Latest activity
-
JJohannes S reacted to bbgeek17's post in the thread [TUTORIAL] PoC 2 Node HA Cluster with Shared iSCSI GFS2 with
Like.
As our customers are businesses and enterprises, I'd never recommend to them to use unsupported technology combination. That said, necessity is the mother of invention/adaptation. The minimum requirements of GFS2 do not negate the minimum... -
JJohannes S reacted to Steven-b's post in the thread [TUTORIAL] PoC 2 Node HA Cluster with Shared iSCSI GFS2 with Like.
Ok, that did not directly come to mind to be honest, but it is very understandable at the moment. Our customers when migrating away from Hyper-V or VMware environments usually do this when they need to replace their hardware after 5-8 years. In...
-
Mmell123 posted the thread HPE ProLiant DL380 server. Proxmox installer crashes after 30 seconds in Proxmox VE: Installation and configuration.Hey, struggling to install Proxmox on an HPE DL380 Gen10. The boot menu loads fine but as soon as I select any install option it crashes after 30 seconds then reboots. Tried both graphical and terminal installers, tried different USB ports and...
-
Kkk_proxmox posted the thread [SOLVED] can not get disk smart information in Proxmox VE: Installation and configuration.server is UCS C240 M5S pveversion -v proxmox-ve: 9.1.0 (running kernel: 6.17.13-1-pve) pve-manager: 9.1.6 (running version: 9.1.6/71482d1833ded40a) proxmox-kernel-helper: 9.0.4 proxmox-kernel-6.17: 6.17.13-1...
-
ZZuoBohKing posted the thread PVE 9.1.1 Memory bug ? + Windows Server 2025 installation experience sharing in Proxmox VE: Networking and Firewall.It was pretty roller coaster for installing Windows Server 2025 on 9.1.1 Latest ISO won't boot, and eventually the evaluation ISO works! I almost wanted to use the thumb drive given by Microsoft because i also can't find the RTM ISO link. This...
-
-
Ssoftworx replied to the thread Limiting VMs to physical cores, no hyperthreading.I believe NUMA should normally be on, but we've found with high loads on special cases, specifically where there's only 1 VM on the blade and it's given almost all resources of the blade, that we get a little extra boost with NUMA off in the VM...
-
Mmicneu replied to the thread OpenWRT-Gateway Failover per VM.So wie mir die pfsense Hardware um die Ohren fliegen kann, kann dir die proxmox Hardware abrauchen. Da ich das zuhause für mich alleine betreibe habe Ich natürlich keine 2. Netgate 6100 stehen. Aber ich bin mit dem Setup so zufrieden, ich könnte...
-
SSteveITS replied to the thread [SOLVED] Stupid question: Where can you ger VirtIO ISO for Windows?.As noted in the doc though you probably want v0.1.271
-
SSteveITS replied to the thread Limiting VMs to physical cores, no hyperthreading.With multiple physical CPUs normally NUMA should be on…?
-
Jjaminmc replied to the thread Automated install script for OpenWrt in a Container on Proxmox!.There is no known way to upgrade OpenWRT in place without reinstalling, as it lacks filesystem separation and cannot run partition tools inside a container. What you can do instead is create a backup from the OpenWRT web interface, save your...
-
bbgeek17 reacted to unsichtbarre's post in the thread Connecting PVE to a Dell Compellent with Like.
Duh! root@host1:/var/lib/iscsi/send_targets# pvcreate /dev/mapper/mpatha Physical volume "/dev/mapper/mpatha" successfully created. -
bbgeek17 replied to the thread Connecting PVE to a Dell Compellent.You can try to "ls -alR /dev|grep mpath". You will likely find it in /dev/mapper. You can also grep for dm-5, or 36000d310055d34000000000000000028 Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
Uunsichtbarre replied to the thread Connecting PVE to a Dell Compellent.Duh! root@host1:/var/lib/iscsi/send_targets# pvcreate /dev/mapper/mpatha Physical volume "/dev/mapper/mpatha" successfully created.
-
Uunsichtbarre replied to the thread Connecting PVE to a Dell Compellent.OK, so I get: root@host1:/var/lib/iscsi/send_targets# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 111.3G 0 disk sdb 8:16 0 111.7G 0 disk ├─sdb1 8:17 0 1007K...
-
Uunsichtbarre reacted to bbgeek17's post in the thread Connecting PVE to a Dell Compellent with Like.
Hi @unsichtbarre , You are more than halfway there. The only thing left to do is set up LVM. There are two main ways to configure iSCSI with Proxmox Virtual Environment. The first method is to use the built-in PVE iSCSI storage pool. The...
-
KKingneutron reacted to Johannes S's post in the thread Any guest OS support matrix on Proxmox? with Like.
Basically any operating system which is able to run on a modern x86/64 system should run in ProxmoxVE too. Depending on the usecase and specific os there might be some other considerations, for examples Redhat and Co (Alma/Rocky) demands that the...
-
KOk, I have this figured out and the result is largely why I started this thread - every procedure I have found is incomplete or has major assumptions that may not be obvious. So, future Googlers, here is the deal. Do this is in this order on the...
-
Ssoftworx posted the thread Limiting VMs to physical cores, no hyperthreading in Proxmox VE: Installation and configuration.Hello, I know hyperthreading comes up from time to time, and I have read several of the other messages about it over time, but the recommendations I've seen a few times don't seem to hold up with our testing, so I hope you don't mind me asking...
-
Ggvtzimas replied to the thread [TUTORIAL] Dell OpenManage Enterprise.Worked great , much appreciated!!! Thank you
-
bbgeek17 replied to the thread Connecting PVE to a Dell Compellent.Hi @unsichtbarre , You are more than halfway there. The only thing left to do is set up LVM. There are two main ways to configure iSCSI with Proxmox Virtual Environment. The first method is to use the built-in PVE iSCSI storage pool. The...
