Latest activity
-
Wwarlocksyno replied to the thread TrueNAS Storage Plugin.It should be 1.2.2 I don't mess with cloudinit VMs very often, but I think that's more to do with the cloudinit being an ISO that is booted? Since this is block storage, ISOs can't be stored on it. Can the cloudinit drives be stored on a...
-
Jjadtemp12 replied to the thread Ping spikes on virtual machine.close to 2 yrs and still no solution? Is this a homelab or enterprise? Check your firewall rules also, is the IP that's pinging local on the same network?
-
Jjdancer replied to the thread Esxi migration to proxmox.While it's true 3-nodes is the minimum for a Ceph cluster, you can only lose 1 node before losing quorum. You'll really want 5-nodes. Ceph is a scale-out solution. More nodes/OSDs = more IOPS. Can lose 2 nodes and still have quorum. While...
-
Uuzumo replied to the thread 8700G iGPU 780m passthrough.Hold on a second. Could you at least give me the settings? I'm struggling at 780m... Please give me the results of the following command: cat /etc/kernel/cmdline cat /etc/default/grub cat /etc/modules cat /etc/modprobe.d/* cat...
-
CChinoeAsian posted the thread Stuck on boot with intel N150 iGPU Passthrough in Proxmox VE: Installation and configuration.Hi all, The last few days I've been trying to passthrough the iGPU of my intel N150 mini pc (gmktec g3 plus) to my ubuntu vm on proxmox for hardware acceleration in jellyfin. However, after following all the steps, the vm keeps getting stuck...
-
-
Mmrmrv replied to the thread 8700G iGPU 780m passthrough.Finally success here as well.. I messed up and needed to do a full reset of the bios. With the recovery of the standard values and once more entering the few options it started working. Don't know what bios setting blocked the working, but it...
-
Dder_dom replied to the thread Container öffentliche IPv6 zuweisen.Jap, kann sicher nicht schaden :) Letztendlich also kein config Fehler in Proxmox, sondern ein nicht wirklich passendes inklusiv Subnetz für virtualisierte Umgebungen.
-
LHi, Thank you for your help. I'm not using API very often so i didn't think of it. I was able to create account very easyly with curl -H 'Authorization: PDMAPIToken TOKENID:TOKENKEY' -d 'contact=' -d 'directory=' -d 'name='...
-
JJohannes S replied to the thread Migration possible from PVE 7.4 to latest PVE 8?.No, as written by Thomas Lamprecht on the first post of this thread: You could try the pct remote-migrate or qm remote-migrate cli tools but I'm not sure whether they were already available for PVE7 and whether a migration from PVE7 to PVE8...
-
Dder_dom replied to the thread Container öffentliche IPv6 zuweisen.Problem gelöst, es liegt am inklusiv /64er Netz von Netcup. Ich zitiere mal aus deren Forum, ich war wohl nicht der erste: "Wie in deinem Artikel ja auch steht, nutzt Netcup kein geroutetes Subnetz, sondern ein geswitchtes. D.h., du musst der...
-
MMihai replied to the thread [SOLVED] Proxmox VMs Stuck in Migration Loop after Upgrade - Host Cannot Reboot.I solved my issue my going into each VM on that host and shutting them down manually.
-
Ddelorean_dude replied to the thread Container issue.So I ran the new instance again and added an image, i then navigated to where the image is stored (tags.jpg) This is the permissions on the file. Does that help any?
-
-
Nnerdoc reacted to Impact's post in the thread Fehler mit Docker Container nach Linux update with
Like.
https://forum.proxmox.com/threads/docker-inside-lxc-net-ipv4-ip_unprivileged_port_start-error.175437/ -
Ddelorean_dude replied to the thread Container issue.Hi again, No luck. Doesnt appear to be a way to set permissions in the UI, well there is but it has no effect. Its me and other uses can be set to read or full access. Looked at the folder permissions and found the following.. set as it was...
-
-
MMihai posted the thread [SOLVED] Proxmox VMs Stuck in Migration Loop after Upgrade - Host Cannot Reboot in Proxmox VE: Installation and configuration.I am upgrading from 9.0 to 9.1 and I completed upgrading the first host out of my 3-node cluster. When I gave the host a reboot command, it started attempting to migrate the VMs, but it ran into this issue with every VM on that host: task...
-
robm posted the thread Migration possible from PVE 7.4 to latest PVE 8? in Datacenter Manager: Installation and configuration.Testing out the new (and awesome) PDM. I was able to add two clusters, one which has PVE 7 servers, and one that has PVE 8 servers. Is it possible to live migrate VMs from the PVE 7 cluster to the PVE 8 cluster? Would help us perform upgrades and... -
FFirstSoul posted the thread Backup extrem langsam nach unbestimmter Zeit - Einbruch Transfer in Proxmox Backup Server (Deutsch/German).Moin, ich bin langsam verzweifelt und komme nicht weiter. Ich habe meine NAS (TrueNAS VM) auf eine OMV VM umgestellt. Dann habe ich in dem Zuge meine TrueNAS Bare-Metal Maschine mit einer PBS VM durch einen PBS Bare-Metal ersetzt. Jetzt...
-
-
FFaco posted the thread Renseignements ssh shell ou console in Proxmox VE: Installation and configuration.Bonjour existe t'il un moyen d'avoir le même écran de console que celle pour ce connecter à Proxmox quand on ce connecte à une VM . Je trouve bien plus propre la connexion à l'hôte ( cela ressemble à une connexion ssh plein écran ) alors que...
-
JJohannes S replied to the thread PBS on desktop pc with SSD or in VM on PVE or not at all?.Good question, indeed ssh is needed for communication and migration between cluster nodes (according to https://pve.proxmox.com/wiki/Cluster_Manager#_role_of_ssh_in_proxmox_ve_clusters ) but the documentation says nothing about qdevice. The...
-
Llumarel reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments...
