Latest activity
-
weehooey-cd replied to the thread Extend CT Volume backward ?.Hello rXp, Could you please clarify if this is a Container in your storage, or within a VM? Is it an [lxc]? At your convenience, could you please also run the command [pvesm status] and share its output? -
AAlfons posted the thread Automatic poweroff and poweron to save energy in Proxmox Backup: Installation and configuration.Hello, I am running a dedicated proxmox backup server. All backup clients are configured to run their backups once per week at around 11am of sunday as this is the time, where almost no user activity is active. Consequently the backup server...
-
cwt replied to the thread Not getting good network throughput even with LACP bond.The issue you are seeing is not related to LACP and not caused by the physical network. What you are running into is a VM topology and platform problem that becomes visible after an ESXi to Proxmox migration. The i440fx machine type is a legacy... -
Nnico1875p replied to the thread Networking Assistance please.Hi TmacTech, This is a pretty common issue with Intel X540 (and other ixgbe-based NICs) on consumer platforms like Z390 when they’re shared with a TrueNAS SCALE VM through a Linux bridge. What’s happening is that when TrueNAS starts, the ixgbe...
-
66equj5 reacted to dbsmith's post in the thread Help with webhook notifications to apprise with
Like.
You're welcome! It was a pain for me too, so I'm glad it helped someone else. -
66equj5 reacted to dbsmith's post in the thread Help with webhook notifications to apprise with Like.
Here is how I got Proxmox > apprise-api > Telegram notifications working: Method/URL: http://<apprise-host>:8000/notify/<appriseconfig> Headers: Content-Type: application/json Body: { "title":"{{ escape title}}", "body":"{{ escape message...
-
Nnico1875p replied to the thread VNets ID length limited to 8 characters. Why?.Thanks for confirming. That explains the 8-character limit clearly.
-
Nnico1875p reacted to shanreich's post in the thread VNets ID length limited to 8 characters. Why? with Like.
That's pretty much it, i.e. VLAN devices (ethX.1234) take 5 additional characters for instance. 8 was chosen so there's still some wiggle room for autogenerated names for network devices.
-
IIsThisThingOn replied to the thread Hohe SWAP Auslastung.Hardware? SSD Hersteller? Die VM nutzt also eine disk auf maindata. Maindata ist ZFS. Wie ist das ZFS gemacht? Mirror? RAIDZ? Vermute mal den default 16k volblocksize? Warum hat die VM writeback? Falls maindata SSD ist, warum kein SSD emulation...
-
Nnico1875p replied to the thread Force VMs to connect to internet via VPN.What’s missing is outbound NAT and policy routing. Creating the WireGuard tunnel alone is not enough on OPNsense; you must explicitly NAT traffic to the WG interface and route LAN traffic via the WG gateway instead of replacing the default route...
-
MMr.Doubt replied to the thread [SOLVED] paperless-ngx - LXC oder VM.Wenn Du es, wie von denen präferiert, als docker betreibst, nimm eine VM. Docker in LXC ist nicht empfohlen. Wenn Du es in einem LXC betreiben möchtest, ist der Weg hier sehr rudimentär beschreiben. Scanner könnte man vielleicht als USB-Device...
-
shanreich replied to the thread VNets ID length limited to 8 characters. Why?.That's pretty much it, i.e. VLAN devices (ethX.1234) take 5 additional characters for instance. 8 was chosen so there's still some wiggle room for autogenerated names for network devices. -
JJohannes S reacted to bbgeek17's post in the thread VMFS equivalent in Proxmox? Shared iSCSI filesystem across multiple nodes with Like.
There are commercial products, including ours, that provide stable enterprise-grade storage solutions fully integrated with Proxmox VE. Whether these platforms are a good fit depends on your specific requirements, including workload...
-
Nnico1875p replied to the thread VNets ID length limited to 8 characters. Why?.This is not a Linux interface name limitation by itself. The VNet ID is used as a base identifier from which Proxmox automatically generates multiple internal objects (bridge names, veth/tap interfaces, VLAN/VXLAN devices, firewall rules, SDN...
-
NYeah I crammed in a Cisco SF200-24P in there and it works properly now. Thank you guys for help.
-
Mmathlin replied to the thread EVPN with multiple exitnodes and no primary exit node possible?.After setting it on the uplinks only and then rapidly loosing patience and setting it everywhere it works. Now its just a matter of removing them one by one and finding out what links that really need the setting. Would a file in /etc/sysctl.d/...
-
Ssortns reacted to jmp's post in the thread How to add labels/tags/comments to proxmox nodes? with Like.
It's almost criminal that we cannot tag nodes in the cluster.
-
Mmacindy posted the thread Network unstable on Intel Core Ultra 265T System in Proxmox VE: Installation and configuration.I recently purchased a Dell Micro PC with an Intel Core 7 processor (Dell Pro Micro QCM1250 Core Ultra 7 265T). Unfortunately, the system is unstable. The network card seems to be the issue; the server intermittently becomes unreachable. I can...
-
Ti have chrome os flex running inside proxmox (8.3.3) for a long time now. works pretty decent especially due to the "VirGL" GPU. I cannot remember if i did anything special during installation or something special to the UEFI setup, but i...
-
PPredis posted the thread [SOLVED] Weird RAID configurations for redundancy in Proxmox VE: Installation and configuration.Let's say I have 10 drives of 6 TB each and want to make sure the storage is safe. Can stripe/raid0 5 pairs of them to make 5 pairs of 12TB and then mirror/raid1 them so that all 5 pairs have the same data on them? i would be happy with 12 TB...