Latest activity
-
MI actually think I just discovered how to do this very easily via the GUI! For those in the same boat as me, it's found under Datacenter > Storage, not under the PVE node itself. Hopefully this helps someone eventually!
-
MHow did you try to remove the pool? Have you tried pveceph pool destroy <pool> --force?
-
TTheDJ replied to the thread [SOLVED] Advice needed - Upgrade PVE 8 to 9 using systemd-boot with ZFS rpool, UEFI, and no secure-boot.As far as I can remember, I followed the exact commands from https://pve.proxmox.com/wiki/Upgrade_from_8_to_9 apt update apt dist-upgrade ======= sed -i 's/bookworm/trixie/g' /etc/apt/sources.list sed -i 's/bookworm/trixie/g'...
-
OOnslow replied to the thread [SOLVED] Advice needed - Upgrade PVE 8 to 9 using systemd-boot with ZFS rpool, UEFI, and no secure-boot.Hi, @TheDJ What commands, exactly, did you use?
-
MML_IT reacted to aaron's post in the thread No Disk visible when installing Windows in VM with
Like.
Add a second CD drive and attach the latest Virtio ISO to it. Then during installation you can click on the Load Driver (Treiber Laden) button. The driver should be in the `vioscsi` directory. After the driver is loaded you should see the disk. -
Mmichabbs posted the thread cross cluster migration with snapshots in Proxmox VE: Installation and configuration.2026-03-22 08:27:03 can't migrate local volume 'dpool:subvol-2033-disk-0': remote migration with snapshots not supported yet Are there plans to make it work in the near future? I assume solution for now is to delete snapshots, or backup+restore...
-
OOnslow reacted to fluxflox's post in the thread <span>nodename</span> showing up in front of everything with Like.
@Hank42 solved this on a different version. Me also encountered this <span> bug in the resource tree with PVE 9.1.6. The fix is to downgrade proxmox-widget-toolkit to the version that actually matched pve-manager 9.1.6 at release time: sudo apt...
-
OOkay, I half-way solved it. I could use PgDn to jump to Advanced and then slowly press ENTER two times what brings me into the Debug screen of the graphical installer. Using Ctrl-D and another Ctrl-D I can get into the installer and then I can...
-
VVasily Pechersky replied to the thread Restore from PBS by API to specific storage.Hi! Any ideas ? Now I see similar challenge and even archive parameter is not listed in API browser. I have a task: make "replication" to DR. Currently I am using clone to produce 'replica' machines, but better way is to restore from backup.
-
powersupport replied to the thread Move backups from disk to disk.Hi, You may want to check how your storage is configured first. In Proxmox, backups are usually stored as regular files (in the <span>dump/</span> directory), so there’s no direct GUI option to move them between storages. One approach you can... -
TTheDJ replied to the thread PVE8to9 Prompts to Remove systemd-boot on ZFS & UEFI.Did you complete the upgrade in the end? If so - did you remove systemd-boot? I have a comparable setup, and I also think that this "edge case" is left out in the documentation.
-
TTheDJ posted the thread [SOLVED] Advice needed - Upgrade PVE 8 to 9 using systemd-boot with ZFS rpool, UEFI, and no secure-boot in Proxmox VE: Installation and configuration.I planned to upgrade from PVE 8 to 9 this weekend. In preparation, I ran pve8to9 --full and received the bootloader info message: INFO: Checking bootloader configuration... FAIL: systemd-boot meta-package installed. This will cause problems...
-
UdoB replied to the thread pct list endless.You may try to limit the speed of a backup. If I remember correctly this limit affects also the read speed on the source side. Datacenter --> Backup --> Edit:Backup Job --> Advanced --> Bandwidth Limit The other mechanism to reduce stress is... -
Cceghey replied to the thread [SOLVED] Anti-Cheat KVM Settings.yes this may help:https://github.com/Scrut1ny/AutoVirt/issues/116 UPDATE: I tried this but no success, this is too much for me. sis@deb13vm:~/pve-qemu/qemu$ ./qqq.sh error: patch failed: hw/acpi/aml-build.c:2263 error: hw/acpi/aml-build.c...
-
Zzegorax replied to the thread pct list endless.Yes, exactly. I'm suspecting that it's about I/O pressure but I'm not sure. When I try to debug it, I always have to reboot the whole server eventually to make services available again. It's really annoying. Some another weird thing that I...
-
Oodhiambo replied to the thread HELP! Can't Access WebUI After Fresh Install!.At this point in time, I am interested in one thing: How your own computer (the one you are writing these posts from) is connected to the infrastructure in your house. Can you possibly draw for us what the network looks like? If your ISP doesn't...
-
Oodhiambo reacted to leesteken's post in the thread HELP! Can't Access WebUI After Fresh Install! with Like.
I'm not sure what a "wifi pod" is but it's probably not relevant to Proxmox (as it does not come with WiFi). Your modem (provided by your ISP, I assume?) is probably also your router and your DHCP server. It appear to not accept or route traffic...
-
Pproxuser77 reacted to 6equj5's post in the thread Einführung von Einschränkungen / Kennzeichnungspflicht von KI-Beiträgen with Like.
Das gurkt mich schon ewig und drei Tage in den M$-Foren so an. Also lange bevor es KI gab. "I am an independant advisor from Rawalpindi and here to help you." Dann folgt einfach eine Liste von Googleergebnissen, die jeder selbst schon 1000x...
-
UdoB reacted to bbgeek17's post in the thread [SOLVED] Proxmox VE 8.1: Recover data from vm-103-disk-1.qcow2 with Like.
Hi @smirandac1978 , welcome to the forum. As a general advice - it is recommended to open your own thread rather than bumping something from two years ago. To answer your question - its impossible to know whether you can make a VM boot from...
-
UdoB reacted to gfngfn256's post in the thread Help, I want to recover data from a QCOW2 file from a Proxmox VM with Like.
To mount a QCOW2 (partition/s) image in any Linux environment - you could search the general web for details. Here is a pretty good result: https://www.baeldung.com/linux/mount-qcow2-image