windows 7 on proxmox 3.1 problem

[vokals02]

fresh installed proxmox 3.1
IP - xxx.xxx.210.47
Subnet - 255.255.255.192
GW - xxx.xxx.210.2

Windows 7 installed under proxmox
IP - xxx.xxx.210.44
Subnet - 255.255.255.192
GW xxx.xxx.210.2

1. proxmox can ping its gateway (no problem)
2. proxmox cannot ping win7
3. win7 cannot ping its GW
4. on other PCs, I can ping proxmox but not win7

please help me with this

Thank you

 

[Nezdeshniy]

fresh installed proxmox 3.1
IP - xxx.xxx.210.47
Subnet - 255.255.255.192
GW - xxx.xxx.210.2

Windows 7 installed under proxmox
IP - xxx.xxx.210.44
Subnet - 255.255.255.192
GW xxx.xxx.210.2

1. proxmox can ping its gateway (no problem)
2. proxmox cannot ping win7
3. win7 cannot ping its GW
4. on other PCs, I can ping proxmox but not win7

please help me with this

Thank you

Check vm network - you need bridge with vmbr0 on your vm, also check firewall.

 

[vokals02]

Hi Nezdeshnly,

can you help me how to create bridge with vmbr0 on my vm? my firewall is already off.

Thank you

 

[Nezdeshniy]

Hi Nezdeshnly,

can you help me how to create bridge with vmbr0 on my vm? my firewall is already off.

Thank you

Turn off vm, go to vm settings - hardware, check network device, you need something like bridge=vmbr0, if not delete network device and then make new - add - network device - bridge with vmbr0. also check the name of the network card in node settings - network.

 

[vokals02]

Hi Nezdeshlyn,

I deleted my existing ethernet device. then add a new one > bridge=vmbr0; vlan tag=no VLAN; Model=intelE1000.

also, how do i check for the name of the network card in node settings?
on web config under hardware of my win7
Network Device(net0) e1000=macadd, bridge=vmbr0

on proxmox command line under /etc/network/interfaces
auto lo
iface lo inet loopback

auto vmbr0
iface vmbr0 inet static
address XXX.XXX.210.47
netmask 255.255.255.192
gateway XXX.XXX.210.2
bridge_ports eth0
bridge_stp off
bridge_fd 0


Thank you

 

[Nezdeshniy]

Sooo, it help ? Now you can see vm ? ping ect... ?

 

[vokals02]

Hi Nezdeshnyl,

no sir my problem still exist

after I created a new ethernet which is in bridge=vmbr0, you also told me to check for the name of the network card in node settings, how do I check for it? and what to check?

sorry im new with this
btw thank you so much

 

[vokals02]

still my VM cannot ping its GW

please help (

 

[vokals02]

please help