Latest activity
-
Ppepsov replied to the thread NIC no longer works after kernel upgrade.."probe of 0000:XY:00.0 failed with error -5" error is not specific to the NIC in question. It plagues many NICs (i350-T4 and Chelsio 10Gb/1Gb cards come to mind immediately, probably many other are affected too) with recent Ubuntu-derived...
-
KHi, moving the disk without deleting the source will result in two disks. The copy of the original located on the NFS storage and the original one, remaining on local-lvm, the new disk will be attached to the VM and the old one marked as unused...
-
Ppepsov reacted to vmblaster's post in the thread NIC no longer works after kernel upgrade. with
Like.
Yep this is the same adapter i have. Hmm so when you downgrade the kernel, does the card work properly with the atlantic driver? Getting the marvell driver to work isn't easy, there's a github issue about it here... -
Mmfederanko replied to the thread Moving VMs with snapshots.Hi, moving the disk without deleting the source will result in two disks. The copy of the original located on the NFS storage and the original one, remaining on local-lvm, the new disk will be attached to the VM and the old one marked as unused...
-
PPinacaGina replied to the thread Migration from vmware 7.03 to proxmox-a pve-manager/9.0.10 - qemu-img: output file is smaller than input file.Migrating VMs from VMware to Proxmox, the “output file is smaller than input file” error usually happens when qemu-img tries to write to storage that doesn’t support sparse files or thin provisioning properly or when the target storage format or...
-
Pph4zed replied to the thread extended LVM, now it's 100% used?.Ok, so if I go ahead and remove this from the cluster and wipe it/reinstall proxmox and want to extend the correct partition across the 3 drives, which partition would I do that with-- and should I just leave some small amount unused for any...
-
KKhensu replied to the thread [SOLVED] I broke HBA passthrough to TrueNAS VM by adding 2nd HBA.Glad to hear :) You can mark the thread as solved by clicking "Edit Thread" at the top > Click on (No prefix) > Select [SOLVED] > Save
-
bbgeek17 replied to the thread VE_9.0.1 Fiber Channel only 1 of 3 hosts see the storage as active. Status Unknown.This is not enough information. Given that you are using Pure and their support is known to be very good, perhaps you should reach out to them for help. Here is a list of things that you need to minimally provide so that forum volunteers can... -
Ttmath250 replied to the thread [SOLVED] I broke HBA passthrough to TrueNAS VM by adding 2nd HBA.You're suggestion fixed it!!! Thank you so very much! Now if I could only figure out how to mark this as [SOLVED]:rolleyes:
-
Hi, thank you for the reports! I can reproduce the issue here. When the disk size is 15000 GiB it still works, with 17000 GiB it fails, so likely 16 TiB is where it gets problematic. We use qemu-img measure to calculate the size of the underlying... -
Bbeisser reacted to boisbleu's post in the thread Dateien im Netzwerk verschicken sich nur sehr langsam obwohl das Netzwerk ordentlich Leistung hat - Woran kann das liegen? with Like.
Er will damit sagen, dass hier so ziemlich alles an Informationen und Details fehl, um die Frage sinnvoll zu beantworten.
-
Bbeisser replied to the thread Dateien im Netzwerk verschicken sich nur sehr langsam obwohl das Netzwerk ordentlich Leistung hat - Woran kann das liegen?.du gibst uns einfach keine informationen. wir können nur aus der glaskugel lesen. gib infos. welche hardware, welches netzwerk, welche software, welche protokolle. dazu noch pve-version und verwendeter kernel und die einstellungen beider VM's...
-
Jjlbbb replied to the thread Filesystem choice for consumer SSD.Hello and thanks for your reply. I hear that too, one person on youtube apparently debunked this (for reference: https://www.youtube.com/watch?v=V7V3kmJDHTA ) but the common knowledge remains: ZFS kills SSD... I can't quite explain this, hard...
-
Jjotha replied to the thread [SOLVED] PVE 9.1.5: Linux VM Freeze Randomly.Btw: A new core update for the IPfire is available since today. It is using Linux kernel 6.18 LTS. I'll give it a try on the second VM (104) and see if it helps.... Regards, Jörg
-
Bbanana_mcn replied to the thread Proxmox random crashes without logs.I got the same problem, a random crash around 2 hours without any error logs on my Hetzner server. Already replaced all hardware, still the same. No crash dump or journal logo_O
-
Jjotha replied to the thread [SOLVED] PVE 9.1.5: Linux VM Freeze Randomly.Hello Fiona, I've activated IO Thread for the disk and configured VirtIO SCSI single as machines controller now for both affected VMs. Let's see if something changes... Thanks and regards, Jörg
-
Jjotha replied to the thread [SOLVED] PVE 9.1.5: Linux VM Freeze Randomly.Hello, vmdata1 is local storage (2 disks, 2.4GB) configured as mirror-0 ZFS. Regards, Jörg
-
NLXCs are different than Docker images. To the OP, you can use standard Debian commands (apt) in an LXC to update to the new version of PHP. But I am not sure if what you need is in the backports repo or some other 3rd party repo. But, honestly...
-
Jjbaas replied to the thread Cluster unusable due to NAS disruption.Gotcha, thanks. Restart it is.
-
Jjlbbb replied to the thread Filesystem choice for consumer SSD.Hello and thanks for your reply, is there a real advantage though? Over tuned ZVOL I mean, I see that WAF could be severely reduced by turning some knobs in ZVOL config, is that true? Because it mostly comes from (I suspect) AI generated...