Latest activity
-
KKegelcizer reacted to jerry4on's post in the thread [SOLVED] USB passthrough: device shows up but hard disk is not listed with
Like.
Resolved!!! I have to disable UAS driver and use 'usb-storage' only to make it work: root@ubuntu-vm:/etc/modprobe.d# cat blacklist-uas.conf blacklist uas root@ubuntu-vm:/etc/modprobe.d# cat usb-storage-quirks.conf options usb-storage... -
RRytecbe reacted to UdoB's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
I'm not using one, but I have a question: that seems plausible during setup, but during operation? Is ssh-access actually used for a QDev "doing its thing"? If not one could disable it after installation... My (possibly wrong) understanding was...
-
FFirstSoul replied to the thread Backup extrem langsam nach unbestimmter Zeit - Einbruch Transfer.Das dachte bzw wusste ich schon. Aber das es so krass ist? Junge... Leider hat mein Server aktuell keine Kapazitäten mehr für 2-3 SSDs. Keine PCIe Slots mehr und keine SATA oder m2 Slots. Der 1+0 sollte schon viel machen, doch da geht mir einiges...
-
Rrahman replied to the thread PBS pull sync job slows down about x20 after a while..OK, But the stable speed continued for about 4-5 hours then 8-9 hours second time without a problem as seen in the graphs. So I'm not sure if this is about network buffers.
-
Rromand reacted to them00n's post in the thread Issue on nodes pvestatd[616102]: storage 'PROXMOX_SSD_1' is not online with Like.
We found issue on our network, IP address conflict, it seems that we have solved this for now
-
EEduardo Taboada replied to the thread PBS pull sync job slows down about x20 after a while..iperf show performance in a short time, but as i told, if the buffers of the network equipment collapse the speed will be reduced. Also will be a reduced time if the destination PBS cannot write so fast. I experienced the buffer collapse with...
-
RRebelSys replied to the thread Anyone using Ceph & MSSQL Server?.Hi RuKlaw, We are also planning to deploy a MS SQL server on a Ceph/Proxmox cluster. How did it work out for you prefomance wise? Did you stay on Ceph with your SQL?
-
Wwimp9849 reacted to fabian's post in the thread TASK ERROR: connection error: not connected with Like.
that is tracked in https://bugzilla.proxmox.com/show_bug.cgi?id=6195
-
BAre you guys sure you or a colleague didn't add this by yourselves? It's not part of the PMG default configuration as far as I can tell, but it has been recommended several times in the past here on the forums. Just to confirm, I just...
-
Ssirnerox replied to the thread NOVNC only starts on V4 and is not reachable via V6.I want to clarify this. From my findings it looks like proxmox is using the GNU Netcat that only supports v4, but their is a port that was called Netcat6 that also should support IPv6 without any problem. Maybe they should look into implementing...
-
MMagnus-mercer replied to the thread Import feature does not support extracting tar/tar.gz images.I usually connect to the Proxmox host via SSH, download the archive file directly to the templates/import directory, extract it, and then use `qm importdisk` to import the generated disk file. To be honest, this process is quite cumbersome.
-
Kkiwistagnz replied to the thread PVE 9.1 upgrade: Connection error 596: Connection timed out.Status data from cluster config: $pvecm status Cluster information ------------------- Name: SiX Config Version: 8 Transport: knet Secure auth: on Quorum information ------------------ Date: Thu Dec 11...
-
FTo make this clear, if one gets the error message "requires a CPU with AVX support": as in: [10:24am] [mac@sparrow] /home/mac/devops/chat> docker logs -f --tail 10 chat-mongodb-1 see https://jira.mongodb.org/browse/SERVER-54407 see also...
-
Rrahman replied to the thread PBS pull sync job slows down about x20 after a while..This is local network with 0.1-0.2 ms ping latency, All MTU's are default 1500 and iperf can consume 10Gbit/s between two PBS.
-
Ingo S replied to the thread Exzessive Kernel Log Meldungen.Leider gibt es für diese Server keine aktuellere Firmware mehr. Es handelt sich um ein Supermicro X10DRi, also super alt. Ich hab es gerade geprüft, auf allen Servern mit diesem Board tritt das Problem auf. Ist also definitiv irgendwas mit der... -
EEduardo Taboada replied to the thread PBS pull sync job slows down about x20 after a while..It can be a problem of network congestion (packet loss/retransmissions), high latency or a problem with the buffers of your network equipment. If these problems occurs, then the TCP window size will be reduced. How are the MTU settings? Try to do...
-
JJohannes S replied to the thread Temperature.Sorry, missed that comment, thanks for the hint. . i think adding this information to the API is a good thing since it makes it easier to implement this functionality in third-party-monitoring (e.G. pulse, ProxmoxVE-specifig plugins for...
-
Bbicker replied to the thread PVE9: Coral Driver install script.root@pve:~# git clone https://github.com/feranick/gasket-driver Cloning into 'gasket-driver'... remote: Enumerating objects: 879, done. remote: Counting objects: 100% (256/256), done. remote: Compressing objects: 100% (32/32), done. remote: Total...
-
Rrdd2 replied to the thread [TTM] Buffer eviction failed.Oh man, I just ran into this one yesterday and it cost me hours(!) until I nailed it down. Its a TrueNAS Scale VM running 6.12.15-production+truenas and it was having trouble getting zvols provisioned by democratic-csi. The zfs commands it fires...
-
Mmikiz replied to the thread Can not create snapshot it says already exists.These problems occur the migrated vm not the reguler vm created in proxmox ve.That's why i specify migrated vm. As soon as vm migrated i took snapshot and made disk conversion from sata/ide to scsi after installing windows virt io drivers.Could...