Latest activity
-
JHallo Forum, welche Empfehlung gebt Ihr mir https://github.com/paperless-ngx/paperless-ngx zu installieren? Als LXC oder als VM? Die gefundenen Threads beziehen sich alle auf LXC. Da das System dauerhaft betrieben werden und evtl. auch ein...
-
Ccarnyx.io replied to the thread proxmox 8 - how migrate vm without shared storage ?.hello. Yes your are right. If I temporarily disable the "shared" option on storage, I can perform a command-line migration. if VM stopped: qm migrate 506 pvagir6 --targetstorage MD3200_LUN81_backup if VM running: qm migrate 506 pvagir6...
-
RRaudi replied to the thread [SOLVED] PVE 9.1.4 / NVIDIA Tesla T4 / vGPU 19.3 Installation.Habe noch was im Log gefunden: Jan 14 22:57:51 pve02 nvidia-vgpud[1288]: error: failed to allocate client: 59 Jan 14 22:57:51 pve02 nvidia-vgpud[1288]: error: failed to read pGPU information: 9 Jan 14 22:57:51 pve02 nvidia-vgpud[1288]: error...
-
Eebiss reacted to The Inc.'s post in the thread [SOLVED] Split Lock Detected on Intel Xeon Silver 4310 CPUs Under Load in Proxmox – Troubleshooting Steps? with
Like.
After the applied solution, the system seems to be stable and performing as it should! Solution applied: echo "kernel.split_lock_mitigate=0" > /etc/sysctl.d/50-split-lock.conf cat /etc/sysctl.d/50-split-lock.conf #check if the .conf is created... -
Ccosmos255 replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.Has anyone tried a direct PCI pass of the storage ssd thru to the nas vm yet? That's my project for today. I have this issue
-
Bbuba replied to the thread No internet in VMs or LXC containers..Yeah I crammed in a Cisco SF200-24P in there and it works properly now. Thank you guys for help.
-
G_gabriel reacted to fiona's post in the thread Disk migration speed is capped by disk read/write limits in PVE 9 with Like.
Hi, thank you for the report! I can reproduce the issue here and will look into it. It's a regression from the switch to the QEMU -blockdev command line with machine versions >= 10.0. We accidentally use the throttled block node as the source of...
-
G_gabriel reacted to bbgeek17's post in the thread Disk migration speed is capped by disk read/write limits in PVE 9 with Like.
Hi @jnkraft , this thread may be somewhat helpful: https://forum.proxmox.com/threads/bandwidth-limits.161999/ Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
J@Jim, du hast einen Aussage-Satz noch vergessen: "Ich will mich damit auch nicht beschäftigen und Zeit investieren - das hat einfach so zu laufen"
-
JIch habe mir mal das ProxMenux auf einem Testsystem reingezogen. Das System nimmt dem Unbedarften so ziemlich alles ab, was man auf der Console machen kann und muss. Ist für die Noop recht einfach hier auf den vollen Helperscript-Katalog...
-
Ddimante replied to the thread Not getting good network throughput even with LACP bond." you're using "old" hardware for a relative modern OS: i440fx" so, these machines all were migrated from ESXi so what platform would you recommend setting it to? I hear you on the true LACP and that under a multithreaded load it balances...
-
shanreich replied to the thread Proxmox VE 9.1.1 with only a single ipv4, trying to make a NAT v4 for my VM/LXC containers.it's very likely that ufw could be interfering here, so I'd recommend turning it off completely - it's generally not advised to use ufw alongside PVE on the host since it can lead to issues like this. -
shanreich replied to the thread EVPN with multiple exitnodes and no primary exit node possible?.Can you try and set it manually for the uplink interfaces via the following command? echo 0 > /proc/sys/net/ipv4/conf/<UPLINK>/rp_filter This won't persist, but for testing purposes it would be interesting.
-
Mmathlin replied to the thread EVPN with multiple exitnodes and no primary exit node possible?.Sure root@gn-b1-pve05:~# head -n10 /proc/sys/net/ipv4/conf/*/rp_filter ==> /proc/sys/net/ipv4/conf/all/rp_filter <== 0 ==> /proc/sys/net/ipv4/conf/bond0.395/rp_filter <== 2 ==> /proc/sys/net/ipv4/conf/bond0/rp_filter <== 2 ==>...
-
TTreptower replied to the thread Kann ich eine VM über den HDMI Port meiner Hardware wiedergeben?.Chromium auf dem Host, also unter Debian installieren, welches dann eine GUI direkt auf dem Host ermöglicht. Auch im Fehlerfall ganz nützlich. Darüber könnte dann eine vorhandene VM per Konsole im Vollbildschirm dargestellt werden. Eine Variante...
-
Kktoczyski replied to the thread Google OpenID error.Yes, I know about it. Our configuration (domain has been removed)
-
-
Tthorsten.franke replied to the thread Hohe SWAP Auslastung.Hey, also Basics. Hardware sieht man ja schon oben im Screenshot, hänge ich aber nochmal an: Storage: Das ganze läuft komplett auf SSDs. Auf dem Server laufen 2 VM's. Die Konfig der ersten: Die Konfig des Terminalservers: Der...
-
-
shanreich replied to the thread EVPN with multiple exitnodes and no primary exit node possible?.Can you post the output of the following command? head -n10 /proc/sys/net/ipv4/conf/*/rp_filter I've seen occassions where simply setting net.ipv4.conf.all.rp_filter wasn't sufficient on PVE 9 anymore, so could you double-check that the setting...
-
TTobiWanKenobi replied to the thread ILOAmplifer PACK no networkconnection.please share, when you find a solution :cool:
-
Fferhat.oekten replied to the thread Proxmox 9.0/9.1 offiziell freigegeben/stabil?.Ok, danke! Hat sich geklärt.
