WOL ( Wake On Lan ) and Proxmox 5.3.5 Help ....

Fabio

Renowned Member
Jan 30, 2016
63
1
73
51
Good evening,
I have a dell t330 server with PROXMOX. In the BIOS I have enabled the WOL function on both network cards.
Upstream I have a firewall in which I enter the VPN. I wanted to use the Wake On Lan Magic packet utility to turn on proxmox when I need it.
it seems that the card is also enabled by proxmox, with the ethotool eno1 command
Settings for eno1:
Supported ports: [TP]
Supported link modes: 10baseT / Half 10baseT / Full
100baseT / Half 100baseT / Full
1000baseT / Half 1000baseT / Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT / Half 10baseT / Full
100baseT / Half 100baseT / Full
1000baseT / Half 1000baseT / Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT / Half 10baseT / Full
100baseT / Half 100baseT / Full
1000baseT / Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb / s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes

M, i don't know if i have to configure something else to activate this function?
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!