Latest activity
-
Fferhat.oekten reacted to news's post in the thread Proxmox 9.0/9.1 offiziell freigegeben/stabil? with
Like.
Hallo, ich verstehe da etwas nicht: * keine offiziellen Release Notes * keine APT-Repositories * keine Support-Subscriptions * keine Ceph-Kompatibilitätsmatrix für PVE 9 Wie ist das gemeint? Findet sich hier kleine Antwort auf deine... -
TTobiWanKenobi reacted to totalnoob's post in the thread ILOAmplifer PACK no networkconnection with Like.
I've read somewhere that filesystem can be mounted and network configs can be manipulated externally, haven't tried it yet though.
-
RRaudi replied to the thread [SOLVED] PVE 9.1.4 / NVIDIA Tesla T4 / vGPU 19.3 Installation.Nein lsmod listet den Treiber hier auch nicht mehr auf, aber auch nichts mit nvidia. Auf dem anderen Server (wo noch nichts installiert ist) taucht der nouveau Treiber noch auf...
-
IIsThisThingOn replied to the thread Hohe SWAP Auslastung.Fang mal mit den Basics an. Was ist deine Hardware? Wie ist dein Storage setup (ext4 und ZFS)? Was ist es für ein Terminalserver, der langsam ist? Welches OS, welche VM configs.
-
news replied to the thread Proxmox 9.0/9.1 offiziell freigegeben/stabil?.Hallo, ich verstehe da etwas nicht: * keine offiziellen Release Notes * keine APT-Repositories * keine Support-Subscriptions * keine Ceph-Kompatibilitätsmatrix für PVE 9 Wie ist das gemeint? Findet sich hier kleine Antwort auf deine... -
MMathieuMD posted the thread VNets ID length limited to 8 characters. Why? in Proxmox VE: Networking and Firewall.Why VNets ID are limited to 8 characters? Linux interfaces could have up to 15 characters, according to Linux network interface names have a length limit, and Netplan.
-
Fferhat.oekten posted the thread Proxmox 9.0/9.1 offiziell freigegeben/stabil? in Proxmox VE (Deutsch/German).Moin, ich wollte auf einem unserer Außenstandorte den Cluster von 8to9 upgraden. Bei den Vorbereitungen bin ich auf Informationen gestoßen, dass die Version noch nicht offiziell freigegeben sei, mit der Begründung: keine offiziellen Release...
-
Ddekiesel replied to the thread Firewall anderer LXC blockieren route von host zu gast.Ach mist, sorry, das war ein Schreibfehler (und ist oben korrigiert jetzt). Die IP ist `10.1.100.12`
-
Wwaltar reacted to bbgeek17's post in the thread Disk migration speed is capped by disk read/write limits in PVE 9 with Like.
Hi @jnkraft , this thread may be somewhat helpful: https://forum.proxmox.com/threads/bandwidth-limits.161999/ Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Jjnkraft replied to the thread Disk migration speed is capped by disk read/write limits in PVE 9.Hello! Thanks for confirming the bug. Will wait for a fix.
-
Wwaltar reacted to fiona's post in the thread Disk migration speed is capped by disk read/write limits in PVE 9 with Like.
Hi, thank you for the report! I can reproduce the issue here and will look into it. It's a regression from the switch to the QEMU -blockdev command line with machine versions >= 10.0. We accidentally use the throttled block node as the source of...
-
jsterr posted the thread [SOLVED] Validation and questions about iSCSI Config in Proxmox VE: Installation and configuration.Hello Members :-) Im not very experienced in integrating iscsi into pve so I had my first configuration and there where some unexpected behaviours. In the end everything including HA-Tests worked but there where some questions regarding the... -
Kkosnar replied to the thread Why i cant install WinSever 2012 R2 its keep let me install again and again.I don't understand the connection between original problem with installing WinSever 2012 R2 and with creating Win 10. Are you able to install WinServer 2012 R2? Is it working now? What it means "I can't create Win 10"? Can you better explain...
-
Ppvginkel posted the thread Swap usage while running backups in Proxmox VE: Installation and configuration.I'm doing backups from fast (NVMe) drives to slow (ATA; 5400 RPM 130 MB/s write). Presumably, as a result of this, swap space fills up when I run backups, and it's mostly VM memory that gets swapped out. I have 8 GB of swap configured and it...
-
DDarthVaddi replied to the thread [SOLVED] PVE 9.1.4 / NVIDIA Tesla T4 / vGPU 19.3 Installation.Ich nutze wohl secure boot, denn ich habe die hosts mit 9.1.4 installiert. lspci -d 10de: -nnk ist evtl das falsche Kommando. Ich habe lsmod verwendet. Und vor dem Treiber blacklisting war der nouveau Treiber eben noch gelistet.
-
Iiwik replied to the thread [TUTORIAL] PoC 2 Node HA Cluster with Shared iSCSI GFS2.So, now I know why GFS2 is unsupported from proxmox side... It works and performance was also very good, but it breaks after some time (more than half a year). Then it is pain, when everything is stuck and all pve nodes need to be restarted and...
-
RRaudi replied to the thread [SOLVED] PVE 9.1.4 / NVIDIA Tesla T4 / vGPU 19.3 Installation.Gib mal den Befehl: lspci -d 10de: -nnk bei dir ein, ich denke da wird der nouveau auch noch gelistet... Auf meinem anderen Server, auf dem noch nichts installiert ist, sieht das so aus: Subsystem: NVIDIA Corporation Device...
-
PPLHMK replied to the thread Error: "Couldn't find EFI system partition" when update.Ok, solved. Was a mistake with UEFI GRUB, solved with the help of AI Claude ... :D:D
-
Nnico1875p replied to the thread No internet in VMs or LXC containers..What you are describing is the behavior of a hybrid or access port on a managed switch, not of a dumb switch. A non-managed switch does not distinguish between tagged and untagged traffic; it simply forwards Ethernet frames as-is. To fix this...
-
Mmathlin posted the thread EVPN with multiple exitnodes and no primary exit node possible? in Proxmox VE: Networking and Firewall.Hello, We have a three node cluster running 9.1.2 with all three nodes as exit nodes. VMs inside the cluster can reach outside and back normally, but it is only if we have a primary exit node defined that nodes on the outside can ping and reach...