Latest activity
-
Jjan-t replied to the thread alte Kernel Fragmente deinstallieren - löschen.Ich habe mit Proxmox nur die GUI verwendet. Warum wurden nicht alle unnötigen Fragmente nicht entfernt? 14560 -rw-r--r-- 1 root root 14908520 Jul 22 2025 vmlinuz-6.14.8-2-pve 15448 -rw-r--r-- 1 root root 15817512 Dec 19 08:49...
-
NNewbAdmin replied to the thread [SOLVED] ISCSI with chap.I wound up running the initiator on the hosts as recommended, but I passed the LUN directly through to the PBS VM instead of adding the LVM layer. This approach isn't what the Proxmox team recommends for most scenarios, but they do support it...
-
Bbellaireroad reacted to Onslow's post in the thread Lost Proxmox host connectivity after adding vmbr1, but VMs still working with
Like.
@john0017 In your screenshot we can see that the gateway address is in a different network (192.168.x.1) than the iface's address (192.16.x.126/24) (note the second octets: 168 != 16) It has no chance to work :cool: -
Rrelsupport replied to the thread Proxmox 8.4.1 corrupted, unable to recover backup, to restore vm in another proxmox.zpool import -o readonly=on zfsdata, this command is stuck in promox when i run this command. please provide me simple steps to recover my backup data
-
OOther7544 replied to the thread LXC - Omada memory leak?.It appears to be claiming anything up to 0.25gb every two hours, so I have allocated more memory for headroom. But I've also set up a crontab to reboot the container every 24 hours, so that is a band-aid until TP-Link comes up with a solution. It...
-
Nno the location has not moved, can you please post the output of pvesm status and ls -l /var/lib/vz/template/iso
-
Finally got another maint. window, ran the update and was successful. thanks for all your help. Made sure all Bookworm repo's where disabled and went fine. -
Ttheb2b replied to the thread Upgrade Warning.Finally got another maint. window, ran the update and was successful. thanks for all your help. Made sure all Bookworm repo's where disabled and went fine.
-
OOther7544 replied to the thread LXC - Omada memory leak?.Sorry - formatting fixed. On start parameters I don't know how to get/display that unless it is these: arch: amd64 cores: 2 hostname: omada memory: 4096 net0: name=eth0,bridge=vmbr0,hwaddr=BC:24:11:56:F4:19,ip=dhcp,type=veth onboot: 1 ostype...
-
-
Hhblandford posted the thread EVPN SDN Feature Request/Solved Solution for SDN vrf default route in Proxmox VE: Networking and Firewall.Hopefully this is useful. I believe I can submit a patch if this is acceptable. Background: I have a pfSense firewall that separates my current network environment. I wanted to deploy multiple new segments for some workloads I wanted to run...
-
Uuzumo replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.I ran a full set of tests today, and everything seems to be working fine. No changes are apparent compared to before the update. Performance improvement: None Performance degradation: None Increase in power consumption: None Errors in the log...
-
OOther7544 replied to the thread LXC - Omada memory leak?.I think the guilty party is Omada as @Neobin has shown in the links. A daily reboot is probably the answer until they fix Omada. I don't get anything from docker stats and I can't see where it was asked for in the original link. top -co%MEM...
-
SSeigneurAo posted the thread Trouble getting OPNSense's DHCP to work across a Proxmox cluster in Proxmox VE: Networking and Firewall.Hello ! Setup : 3 nodes cluster (important, nodes are on DIFFERENT physical sites, and I'm assuming no private network between them, to be extra cautious), added all nodes in a SDN vxlan zone + created a VNet (subnet 10.6.6.0/24 with gateway =...
-
Mmarshe replied to the thread Struggling to Properly Configure Passthrough (I Think?).Fine, made new thread. still need help.
-
Bbitranox replied to the thread yawgpp (Yet Another Windows Guest Performance Post).I put together some manual how to run microsoft openvmm on proxmox : https://github.com/bitranox/proxmox_openvmm OpenVMM is a Type-2 VMM written in Rust by Microsoft. On Linux it runs on top of KVM. That makes it possible to run Windows and...
-
Aadmlvntv replied to the thread Proxmox node status is showing as unknown.Hi all, thanks for the quick response and warm welcomes (: The screenshots are taken for pve02, but using the webui of bioumass, as the pve02 web ui went down; unsure if that is expected behavior. The hosts file has nothing out of the ordinary...
-
-
Sskraw replied to the thread corosync show link flapping (down/up) about every 3-4 minutes, but switch shows no problem.Just to make that clear again: the networt link is not saturated. Monitoring shows an average of around 400 MBit/s on a GBit interface. Which means it is quite far away from a bandwith problem. So the real question here is: why are packets lost...
-
SteveITS posted the thread Negative affinity moved both VMs in Proxmox VE: Installation and configuration.I realized after upgrading to PVE9 we'd somehow ended up with two VMs on the same node that are usually and should probably be separate (though not critical). I thought that was a great use of the new HA negative affinity feature, so I created...
-
HHello, I'm using Proxmox for a while now, running different Containers and VM's. Recently I set up a Proxmox Backup server, and now wondering if it can Backup my ZFS datasets which are running on the PVE host. In particular I have one ZFS pool...
-
HIt would definitely be convenient to manage all backups through the same interface. Just less work for admins. It would also be hugely convenient to be able to backup a dataset as a scheduled job with all the benefits of other job.
