Latest activity
-
Mmicahel jiang reacted to IsThisThingOn's post in the thread ZFS storage is very full, we would like to increase the space but... with
Like.
This is another big trap. I already explained that one: So no you are correct, of course won't see 96TByte for your 8 wide 18TB RAIDZ2. You will see 6*18=108TB as your rightfully said so far we agree. But if you create a zvol with the 16k... -
Mmicahel jiang reacted to meyergru's post in the thread ZFS storage is very full, we would like to increase the space but... with Like.
Yes, However, I do not exactly know if Proxmox 8.4.1 already has the ZFS support to enlarge raidz1 arrays yet. It was added only in ZFS 2.3, AFAIR. The release notes say that ZFS is only at 2.2.7 with PVE 8.4...
-
Mmicahel jiang reacted to meyergru's post in the thread ZFS storage is very full, we would like to increase the space but... with Like.
That ZFS pool is not a JBOD, but a ZFS raid-z1 with one of the three SATA disks as redundancy. With the current ZFS versions on Proxmox 9, you can safely add new disks to this setup, provided that they are of the same size as the existing disks...
-
Ddvdwsn posted the thread High IO delay, system hang, crashing VMs in Proxmox VE: Installation and configuration.I recently started setting up some LXCs that use Option 3 from this thread to share network storage. [Tutorial] Mounting NFS share to an unprivileged LXC Last night one of the LXCs was doing a bunch of disk IO, and I tried to run the "pct set...
-
-
Eexcavate_tensors3000 reacted to flove's post in the thread How to disable auto-updates of /etc/hostsname, /etc/resolv.conf (& maybe others)? with Like.
I also ran into this after migrating all my LXD Ubuntu containers to Proxmox including a powerDNS container which is a good example why this behaviour is unwanted in some scenarious. If the container is configured for DHCP I would argue, this is...
-
Mmicahel jiang posted the thread when backup it shows "storage is not online" in Proxmox VE: Installation and configuration.Hi I have proxmox connected to a QNAP -1273au-rp via NFS (or SMB) for a storage. Use it to backup . I've seen this question raised repeatedly on the forum, but there's no definitive answer. The daily backups are half successful and half...
-
-
DThat looks awesome! The Vobot device depends on their cloud service, right ? If so, I am guessing it won't work on an isolated LAN or w/o Internet. Did you whitelist it or setup special firewall rules for it ? Fabián Rodríguez | Le Goût du...
-
DDAE51D replied to the thread Proxmox app for Vobot mini-dock device.Not at all. The Vobot is just this little ESP32 under the hood that runs micropython. It has WiFi built in so I just use my normal Proxmox API (and token) to connect. I am on a LAN (Vobot connected to my mid-tower Windows PC and Proxmox is a...
-
-
Nnibb13 reacted to xxcite81's post in the thread [SOLVED] No /boot after PVE 8 to 9 upgrade with Like.
@Aussiebob66 I had the same issue as you. Spent 6 hours trying to figure it out. This is what work for me in the end. Issues: Could not load the Proxmox Rescue, it would say some thing like "/boot/pve/v..." not found and would go back to the...
-
DDerEnderKeks replied to the thread Inofficial proxmox-backup-client RPM builds for RHEL-based distros.Excuse the delay, but I finally added EPEL10 builds, together with version 4.1.0. Due to broken dependencies it wasn't possible to rebuild the package previously.
-
BBR6 replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.I will give this a go and provide some feedback thanks
-
TTortillas replied to the thread [SOLVED] ZFS Issue : "protection error" thrown by the kernel.What mode/command did you use? I tried using the USB version by downloading their util and making a bootable usb, but after startup none of their seachest commands were recognized at all in either uefi or bios mode. I even tried mounting it to...
-
Mmtlcpu reacted to Tux_1024's post in the thread [SOLVED] Proxmox install (local) minimal install with Like.
Just put the desired size for your local storage in the maxroot box, leave everything else free, hit OK, continue the installation. Just keep in mind witch things are stored where, before making a decision how big or small the local storage...
-
Pp3ter_b replied to the thread Importing / migrating existing tag configuration from one datacenter to another?.I've ran grep -Ri "findme" /etc/pve/ on a tag "findme", and the custom-config (colors and all) seem to be stored in: /etc/pve/datacenter.cfg:tag-style: color-map=findme:fd6bd9:00cc00 The tags assigned to containers directly, are neatly stored in...
-
Pp3ter_b posted the thread Importing / migrating existing tag configuration from one datacenter to another? in Proxmox VE: Installation and configuration.Hi everyone! :) I'm super happy with tagging my machines in one PVE setup i've made. I'd now love to re-use /just the same/ config on a new PVE install. Where does Proxmox store the tag config, and can I just rsync-over-ssh copy that onto the...
-
MMerlin_of_Chaos replied to the thread broken update.unfortunately that didnt work heres the output of that also from other checks i have been advised to make we have found that getopt is missing and tar has a segmentation fault. so its quite possible this proxmox has had it
-
MMerlin_of_Chaos replied to the thread broken update.i can try that again and see what happens
-
Jjaminmc replied to the thread broken update.Have you tried an apt update && apt dist-upgrade? Sometimes regular apt upgrade can mess things up if there are disto changes that deal with dependancies.
-
Ssteve500 replied to the thread Mellanox ConnectX-6 (100GbE) Performance Issue – Only Reaching ~19Gbps Between Nodes.Did you ever resolve this?
-
009usr posted the thread Existing server no longer connects to network in Proxmox VE: Networking and Firewall.Hi, I've been running my proxmox home server for a while now, and I never had any issue connecting to the network. I've used this server across various networks, some of them fairly restrictive, and the server always does connect. However, now it...
