Latest activity
-
Rrjcab replied to the thread CTX with no particular conf and USB.Thanks for your time. In my case only the serial will make the difference: root@pve:/mnt# udevadm info --name=/dev/bus/usb/001/049 --attribute-walk Udevadm info starts with the device specified by the devpath and then walks up the chain of...
-
Sshgmongo posted the thread Netzwerk Probleme: Ist es die Fritzbox oder Proxmox in Proxmox VE (Deutsch/German).Hallo, ich betreibe an meinem LAN2 Port einen NUC mit Proxmox drauf. Auf dem Proxmox laufen mehrere Container. Die Container haben alle eine feste MAC Adresse von mir bekommen und auf der Fritzbox habe ich die IP Adressen jedem Container...
-
-
Ii8degrees replied to the thread Custom Machine Types.So happy to finally see somebody chime in on this thread! :-) From what I have gathered from grepping through the Perl sources and all, I cannot but agree with you whole hardheartedly; it appears to be in dire need of reconsideration by...
-
OOnslow replied to the thread Proxmox v8.4.14 | Error.Possibly an IP address conflict. So I would start from checking IP addresses and routing.
-
Ppingoop reacted to rcd's post in the thread Qemu Guest Agent is not running - VM 100 qmp command 'guest-ping' failed - got timeout with
Like.
Uhm, ok. How do you "fix" a VM agent? It's installed ("yum install qemu-guest-agent") and reports that it was called. The caller didn't get the message though. # systemctl status qemu-guest-agent.service ● qemu-guest-agent.service - QEMU Guest... -
Jjuju94 replied to the thread Proxmox crashed.It seems I already have microcode : microcode : 0xa705206
-
Aangdigi posted the thread TASK ERROR: Invalid argument (os error 22) in Proxmox Backup: Installation and configuration.Hello, I'm getting this error when trying to create a new datastore. I have a remote cifs share and here is my fstab Here is an output of permissions for the dir showing the backup user I've also attached an output of the datastore...
-
Rrmacs posted the thread NGINX Änderung für neues Mobile Karantäne Interface in Proxmox VE (Deutsch/German).Hallo Weiss jemand von euch, um was man die Konfig beim NGINX ergänzen muss, dass das neue Karantäne Interface für Mobiles funktioniert? Folgender Eintrag steht im WIKI: location /quarantine { proxy_pass https://localhost:8006...
-
AAndreasS reacted to bbgeek17's post in the thread iSCSI where to put ISOs or Import-Images? with Like.
The placement of ISO, or any other files, i.e. QCOW cloud images, requires File Storage. It can be an NFS, CIFS, or an OCFS2 managed LUN. You can't place files on raw storage directly. Blockbridge : Ultra low latency all-NVME shared storage...
-
DDomino replied to the thread Proxmox Devs: Please could you modernize the arcane forced default USB controllers logic??.Optimism is great, but the aforementioned dungeon really does exist!!! :oops: Formal request raised: https://bugzilla.proxmox.com/show_bug.cgi?id=6909
-
shanreich reacted to kalle3's post in the thread Network repair with ifreload -a after reboot with Like.
You're right, if I set up the management interface with the gateway as vmbr1.6 it works even without the ifreload via systemd after reboot, because the default gateway is created immediately. I made two mistakes: a) I used 'systemctl restart... -
Kkalle3 replied to the thread Network repair with ifreload -a after reboot.You're right, if I set up the management interface with the gateway as vmbr1.6 it works even without the ifreload via systemd after reboot, because the default gateway is created immediately. I made two mistakes: a) I used 'systemctl restart...
-
Kkobold81 replied to the thread Passthrough:.I known the repo, but Passthrough works currently perfectly with ubuntu and batocera but on Windows I had to pass c7:00.5 and c7:00.6 before reinstalling the Server. Now, they Need more iommu groups. I will try some alternative ideas, perhaps one...
-
Rroggeb reacted to johnblue's post in the thread CPU type `host` is significantly SLOWER than `x86-64-v2-AES` with Like.
This is one of those threads that I feel very fortunate it was at the top of the heap when I logged in. I have not yet created a Windows VM on my PVE server but it is on the todo list. There are 14 or so threads that are sticky there should be...
-
jsterr reacted to bbgeek17's post in the thread iSCSI where to put ISOs or Import-Images? with Like.
The placement of ISO, or any other files, i.e. QCOW cloud images, requires File Storage. It can be an NFS, CIFS, or an OCFS2 managed LUN. You can't place files on raw storage directly. Blockbridge : Ultra low latency all-NVME shared storage... -
Jjanus57 replied to the thread Proxmox Devs: Please could you modernize the arcane forced default USB controllers logic??.Hi, Well, it's not only for bugs, it's for feature requests as well, and therefore be tracked by the Proxmox team (which is not the case with the forum). As I can see feature requests are discussed on the bugzilla and if they are accepted by...
-
Ccrally replied to the thread Server Upgrade - Unterstützung/Beratung bei Auswahl der Hardware.ok... also die GPU ist drin und wird auch vom OS erkannt. Das pci Passthrough klappt noch nicht ganz, aber ich hab ein anderes Problem, welches ich zuerst lösen muss... Nach Einbau der GPU brauchte der Server 3-5 Anläufe um zu booten. Hatte in...
-
-
bbgeek17 replied to the thread shared storage with Dell MD3200i (iSCSI multipath) for VM and file server use with Live Migration.There are some drawbacks, i.e. instead of using block oriented Virtio architecture you are now relying on network Virtio. However, given that you were planning to pass-through the LUN (bypassing Virtio) - you probably will not see a difference... -
Rroggeb reacted to sbrocket's post in the thread The Reasons for poor performance of Windows when the CPU type is host with Like.
I have been in your shoes many times and understand that sentiment, but I think that statement was only minorly overblown. Nested virtualization with a Windows guest is not at all an exotic requirement since it’s required for WSL. I don’t have...
-
bbgeek17 replied to the thread iSCSI where to put ISOs or Import-Images?.The placement of ISO, or any other files, i.e. QCOW cloud images, requires File Storage. It can be an NFS, CIFS, or an OCFS2 managed LUN. You can't place files on raw storage directly. Blockbridge : Ultra low latency all-NVME shared storage...
