Latest activity
-
Sscarletdevil19 replied to the thread LXC suddenly not booting.Here is the config arch: amd64 cores: 4 features: nesting=1,keyctl=1 hostname: qbittorrent memory: 1024 mp0: /mnt/pve/Eden,mp=/mnt/Eden mp1: /mnt/pve/Nagato,mp=/mnt/Nagato mp2: /mnt/pve/Wellspring,mp=/mnt/Wellspring net0...
-
BI'm setting up a new Proxmox server, and I'm new to Proxmox myself in general. I am attempting to connect it to my switch via a bonded LAG using LCAP. Proxmox and the switch seem to show the LAG is active, but I can't get the management interface...
-
Bbl1mp replied to the thread First Proxmox homelab build - sanity check on hardware, service layout, and storage.Hi halfdan1988, just a few incomplete thoughts on the setup: Service distribution VMs/LXCs seems reasonable Just save yourself the pain ato run docker (and equivalents) in VMs instead of LXC. Currently most oft my workload is imported from OCI...
-
Iisaacntk posted the thread LXC silently loses IPv6 default route with SLAAC in Proxmox VE: Networking and Firewall.I want to start of saying I understand very little about how IPV6 works under the hood, and I'm not sure if my description of the issue is correct but I'll try my best. I had noticed one of my LXC containers running gitlab would occasionally...
-
Bbl1mp replied to the thread Proxmox Fehler beim Start: end Kernel panic - Not syncing: VFS: unable to mount root fs in unknown-block(0,0).Hi kiste01prox, was definitiv funktionieren sollte, ist ein Rescue Boot vom USB-Stick, dann kann man sich den Sachverhalt im Detail ansehen. Ggf. hilft es vorab im Boot Menü auch eine ältere Kernelversion auszuwählen, dann muss kein USB-Stick...
-
KI actually think I just discovered how to do this very easily via the GUI! For those in the same boat as me, it's found under Datacenter > Storage, not under the PVE node itself. Hopefully this helps someone eventually!
-
Aastehlik reacted to blackpaw's post in the thread Persistently Use FUSE Inside of LXC Container with
Like.
Have you enabled fuse in the Container Proxmox options (under Features). -
Wwellerbm replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.20.2.1 released on the 2nd fixes PR 66543 which includes PR 66542 https://docs.ceph.com/en/latest/releases/tentacle/#v20-2-1-tentacle osd: Fix fast EC truncate to whole stripe (pr#66543, Alex Ainscow)
-
Ttomservo replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.It isn't fixed in the version of ceph tentacle in proxmox. Almost as soon as I tried turning on the EC optimizations on a pool I started getting messages about scrub errors. This is in a test environment so I've decided to just restore the...
-
CCycloneB replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.Just an FYI that since I uninstalled mdadm, I do not have that alert anymore. I sadly fell into another problem, but I've now gotten stable using steps outlined in that thread. I wouldn't be surprised if that problems was contributing to seeing...
-
Llukyjay posted the thread Unplugged USB stops backup in Proxmox Backup: Installation and configuration.Hi For some reason the backup from PVE to PBS fails if a USB device is missing. See the last line. This does not seem logical. 100: 2026-04-08 01:00:02 INFO: Starting Backup of VM 100 (qemu) 100: 2026-04-08 01:00:02 INFO: status = stopped 100...
-
JDa haben wir unterschiedliche Ansichten über die 3-2-1 Regel. 2 Medien kam ja von früher, wie einmal Festplatte einmal Bandlaufwerk. Einfach nur zwei PBS sind für mich nicht zwei Medien. VZDump auf eine externe Festplatte, plus remote PBS ist...
-
HHuamijo reacted to drpepper285's post in the thread Failing SAS Passthrough on Proxmox 9 with 8.14 kernel with Like.
With further digging I found a solution in my case as well. The "hugepage" hint was very helpful but did not fix it for me. The explanation i put together for my case: The patch mentioned above changes how the kernel allocates IOVA (IO Virtual...
-
SSolitudious replied to the thread No Hard Disk Found.
-
-
SSolitudious replied to the thread No Hard Disk Found.
-
-
SI’ve tried the steps in other posts here already to no luck. I’m trying to install proxmox from a v-NAND ssd 970 evo plus 2tb I’ve already installed it and have it working on a dell optiplex but want it on my what’s going to be a NAS tower...
-
-
Ccfgmgr replied to the thread ceph manager crashing on 19.2.3.As far as I know it supposed to be back ported to 19.2.4. I also think its fixed in 20.2.something. Was hoping to get to a 19.2.4 before going to 20.2.X...
-
IIsmo posted the thread Proxmox SDN VXLAN – Internal communication works but no external access from client in Proxmox VE: Networking and Firewall.Hello everyone, I am working on a Proxmox lab using SDN (VXLAN) with a 3-node cluster, and I am facing an issue regarding external access to the SDN network. Setup: 3 Proxmox nodes (cluster) VXLAN SDN network: 10.200.0.0/24 VMs inside the SDN...
-
Kkiste01prox posted the thread Proxmox Fehler beim Start: end Kernel panic - Not syncing: VFS: unable to mount root fs in unknown-block(0,0) in Proxmox VE (Deutsch/German).Hey, Ich habe heute mein immer aktuell gehaltenes System (6.17.13) geprüft und einen verbleiben Speicher von ca 5 % Prozent bemerkt. Wahrscheinlich habe ich in letzter Zeit zu viele neu CT/VM angelegt. Aus diesem Grund dachte ich an eine größere...
-
Hhalfdan1988 posted the thread First Proxmox homelab build - sanity check on hardware, service layout, and storage in Proxmox VE: Installation and configuration.Hi everyone, TL;DR: Planning my first Proxmox home lab build and looking for a sanity check on the hardware and service layout before I commit. I've been researching a lot, and I'm a bit torn between official documentation - which I assume...
