Hello,
I recently rebuilt my PVE machine (R720XD) so that the HBA is in IT mode and i now can use ZFS. When installing PVE i chose raid Z1 and selected all the drives. I have read several forums and am aware that using Z1 like this isn't recommended but it works for what I need. Performance isn't really a big factor. Having said that I am not against doing something else if someone insists. I have 8 1.2TB SAS drives installed. After loading the console up, it says that I only have 1.19TB available. What did I do when I setup the raid? Below are outputs of zpool list -v, Zpool status. I went to ZFS under disks in the UI and attempted to add ZFS thinking maybe I didn't set up all the drives, but no drives are available to set up. I dont know enough to really interpret what it means but I am trying to learn. TYIA
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
rpool 1.09T 1.53G 1.08T - - 0% 0% 1.00x ONLINE -
mirror-0 1.09T 1.53G 1.08T - - 0% 0.13% - ONLINE
scsi-35000c5008f69a99b-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008f4e0e77-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008f5f3f97-part3 1.09T - - - - - - - ONLINE
scsi-35000039ab8203549-part3 1.09T - - - - - - - ONLINE
scsi-35000039ab8202eb5-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008f5e91d7-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008e8e896b-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008e9c3e03-part3 1.09T - - - - - - - ONLINE
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
scsi-35000c5008f69a99b-part3 ONLINE 0 0 0
scsi-35000c5008f4e0e77-part3 ONLINE 0 0 0
scsi-35000c5008f5f3f97-part3 ONLINE 0 0 0
scsi-35000039ab8203549-part3 ONLINE 0 0 0
scsi-35000039ab8202eb5-part3 ONLINE 0 0 0
scsi-35000c5008f5e91d7-part3 ONLINE 0 0 0
scsi-35000c5008e8e896b-part3 ONLINE 0 0 0
scsi-35000c5008e9c3e03-part3 ONLINE 0 0 0
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
rpool 1.09T 1.53G 1.08T - - 0% 0% 1.00x ONLINE -
I recently rebuilt my PVE machine (R720XD) so that the HBA is in IT mode and i now can use ZFS. When installing PVE i chose raid Z1 and selected all the drives. I have read several forums and am aware that using Z1 like this isn't recommended but it works for what I need. Performance isn't really a big factor. Having said that I am not against doing something else if someone insists. I have 8 1.2TB SAS drives installed. After loading the console up, it says that I only have 1.19TB available. What did I do when I setup the raid? Below are outputs of zpool list -v, Zpool status. I went to ZFS under disks in the UI and attempted to add ZFS thinking maybe I didn't set up all the drives, but no drives are available to set up. I dont know enough to really interpret what it means but I am trying to learn. TYIA
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
rpool 1.09T 1.53G 1.08T - - 0% 0% 1.00x ONLINE -
mirror-0 1.09T 1.53G 1.08T - - 0% 0.13% - ONLINE
scsi-35000c5008f69a99b-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008f4e0e77-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008f5f3f97-part3 1.09T - - - - - - - ONLINE
scsi-35000039ab8203549-part3 1.09T - - - - - - - ONLINE
scsi-35000039ab8202eb5-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008f5e91d7-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008e8e896b-part3 1.09T - - - - - - - ONLINE
scsi-35000c5008e9c3e03-part3 1.09T - - - - - - - ONLINE
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
scsi-35000c5008f69a99b-part3 ONLINE 0 0 0
scsi-35000c5008f4e0e77-part3 ONLINE 0 0 0
scsi-35000c5008f5f3f97-part3 ONLINE 0 0 0
scsi-35000039ab8203549-part3 ONLINE 0 0 0
scsi-35000039ab8202eb5-part3 ONLINE 0 0 0
scsi-35000c5008f5e91d7-part3 ONLINE 0 0 0
scsi-35000c5008e8e896b-part3 ONLINE 0 0 0
scsi-35000c5008e9c3e03-part3 ONLINE 0 0 0
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
rpool 1.09T 1.53G 1.08T - - 0% 0% 1.00x ONLINE -
Last edited: