup Server boot to BIOS after upgrade from 3 to 4 with Like.
I found the solution! The error was misleading according to the zpool stuff. The issue was that for some reason, the upgrade procedure switched grub-efi to the bios version of grub. By following these steps: # Mount root mount...
-
JJohannes S replied to the thread Migrating PVE install from flash to NVMe.Now I feel stupid to miss that. But for the regular /etc/ directory (which OP also wants to backup if I didn't miss something) snapshots would work fine. And for /etc/pve consistency isn't that much of an issue like with the remainder of /etc...
-
Ggctwnl replied to the thread Backup swap disks?.I have been able to work around it and will post later (still busy urgent getting the system all up and running again)
-
UdoB replied to the thread Migrating PVE install from flash to NVMe.Did you test that? I know that you know that pve is a fuse-mounted database; a snapshot of the "/"-filesystem is... empty: ~# ls -Al /.zfs/snapshot/manual/etc/ | grep pve; echo "inside pve:"; ls -Al /.zfs/snapshot/manual/etc/pve/ drwxr-xr-x 2... -
Ffoam0567 replied to the thread ICMPv6: RA: ndisc_router_discovery errors.Hi, Nevermind, it was a router side issue.
-
UdoB reacted to Johannes S's post in the thread Per-node resource allocation view in PDM / Proxmox cluster with Like.
This is also very convenient for Bad actors/ransomware etc who can destroy not only your PVE nodes but also your backups after taking over the PDM. So I would reconsider whether adding PBS to PDM is actually a good idea
-
G_gabriel replied to the thread Geo IP block help.After a try , ipset created with PVE UI cannot be managed with ipset direcly. ipset created with PVE UI can be updated with CLI pvesh create /cluster/firewall/ipset/my-pve-ipset-name --cidr x.x.x.x/y but too slow if many lines. editing cluster.fw...
-
Ffranckleroy replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.Hello I have successfully upgraded to 20.2.1. Have you applied ec optimizations ? Franck
-
Kkentravis replied to the thread mDNS not working.Thanks for the reply. After messing with it hours, reinstalling one of the laptops, it suddenly started working. I can't specifically say how I fixed it, or what the issue was, as I was trying everything reasonable from Internet troubleshooting...
-
Ffoam0567 posted the thread ICMPv6: RA: ndisc_router_discovery errors in Proxmox VE: Installation and configuration.Hi, I uninstalled tailscale from my proxmox host, and now I am seeing a ton of these errors in the log. Can someone help me diagnose this? pve-dockerhost kernel: ICMPv6: RA: ndisc_router_discovery failed to add default route Here is my...
-
Rreah replied to the thread Two GPU and their assigment to /dev/dri/renderD....Now I wasn't yet able to make my system assign the card and render nodes differently again. So I won't call the following a solution, but it's an intriguing observation. I already tried the udev way and while it created me /dev/dri/card-amd...
-
JJohannes S reacted to celemine1gig's post in the thread UGREEN DXP2800 + Proxmox: SATA / M.2 Bus-Sharing? with Like.
Die Schnittstelle hat mit der Haltbarkeit erstmal gar nix zu tun. Auch eMMCs gibt es Industriequalität, die sowas locker abkönnten. Nur logischerweise verbaut Ugreen solche nicht, da das niemand zahlen wollen würde. Worauf es letztlich ankommt...
-
JJohannes S reacted to Impact's post in the thread Löschen von VM-Snapshots nach Speicher Erweiterung with Like.
Das löschen älterer Snapshots sollte keinen Einfluss auf den aktuellen Zustand des Gastes haben. Ich mach das ständig. Kannst du noch folgendes teilen? cat /etc/pve/storage.cfg qm listsnapshot IDDERVMHIER qm config IDDERVMHIER lsblk...