Latest activity
-
fba replied to the thread Looking for a free 10 Gb/s firewall, on VM Proxmox..Hi, I usually have IPFire in use, which has a quite current Linux Kernel as base: https://www.ipfire.org/ But I cant make any statements regarding your throughput requirements. -
MIs there a way to mount a read-only NFS share into Proxmox VE? We have a NFS share, where we collect all our needed .iso files. This share is presented as "read-only" for all all machines, that need an iso from it. Is there a way to use this in...
-
spirit replied to the thread IO Pressure Stall issue after upgrade to 9.1.you shouldn't use consumer ssd like Samsung evo with zfs. zfs is doing synchronous write, and consumer ssd don't have a supercapacitor to keep sync writes in memory cache before writing the nand cell. (it's really something like 200~400iops on... -
Kkaveesha kaushan posted the thread [Help] Dell R740 + Broadcom BCM5720 NDC - Ports Active (Lights On) but Not Detected by Proxmox in Proxmox VE: Installation and configuration.Hi everyone, I am setting up a Dell EMC PowerEdge R740 with Proxmox VE 8. I have run into a specific networking wall that I can't seem to break, and I'm looking for a "final check" before I swap out hardware. The Situation: Success: I can...
-
Ppavlos replied to the thread Proxmox Datacenter Manager 1.0 (stable).Do you plan to provide a script pdm-nag.sh (like pve-nag.sh) since the banner "No valid subscription" takes a lot of real estate? thank you.
-
dcsapak replied to the thread Intel vGPU and Proxmox.I'm currently trying to get some of these and want to write a how-to guide, no promises if/when that arrives though. Also I'm not sure if it works at all with our current supported kernels, have to test first. -
JJohannes S reacted to alexskysilk's post in the thread Bind9 Installation fails using Proxmox 9.0 with
Like.
there may be an issue with bind and trixie, BUT you really dont want to run bind on your hypervisor anyway. put in on a vm or container. -
JJohannes S reacted to Impact's post in the thread "Storage" Anzeige im "Rechenzentrum" nach Backups with Like.
Was soll ich mit dieser Übersetzung anfangen? Teile bitte pvesm status df -hT sowie ein Bild dieser erwähnten Einstellung.
-
DDerekG replied to the thread [SOLVED] kernel: landlock - Error on VM boot - assistance required.The system is booting into TrueNAS, I can hear the sequence of the drives as the zfs initializes them. The problem appears to me as no network access to the TrueNAS VM, not via the web, the console or the network shares. The VM is using the...
-
HHeizungsbauer posted the thread [SOLVED] Kein Zugriff - DNS Problem? in Proxmox VE (Deutsch/German).Hallo an alle, ich habe ein nerviges Problem das ihr evtl. schon mal gehört habt. Mein Proxmox verliert immer wieder das Netzwerk, sprich ich komme weder auf den Host noch auf die VMs/Container mit der IP. Wenn ich Proxmox oder meine Fritzbox...
-
Aatatury replied to the thread Bind9 Installation fails using Proxmox 9.0.Hello all, Adding "NotifyAccess=main" to the bind9 service file doesn't appear to solve this problem. Nothing changes and still it gives: named[12440]: named: failed to connect to notification socket '/run/systemd/notify': permission denied...
-
MMarceldrzal replied to the thread Linux Rechner weiß nicht was das ist?.wo sehe ich das?
-
cwt reacted to TTdriver's post in the thread [TUTORIAL] Update Samsung consumer SSD/NVME firmware in Proxmox with Like.
Created an account just to reply and say thank you cwt. This helped me update from 4B2QJXD7 and i hope that helps my drive stop disappearing. Also, aliis.jh was right. It went exactly how they said with apt install unzip and it working right... -
EEduardo Taboada reacted to moonsorrox's post in the thread I can't access the web interface. with Like.
Thank you for your support, and yes, I was able to ping the LXC.However, I'm now running the PDM in a VM using the corresponding ISO file, and it's working perfectly.
-
Ccodyrocco posted the thread Adding network card second port to SR-IOV bridge in Proxmox VE: Networking and Firewall.I have a dual port network card, x710 based, with two pf - enp1s0f0np0 and enp1s0f1np1, which are bridged in vmbr0: - enp1s0f0np0 have 8 vf, with some vm using them as passtrough pcie devices - enp1s0f1np1 have no vf - using it basically as a...
-
TTDW0kxvche9 replied to the thread PBS Tape Backup - New to this, questions regarding job config.Thank you - with 20 days, the Backup is running :-)
-
JJohannes S reacted to SteveITS's post in the thread 40 node prod cluster restarts when joining a new node or removing. with Like.
Based on my experience with a small cluster when we were getting started, we had no issues doing it on a live system and following the directions. We added another link then as a second step changed the order as I recall, so the new one was...
-
JJohannes S reacted to SteveITS's post in the thread 40 node prod cluster restarts when joining a new node or removing. with Like.
@aomer786 There have been various posts here about max cluster size, like the one linked above. The concern with corosync is latency not bandwidth. So if enough milliseconds go by the node is considered to not be responding. A NIC can't send...
-
JJohannes S reacted to fweber's post in the thread 40 node prod cluster restarts when joining a new node or removing. with Like.
Hi, from a quick look, the "Retransmit" messages may be a symptom of network stability issues (e.g. lost packets, increased latency etc) that are more likely to occur if corosync shares a physical network with other traffic types -- I'd expect...
-
JJohannes S reacted to meyergru's post in the thread [SOLVED] Seit Upgrade von Proxmox VE 8.4... auf 9.1.2: Höhere CPU‑Last bei Backups und allgemein höhere Serverlast with Like.
Bist Du sicher, dass das nicht nur so aussieht, weil bei den älteren Daten offenbar die Glättung stärker ist? Man sieht das in der Grafik ziemlich klar. Wenn Du die kurzen Peaks im rechten Teil über längere Zeitabschnitte streckst (so wie links)...