Latest activity
-
CCAAD replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.Unfortunately, I was able to use the igpu for some gameplay, emulation and other graphical uses. The 610m indeed is inadequate and artifacts everywhere to a point where it heavily distorts the picture. Ill look at some dgpu options and will go...
-
CCris12345 replied to the thread pvestatd.pm/rebalance_lxc_containers - NUMA awareness?.It's clear that Proxmox's algorithm doesn't support EPYC CPUs well, especially those with many CCDs. I'm using a dual EPYC 7763: I also have another dual 8272CL CPU. My EPYC CPU has 2.5 times the number of cores as the 8272CL, but when running...
-
LLongQT-sea replied to the thread updated to PVE 9.0 then GPU passthrough stopped working on Windows.@adystech As long as you meet the Requirements and use legacy mode passthrough, it will work. Edit: Windows VM must use OVMF/UEFI boot.
-
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.After making vmbr0 VLAN-aware on that first node, I applied the network config, then applied the SDN config, and the problem VLAN worked on that node again. The /etc/network/interfaces.d/sdn file was simplified to: #version:8 auto vnetC iface...
-
Hhandfish replied to the thread [SOLVED] No /boot after PVE 8 to 9 upgrade.Thanks @xxcite81 ! Instructions worked for me, though I couldn't mount the root partition directly: I had to use the root path and not the device (/devnvme0n1p3 for me). I used SystemRescue, as the Rescue Boot wasn't working at all for me.
-
Uuzumo replied to the thread Problem with GPU Passthrough (AMD RX 9060 XT).The RX90XX won't work on older motherboards because they lack BIOS support. I encountered the same issue with the X10SRM-TF in the past. I've seen similar reports on forums (involving cheap Chinese X99 motherboards) and have shared this...
-
Uuzumo replied to the thread Unusual setup: Proxmox with only one VM, how to maximize KVM performance without "hurting" the host?.I understand that on older CPUs, disabling vulnerability mitigations prevents performance degradation. However, I see many people disabling them on newer CPUs as well. *With Zen5, you won't notice any difference. With Zen4, you might notice a...
-
TTaz-Matt reacted to jory's post in the thread local-LVM not available after Kernel update on PVE 7 with
Like.
I can confirm that increasing the timeout in /etc/udev/udev.conf also fixed this issue for me. (5 TB external USB drive) -
Uuzumo reacted to UdoB's post in the thread Unusual setup: Proxmox with only one VM, how to maximize KVM performance without "hurting" the host? with Like.
Probably. But why? The kernel is optimized with years of development to distribute compute power in a sane manner. Usually it is plainly wrong to believe that you know it better. (Exemptions just confirm this rule.) No. If you only allow...
-
JJoshua M posted the thread Hard disk spins up every 30 minutes in Proxmox VE: Installation and configuration.I had PVE and PBS co-hosted and running fine for a few months. Yesterday, the computer locked-up and I had to restart it. After re-starting, the hard disks spin up every 30 minutes only to sleep again shortly afterwards. All installation and...
-
Eertanerbek replied to the thread Win 10 VDI w/GPU Passthru - Desktop Lag/Jitter Troubleshooting.Thank you for your feedback, after two years problem continue but seems ok with intel-hda driver..
-
Ttranxene50 replied to the thread Unusual setup: Proxmox with only one VM, how to maximize KVM performance without "hurting" the host?.Long story short (1/2): - @UdoB: many thanks for your answers, took me awhile to understand them and then agree with you - Dunning–Kruger effect gently reminded me that I was just a "noob" because yes, I am new to Proxmox - reading again (and...
-
Eertanerbek reacted to garlicknots's post in the thread Win 10 VDI w/GPU Passthru - Desktop Lag/Jitter Troubleshooting with Like.
Somehow I managed to get rid of ich9 PCIe host ports as well on one of my machines. Can't successfully recreate and don't know if it's worth doing but thought it was kind of interesting I've almost completely eliminated the stutter, but it's not...
-
Aadystech replied to the thread updated to PVE 9.0 then GPU passthrough stopped working on Windows.Tried your rom file too.. (thank you for putting in the effort by the way) args: -set device.hostpci0.bus=pci.0 -set device.hostpci0.addr=2.0 -set device.hostpci0.x-igd-opregion=on hostpci0: 0000:00:02.0,romfile=igd.rom Windows boots, but still...
-
Ccosine replied to the thread Adding GPU Causes NIC Card to Stop Working.100%. I am loving learning proxmox, it's a blast, but things like this, after 20 years working with VMware, show a systemic brittleness that is really alarming.
-
Mm4tt.io replied to the thread Problem with GPU Passthrough (AMD RX 9060 XT).Thank you, I think that I'm going to return it back to the seller, I was doing some tests and the system is not displaying anything when I remove the NVIDIA GPU, probably it's defective.. Or it's not compatible with my system at all.
-
Sstuartthebruce posted the thread Live migration occasionally fails with QEMU assertion failure in Proxmox VE: Networking and Firewall.Testing a new PVE9 cluster with high-speed (2x400G LACP) network connections has shown that live migration of large VMs will occasionally fail with, QEMU[949247]: kvm: ../util/bitmap.c:167: bitmap_set: Assertion `start >= 0 && nr...
-
news replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.Can you please run this for my clearness: zfs list -t snapshot,filesystem -r nvme-2tb/vm-130-disk-1 -
Wwissens-hunger replied to the thread Proxmox 8 Upgrade auf 9 Fehler im Log Fenster bei einem LXC.Hallo @Bu66as Vielen Dank und eine Erleuterung. Ja, der LXC fährt sauber herunter. Zumindest was ich sehe und beurteilen kann. Das Heist kann den „Bug“ proxmox fixen? Mein Test LXC hat diese Config: #10.10.1.11/admin arch: amd64 cores: 2...
-
news replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.please read root@pve02:~# zfs list NAME USED AVAIL REFER MOUNTPOINT nvme-2tb/vm-130-disk-1 944G 659G 436G - your zfs dataset vm-130-disk-1 use 436G and hat also 944G = 436G + X, with snapshot...