Latest activity
-
Ccomplexplaster27 replied to the thread Windows VM stuck on boot with CPU type set to host.https://forum.proxmox.com/threads/vm-reboot-issue-vm-stuck-on-proxmox-start-boot-option-screen.154925/#post-705799 Have a read of some this thread may help you
-
Jjamesdev replied to the thread s3 backup local cache.Disregard. I figured it out after reading through the docs again. You limit the size of the cache location. I just applied (probably overkill) zfs set quota=2T backup/s3-cache
-
SSteveITS replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..FWIW I called this out in another thread recently too. The pinning tool https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_using_the_pve_network_interface_pinning_tool says it will use nic* but also ends with paragraph, “It is recommended...
-
Jjdancer replied to the thread [Help] Dell R740 + Broadcom BCM5720 NDC - Ports Active (Lights On) but Not Detected by Proxmox.I use Dell Intel X550 rNDC in production without issues. Both the 2x1GbE-2x10GbE and 4x10GbE versions. The 10GbE uses the ixgbe driver and the 1GbE uses the igb driver. Use 'dmesg -t' to confirm. Obviously flash the rNDC to the latest firmware...
-
Ccraniumbox replied to the thread IO Pressure Stall issue after upgrade to 9.1.Im having the same issue.
-
Ccptwonton replied to the thread blank screen when installing VM.thanks for the suggestion Dominik, wish I had thought to do that yesterday. I tried just now, with console open, and proxmox decides it wants to behave. I've changed nothing about my cluster since posting yesterday, so really unclear why it's...
-
Jjohnny_blade reacted to dibec's post in the thread Proxmox shows high memory but the operating system is not using memory. with
Like.
i solved it with this tutorial: https://youtu.be/X-_jY-D7RiI -
Ddastrix80 replied to the thread rpool errors but system boots (rpool has detected an unrecoverable IO failure).Update: I moved the HBA to another slot and its all working now. Odd. For future, is there some reference to the card in config I need to know about?
-
PPouch6867 replied to the thread [SOLVED] Ceph Cluster vlan migration help requested.One other thing to note... if you have a management node that does not have an interface on your dedicated ceph vlan that node will not show ceph health properly... on the Datacenter Ceph page it will show "got timeout (500)" and on the nodes...
-
Ddastrix80 posted the thread rpool errors but system boots (rpool has detected an unrecoverable IO failure) in Proxmox VE: Installation and configuration.Hi All, Im using latest proxmox on 2 x Intel m2/nvme SSD Drives (brand new, 0% usage). This is for the system only - Mirrored/ZFS I also have 2 x Dell SAS SSDs for VM storage - Mirrored/ZFS System was all working nicely BEFORE I put the...
-
Jjulyat replied to the thread Bonded ethernet uplinks broken in pve-common 9.1.1.yes when we use qm start <VMID> we got no physical interface on bridge 'vmbrN' and it is not possible to start VMs now when using bond as physical interface for vmbr
-
UIt is rather a controversial question. For me : do not do that. Data and disk integrity will be involved in mid term. In order to avoid this, you will have to tune the installation and the swap and it will lead to a custom system to maintain. As...
-
WWichets replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..as i can see in /etc/network/interfaces have no vlan ware config enable. In this case, You must enable VLAN Aware on vmbr0. and end sure that connect vlans trunk port to nic0 or enp1s0f0 to vmbr0. /wichet s.
-
Kk-123 replied to the thread SpamAssassin changes not picked up.did you restart `pmg-smtp-filter` service to after changes written?
-
Jjacksonwashere replied to the thread Issues with 6.17.2-1-pve.I can't do this I'm stuck in a "apt --fix-broken install" loop: dpkg: error processing package proxmox-kernel-6.17 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: proxmox-kernel-6.17 Error...
-
FHello, we are are experiencing a large number of OSD errors. This errors all occured during backup of the VMs on the cluster. We maneged to get the OSD to work again and stop showing the error, but we want to troubleshoot why this is happening...
-
Hhuitheme replied to the thread Plugging in or unplugging the network cable will cause the PVE system to completely lose network connectivity..Attempting again to disable EEE via ethtool. Disable EEE ethtool --set-eee nic0 eee off Verification: ethtool --show-eee nic0 Expected output: EEE status: disabled Awaiting verification, looking forward to sharing good news. I have a...
-
Fflames reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments...
-
Ddbondarchuk posted the thread Windows VM stuck on boot with CPU type set to host in Proxmox VE: Installation and configuration.Hi! I am in the process of upgrading my old Proxmox server that was housing my Windows VM for gaming purposes. It had an i7-8700 with RTX 3060. It was in a large 4U case and was getting quite slow. As I wanted something smaller and a bit more...
-
Hhuitheme replied to the thread Plugging in or unplugging the network cable will cause the PVE system to completely lose network connectivity..I suspect it might be an issue with the IGC driver. nano /etc/modprobe.d/igc.conf options igc disable_eee=1 reboot dmesg | grep igc root@nuc:~# dmesg | grep igc [ 1.211391] igc: unknown parameter 'disable_eee' ignored [ 1.211824] igc...