You can also adapt the systemd unit file `systemctl edit pvedaemon` as noted here: https://forum.proxmox.com/threads/abysmally-slow-restore-from-backup.133602/page-7
Generally speaking, yes, this should work quite smoothly since the hardware models are identical. However, there are two main things you should be prepared to check:
1. Network Interface Names
Even on identical hardware, interface names (e.g...
hi, i changed mtu of all the Vm manually through GUI, it take a bit long time , but done, thanks a lot
IIRC apt, is showing a messsage to use apt autoremove to remove these packages, but i am still a little bit scared, if some reason it failed...
I no longer run TrueNAS virtualized, but when I did, I ran it both way, passing through individual drives and passing through an entire HBA. Passing through the HBA is definitely the way to go. But honestly with that device, just run TrueNAS bare...
I have 2 instances of TrueNAS VM's running on Proxmox
Pass through the entire controller, that is the recommended method, although people do have the system functioning with the disks pass-through. The issue is that it's then possible (unlikely)...
We are running it to publish a few smb network shares. Probably not all best-practices implemented, but we haven't bothered with pass-through since we want to do easy migrations:
One thing we used to have working is "Previous Versions" in...
That is an entirely different fault concerning USB4/Thunderbolt connectivity. Start your own thread.
The error message is informing you what to install.
https://forum.proxmox.com/threads/abysmally-slow-restore-from-backup.133602/
If im reading the post correctly(im still pretty new to this), The feature is enabled by default in PVE9. It has 4 threads and 16 chunks in parallel as default. You can...
Since the official PBS team has had a Windows client on their roadmap for many years, I was wondering if you had any contact with them. A proven working client like yours should speed up the development of the official client if there is interest...
Thanks for working on this tizbac.
Given its alpha state, and your (quite sensible) disclaimer that anything could go horribly wrong, including the loss of source data, I'll refrain from running this on any "real" machines...
Are you aware of...
That is an entirely different fault concerning USB4/Thunderbolt connectivity. Start your own thread.
The error message is informing you what to install.
Just to report : even local restore is boosted.
PBS alongside PVE , Restore to Datacenter SATA SSD from Datacenter SATA SSD
170G used data of 400G virtual disk
Speeds are over SATA speeds because writing zeroes seems accounted/
PVE 8.4.0 restore...
With the tunable verification settings we went from a 4 hour verification process to 30 mins. Quite the improvement! :)
5x 61.44TB Solidigm in a RAIDz1 - Which in the past a benchmark showed about 30GB/s reads.
I'd like to given update on the matter, after working with the Proxmox support through a ticket. But first I'd like to answer to the questoin from SteveITS:
The hypervisors are backed via NFS storage, where we use the raw disk format. These are...