Latest activity
-
JJohannes S reacted to meyergru's post in the thread ZFS storage is very full, we would like to increase the space but... with
Like.
Sorry, but IMHO the article you cite is mostly incorrect or at least misleading in practice: The article is irrelevant because its calculations are based on unrealistic assumptions, treating every write as a tiny 4 kB block and ignoring how ZFS... -
DDacron replied to the thread Computer shutting down every morning around 3 that I didn't set to happen..I have no idea what all this means sorry
-
-
JJohannes S replied to the thread How can I access data of one LXC container from an other container?.As explained by leesteken you will need to use bind mounts for this, it's explained in the wiki: https://pve.proxmox.com/wiki/Linux_Container#_bind_mount_points
-
Mm4tt.io replied to the thread Problem with GPU Passthrough (AMD RX 9060 XT).That's exactly what's happening, lspci only shows the PCIe bridge: 03:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev 25) 04:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi...
-
Mm4tt.io reacted to uzumo's post in the thread Problem with GPU Passthrough (AMD RX 9060 XT) with Like.
The RX90XX won't work on older motherboards because they lack BIOS support. I encountered the same issue with the X10SRM-TF in the past. I've seen similar reports on forums (involving cheap Chinese X99 motherboards) and have shared this...
-
Mmeyergru replied to the thread ZFS storage is very full, we would like to increase the space but....Your clarifications are helpful, and I agree on several important points: We are talking about zvols, not datasets. Zvols have a static volblocksize, and unlike datasets they cannot coalesce multiple logical blocks into a single larger record...
-
EEideen replied to the thread Invalid ARP responses cause network problems.I had problems with IPV6 would take 6.5 hours to function after my virtual pfsense routere got a new ipv6 address pool using the Replies only if the IP is on the incoming interface AND the source IP matches the subnet of that incoming interface...
-
EEduardo Taboada replied to the thread H330 sas controller failed after upgrading to Kernel 6.17.2-2-pve.Are you booting BIOS or UEFI?
-
I@IsThisThingOn, du triffst den Nagel auf den Kopf. Das ist der klassische "Perfect Storm": Der Windows-NFS-Client ist per se ineffizient (Locking/Sync), und das dann kombiniert mit VM-Disk-Images auf einem ZFS-Dataset (CoW-on-CoW) potenziert die...
-
Iichia posted the thread HELP !!! Live Migration (VM based on NIC SRIOV VF) feature, seeking a solution . in Proxmox VE: Installation and configuration.My application scenario is as follows: 1: The cluster consists of 3 hosts, all of which have Ceph enabled The kernel version in PVE for the three hosts is: Linux 6.8.12-17-pve The PVE version is: proxmox-ve: 8.4.0 pve-manager: 8.4.14 2...
-
-
IIsThisThingOn replied to the thread ZFS storage is very full, we would like to increase the space but....That is not what it does. I unrealistically assumes that a 16k volblock is not compressable and because of that always a 16k write. It does not assume every write to be a tiny 4k block. It assumes a 4k sector size. I did not know about that. Do...
-
spirit replied to the thread Frr update to 10.4.1-1 broke external routing?."I'm assuming defining static routes to get back to the VMs from external is perfectly okay, but we're going to see about getting bgp set up on our switches" If you want to reach the evpn network from outside, if need indeed routes to the evpn... -
MMChristen replied to the thread Free vs Paid in term of features is there differences?.Hi I'm new, hosted my private email infra on prem and in cloud (handled all by myselfes which becomes complex to maintain over time. I try to simplify and try to switch to PMG to have one internet faced gateway handling the stuff. PMG looks nice...
-
spirit replied to the thread Frr update to 10.4.1-1 broke external routing?.the "evpn controller", is deploying config for evpn+bgp (they are only a bgp daemon in frr, but different peers for bgp or evpn layer), with same ASN for both evpn/bgp peers. but if you need create custom bgp configuration (e-bgp...
-
Ccarles89 replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.Same here, but with fully updated PBS 4.1 and enterprise repos. The server is an HP DL360 Gen10+, and the RAID controller an HP MR416i-a Gen10+. When the server hits the issue, we have to do a hard reset since some processess get stuck in D...
-
Ccarles89 reacted to jdancer's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with Like.
Actually had to pin 6.14.11-4 kernel on PBS instances. 6.17.2-1 was giving intermittent issues on BOSS-S1.
-
MMennoMega posted the thread CD drive mount issues in windows with long ISO name in Proxmox VE: Installation and configuration.HI there, Just a reminder for the proxmox coders out there. When you mount a cd-drive ISO from the LOCAL storage with the name : 26100.2314.241105-1703.GE_RELEASE_SVC_PROD1_SERVER_X64FRE_EN-US.ISO It won't mount in windows server 2025 .. nothing...
-
Nnoidea replied to the thread Speicherverteilung (Bootdisk-Größe).Ah. Ok, diese Rechnung verstehe ich natürlich. Aber wo kommt diese Größe von 58,28GB her? Habe ich die mal selber angelegt, als ich Proxmox installiert und eingerichtet habe? Denn die Festplatte selber hat ja eine Größe von 128GB.
-
Ttbomb456 replied to the thread H330 sas controller failed after upgrading to Kernel 6.17.2-2-pve.After editing grub to have intel_iommu=pt, i am still having this issue [ 7.458995] megaraid_sas 0000:41:00.0: Ignore DCMD timeout: megasas_get_ctrl_info 5389 [ 7.459264] megaraid_sas 0000:41:00.0: Could not get controller info. Fail from...
-
Ttotalizator reacted to B.Otto's post in the thread [SOLVED] Unexpected change of fingerprint with Like.
Do you backup to a Proxmox Backup Server instance and did you change (renew) the SSL certificates of the PBS? That does change the fingeprint. Adding a PBS via fingerprint is only needed if you use a self-signed certificate. If instead you use a...
