Latest activity
-
Jjohnny_blade reacted to dibec's post in the thread Proxmox shows high memory but the operating system is not using memory. with
Like.
i solved it with this tutorial: https://youtu.be/X-_jY-D7RiI -
Ddastrix80 replied to the thread rpool errors but system boots (rpool has detected an unrecoverable IO failure).Update: I moved the HBA to another slot and its all working now. Odd. For future, is there some reference to the card in config I need to know about?
-
PPouch6867 replied to the thread [SOLVED] Ceph Cluster vlan migration help requested.One other thing to note... if you have a management node that does not have an interface on your dedicated ceph vlan that node will not show ceph health properly... on the Datacenter Ceph page it will show "got timeout (500)" and on the nodes...
-
Ddastrix80 posted the thread rpool errors but system boots (rpool has detected an unrecoverable IO failure) in Proxmox VE: Installation and configuration.Hi All, Im using latest proxmox on 2 x Intel m2/nvme SSD Drives (brand new, 0% usage). This is for the system only - Mirrored/ZFS I also have 2 x Dell SAS SSDs for VM storage - Mirrored/ZFS System was all working nicely BEFORE I put the...
-
Jjulyat replied to the thread Bonded ethernet uplinks broken in pve-common 9.1.1.yes when we use qm start <VMID> we got no physical interface on bridge 'vmbrN' and it is not possible to start VMs now when using bond as physical interface for vmbr
-
UIt is rather a controversial question. For me : do not do that. Data and disk integrity will be involved in mid term. In order to avoid this, you will have to tune the installation and the swap and it will lead to a custom system to maintain. As...
-
WWichets replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..as i can see in /etc/network/interfaces have no vlan ware config enable. In this case, You must enable VLAN Aware on vmbr0. and end sure that connect vlans trunk port to nic0 or enp1s0f0 to vmbr0. /wichet s.
-
Kk-123 replied to the thread SpamAssassin changes not picked up.did you restart `pmg-smtp-filter` service to after changes written?
-
Jjacksonwashere replied to the thread Issues with 6.17.2-1-pve.I can't do this I'm stuck in a "apt --fix-broken install" loop: dpkg: error processing package proxmox-kernel-6.17 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: proxmox-kernel-6.17 Error...
-
FHello, we are are experiencing a large number of OSD errors. This errors all occured during backup of the VMs on the cluster. We maneged to get the OSD to work again and stop showing the error, but we want to troubleshoot why this is happening...
-
Hhuitheme replied to the thread Plugging in or unplugging the network cable will cause the PVE system to completely lose network connectivity..Attempting again to disable EEE via ethtool. Disable EEE ethtool --set-eee nic0 eee off Verification: ethtool --show-eee nic0 Expected output: EEE status: disabled Awaiting verification, looking forward to sharing good news. I have a...
-
Fflames reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments...
-
Ddbondarchuk posted the thread Windows VM stuck on boot with CPU type set to host in Proxmox VE: Installation and configuration.Hi! I am in the process of upgrading my old Proxmox server that was housing my Windows VM for gaming purposes. It had an i7-8700 with RTX 3060. It was in a large 4U case and was getting quite slow. As I wanted something smaller and a bit more...
-
Hhuitheme replied to the thread Plugging in or unplugging the network cable will cause the PVE system to completely lose network connectivity..I suspect it might be an issue with the IGC driver. nano /etc/modprobe.d/igc.conf options igc disable_eee=1 reboot dmesg | grep igc root@nuc:~# dmesg | grep igc [ 1.211391] igc: unknown parameter 'disable_eee' ignored [ 1.211824] igc...
-
Llitome replied to the thread [SOLVED] Hello, I have a question about the noVNC 401 (No Ticket) error..как?
-
Ccomplexplaster27 replied to the thread OpenFabric: Could not find two T0 routers log spam after migration? (And VM access question).I noticed that I get about double the amount of spam for this, I have both Full Mesh Ceph and Full Mesh Cluster networks in my case so it seems to generate this event for each fabric you create see: vtysh -c "show openfabric topology" Area...
-
Rreukiodo reacted to vmcms's post in the thread node restart and automatically migrate VM's (HA) with Like.
Thank you all for this super helpful thread, you are all thoughtful & think stuff through :) I have 3 nodes, two are AMD Epic, one is older Dell XEON. I wanted the 3rd node to be very different hardware and that has been super useful when a...
-
Rreukiodo reacted to SteveITS's post in the thread node restart and automatically migrate VM's (HA) with Like.
Use a common CPU type to both, like x86-64-v3. https://pve.proxmox.com/pve-docs/chapter-qm.html#qm_cpu
-
Rreukiodo replied to the thread Proxmox on SD card.In our case, we use SATA DOMs and Samsung's Pro Endurance SD cards with the combination of the zram-config mentioned above. Aside from a not-as-easy-install of zram-config, the performance and durability is great. We have been running this way...
-
JJohannes S reacted to meyergru's post in the thread ZFS storage is very full, we would like to increase the space but... with Like.
Being a german, I know that german saying... As you saw, the actual real-world results with a volblocksize of 128k do not show what the theory says. On a side note, I have a Proxmox Backup Server VM with a 2TByte data disk on the same raidz2...