Latest activity
-
Fflipside786 posted the thread Help with ASUS WS680 IPMI Card and Proxmox in Proxmox VE: Installation and configuration.Hello All, I am moving over my home lab from VMWare over to ProxMox and just getting familiar with the whole Proxmox setup. I am setting up ProxMox on an WS680 ACE IPMI board that has an external IPMI card that goes into one of the PCIE slots...
-
Ccosmos255 replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.Update: direct PCI pass thru of the data drive to omv appears to have stabilized this
-
Moayad reacted to shanreich's post in the thread VNets ID length limited to 8 characters. Why? with
Like.
That's pretty much it, i.e. VLAN devices (ethX.1234) take 5 additional characters for instance. 8 was chosen so there's still some wiggle room for autogenerated names for network devices. -
Nness1602 replied to the thread [SOLVED] Weird RAID configurations for redundancy.Maybe in paranoid case you can go with raidz3, so that 3 disks can die? And set up spare .
-
Ppvginkel replied to the thread Swap usage while running backups.There's an actual slowdown. I have a dev machine that I use during the day. Of the 16 GB of RAM allocated to the machine, 4 GB gets swapped out. It's a regular victim. When I use the machine it feels sluggish and sometimes slow. When I flush the...
-
BBobhWasatch replied to the thread Installing Proxmox 9.1 using wifi and wifi-adapter..If there are any shortwave listeners or ham operators in the house, they will be very upset with you for installing one of those things. They spew RF energy everywhere since they use basically the whole HF band and your house wiring probably...
-
VictorSTS replied to the thread [SOLVED] Weird RAID configurations for redundancy.You can do this with ZFS, albeit manually (not from webUI). You could also create 2 5-way mirror with 5 disks each, then create a RAID0 with those two vdev. Something like choosing stripping "vertically" or "horizontally". No idea on how it would... -
Llittlejohn posted the thread Root user cannot edit any settings in Mail Gateway: Installation and configuration.Hi Im logged in as root and I want to change some of the settings; I go to Configuration => Spam Detector and on both the Options and Quarantine tabs, the Edit button is greyed out How do I edit settings? Regards John
-
CoolTux replied to the thread [SOLVED] paperless-ngx - LXC oder VM.Ich würde eine VM nehmen und Paperless dort als Docker Container installieren. -
Jjcsobrino replied to the thread [TUTORIAL] Metasploitable2.Thanks, Coyo It worked for me too. Running Proxmox VE 9.1.4
-
JHi all, I've been toying getting Metasploitable to run on Proxmox. The below steps result in a working VM. I installed some packages on the proxmox server (unzip), if that is not desired, perform image manipulation on another host. wget...
-
BBobhWasatch replied to the thread Swap usage while running backups.Why do you care? Is there an actual slowdown of the VM that persists, or is this more of an aesthetic issue where you don't like to see swap use? From a system performance perspective it actually might be a good idea to put some lesser-used...
-
Bboisbleu replied to the thread Hohe SWAP Auslastung.Warum haben denn beide Maschinen 4 Sockets mit je 8 Kernen? Der Host hat 1 Socket mit 16 Kernen (32x virtuell). Mit der Konfig der beiden VMs hast du dir selbst elend lange CPU-Wartezeiten eingebaut. Stelle mal um auf 1 Socket und 8 Kerne, damit...
-
FFlock6659 posted the thread Proxmox Keeps Freezing every 2-3 days in Proxmox VE: Installation and configuration.Hi everyone, I am running Proxmox VE 9.1.1 on a Beelink EQ14 (Intel Twin Lake N150, 16GB RAM). I am experiencing random hard freezes every 2-3 days. The system becomes completely unresponsive and I'm looking for advice on how to debug this...
-
Wwaltar replied to the thread [SOLVED] Weird RAID configurations for redundancy.Yes, this kind of weird raid configuration is possible doing via zfs (mirror), mdadm (raid01) or combination of "hw-raidctrl with mdadm (raid01)" while is nothing special to proxmox because possible in each linux ... but if it's really...
-
MMathieuMD replied to the thread VNets ID length limited to 8 characters. Why?.Thanks for the explanations!
-
MMathieuMD reacted to shanreich's post in the thread VNets ID length limited to 8 characters. Why? with Like.
That's pretty much it, i.e. VLAN devices (ethX.1234) take 5 additional characters for instance. 8 was chosen so there's still some wiggle room for autogenerated names for network devices.
-
Jjtru reacted to cwt's post in the thread Not getting good network throughput even with LACP bond with Like.
The issue you are seeing is not related to LACP and not caused by the physical network. What you are running into is a VM topology and platform problem that becomes visible after an ESXi to Proxmox migration. The i440fx machine type is a legacy...
-
Kkowmangler replied to the thread Shared GPU for VDI -- Radeon Pro v340 ?.After I tried all the windows stuff I posted I reinstalled windows and instead of going through all that work just used the "I have a driver" and pointed it to the driver file in the unpacked directory. Windows complains it might break since the...
-
Aab-wer replied to the thread Virtual machines in Proxmox 9 randomly freeze during reboot.Pretty sure I found a solution now. I noticed that on machines running on runlevel 3 (no gui) the console will freeze after some time. It does not need to be an active console window - you start the machine and after a few days (could vary) you...