Latest activity
-
BBylekzra replied to the thread Can't use pve web panel through Cloudflare tunnels..Thank you. I solved the problem thanks to your method. My English is poor. You should create a guide for everyone, covering both Cloudflare and Proxmox.
-
BBylekzra reacted to Hurula's post in the thread Can't use pve web panel through Cloudflare tunnels. with
Like.
Really worked for me, that menu is now on here. -
Sshodan posted the thread Making root volume live in the lvm thin pool ? in Proxmox VE: Installation and configuration.Hi, I am using a space constrained system. Fresh install of proxmox uses 70GB, thick provisioned and it's difficult to reclaim this space for use by the thin pool while also not risking to run out. So I think the solution would be that root...
-
bbgeek17 replied to the thread Proxmox Netapps Top of Rack.Although you have not provided the requested information, the additional details you did provide point to a not-ideally configured network infrastructure. Are you working with your network team specialist? If not, you should definitely review... -
Aaliis.jh reacted to TTdriver's post in the thread [TUTORIAL] Update Samsung consumer SSD/NVME firmware in Proxmox with Like.
Created an account just to reply and say thank you cwt. This helped me update from 4B2QJXD7 and i hope that helps my drive stop disappearing. Also, aliis.jh was right. It went exactly how they said with apt install unzip and it working right...
-
Iismikes replied to the thread [TUTORIAL] Tutorial: Unprivileged LXCs - Mount CIFS shares.Might someone update this for VE 9 & 9.1 using the GUIs Resources tab?
-
Eebiss reacted to gyptazy's post in the thread [TUTORIAL] ProxLB - (Re)Balance your CT/VM workloads across nodes in your Proxmox cluster with Like.
Introduction ProxLB (PLB) is an advanced tool designed to enhance the efficiency and performance of Proxmox clusters by optimizing the distribution of virtual machines (VMs) or Containers (CTs) across the cluster nodes by using the Proxmox API...
-
Kto necro an old thread, the question is, why isn't q35 the default, and why isn't there a way we can configure proxmox defaults how we like them?
-
Aalexskysilk replied to the thread ZFS storage is very full, we would like to increase the space but....Most likely yes. It tooks me a second to read the above discussion when I realized they're no longer speaking in terms of your question. The answer to your question depends on other factors you didnt mention, namely: 1. are you trying to...
-
JHi, Thank you for your help. I'm not using API very often so i didn't think of it. I was able to create account very easyly with curl -H 'Authorization: PDMAPIToken TOKENID:TOKENKEY' -d 'contact=' -d 'directory=' -d 'name='...
-
Ddazmac replied to the thread Proxmox Netapps Top of Rack.Initially we were using LACP with the 2 X 9500 switches. When the switches were restarted after an IOS Upgrade. Proxmox lost connectivity with Netapps. We had to restart all the VMs in Proxmox. We changed the configuration not to use LACP We...
-
Aadystech replied to the thread updated to PVE 9.0 then GPU passthrough stopped working on Windows.sir, you are a life saver!! I had not tried the legacy part before,, So I went from hostpci0: 0000:00:02.0 localtime: 1 machine: pc-q35-10.0 vga: std,memory=512 to hostpci0: 0000:00:02.0,legacy-igd=1,romfile=igd.rom localtime: 1 machine...
-
-
TTTdriver replied to the thread [TUTORIAL] Update Samsung consumer SSD/NVME firmware in Proxmox.Created an account just to reply and say thank you cwt. This helped me update from 4B2QJXD7 and i hope that helps my drive stop disappearing. Also, aliis.jh was right. It went exactly how they said with apt install unzip and it working right...
-
Aadystech reacted to LongQT-sea's post in the thread updated to PVE 9.0 then GPU passthrough stopped working on Windows with Like.
@adystech As long as you meet the Requirements and use legacy mode passthrough, it will work. Edit: Windows VM must use OVMF/UEFI boot.
-
raidz needs to store parity information somewhere (in blocks of size at least the pool's ashift, which usually nowadays is 12 so 4k). zvols by default use a very small blocksize (8k). if you write a single 8k block to the zvol, and use raidz2... -
Bbobjoe123456 replied to the thread Web UI reports critical memory usage, just caching.Well yeah the graph is correct but this stat probably shouldn't include cached ram:
-
-
makkusu replied to the thread [TUTORIAL] Fedora CoreOS on Proxmox.You can also just upload your ignition file to pastebin or a github and feed the coreos installer the raw link. Especially nice to have when your using some random VPS instead of your own PVE. -
bbgeek17 replied to the thread Proxmox Netapps Top of Rack.Hi @dazmac , Perhaps you can clarify your inquiry: - Are both sides (Netapp and PVE) using LACP? - Are the 9500 MLAG connected? - I am not overly familiar with variations of the ISSU, why have you highlighted 5 seconds? Are there other options...
-
Kkiler129 replied to the thread Linux Kernel 6.18 is LTS (but not LTS on Ubuntu yet): Inclusion in PVE Test Repo?.Just adding 2 cents here, as v6.18 is quite important for hypervisors using KVM. Looking into v6.18 may have several benefits, specifically in performance department. For AMD servers with proper x2avic support (Zen 4 and newer), the "options...
-
fstrankowski replied to the thread Web UI reports critical memory usage, just caching.Looks totally fine to me. You're using roughly 60GB without L2ARC, rest is L2ARC usage (~ 170GB) + some remaining free GB (~ 20). I see absolutely nothing wrong here. The graphs have different color. If you hover over these graphs it will tell...
-
