[SOLVED] WebUI Issues after Update to PVE-Manager 7.0-11

[DavidKahl]

Hi Community,

Hope all of you are well and healthy.

I've been struggling the last few days with what seems to be a bug or issue in the Web UI. The UI itself loads and the PVE-Manager is running, however when I navigate between containers or VM the screen is grey and I'm unable to see any of the config items that would be attributable to that container. When navigating back to the main device the UI seems broken and doesn't allow any further navigation. I've attached some screenshots but wondering if anyone else has seen these issues. The devices and containers are all up and running which is the good news, but I'm struggling to change anything else.

Help would be much appreciated

THX

David


Ahead of asking here is the the PVE Information:

proxmox-ve: 7.0-2 (running kernel: 5.11.22-3-pve)
pve-manager: 7.0-11 (running version: 7.0-11/63d82f4e)
pve-kernel-5.11: 7.0-6
pve-kernel-helper: 7.0-6
pve-kernel-5.4: 6.4-4
pve-kernel-5.11.22-3-pve: 5.11.22-6
pve-kernel-5.11.22-2-pve: 5.11.22-4
pve-kernel-5.4.124-1-pve: 5.4.124-1
pve-kernel-5.4.73-1-pve: 5.4.73-1
ceph: 15.2.13-pve1
ceph-fuse: 15.2.13-pve1
corosync: 3.1.2-pve2
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown: residual config
ifupdown2: 3.1.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-1
libknet1: 1.21-pve1
libproxmox-acme-perl: 1.2.0
libproxmox-backup-qemu0: 1.2.0-1
libpve-access-control: 7.0-4
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.0-5
libpve-guest-common-perl: 4.0-2
libpve-http-server-perl: 4.0-2
libpve-storage-perl: 7.0-10
libqb0: 1.0.5-1
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 4.0.9-4
lxcfs: 4.0.8-pve2
novnc-pve: 1.2.0-3
proxmox-backup-client: 2.0.8-1
proxmox-backup-file-restore: 2.0.8-1
proxmox-mini-journalreader: 1.2-1
proxmox-widget-toolkit: 3.3-6
pve-cluster: 7.0-3
pve-container: 4.0-9
pve-docs: 7.0-5
pve-edk2-firmware: 3.20200531-1
pve-firewall: 4.2-2
pve-firmware: 3.2-4
pve-ha-manager: 3.3-1
pve-i18n: 2.4-1
pve-qemu-kvm: 6.0.0-3
pve-xtermjs: 4.12.0-1
qemu-server: 7.0-13
smartmontools: 7.2-pve2
spiceterm: 3.2-2
vncterm: 1.7-1
zfsutils-linux: 2.0.5-pve1

 

[Moayad]

Did you upgrade the node from PVE 6.4.x? if so, try to clear the browser cash as written in our wiki guide [0]

If you install PVE 7 directly, try to see if the problem occurs in another browser as well, if yes - please check the (browser developer tools) for any error. also maybe you could try a private browser sometimes the issues could be from the browser plugin.

[0] https://pve.proxmox.com/wiki/Upgrade_from_6.x_to_7.0#Introduction

 

[DavidKahl]

Hi Moayad,

I was updating from PVE 7.0-9 to -11, and everthing had worked previously.

The Browser Cache didnt have any effect on the issue. When i enter the login details im now confronted with an empty blank screen, a refresh will load the PVE Manager but the above mentioned issue remain. This is accross 2 devices and replicable on both.

THX

 

[Moayad]

it works here, have you tried with a private/incognito browser?

 

[DavidKahl]

Unfortunately it had no effect.

After the Login screen blank - regardless of private or not and with and without emptied cache.

 

[DavidKahl]

Is there any way to reinstall the entire UI and its elements?

 

[Moayad]

on which browser and OS are you tried?

did you see any error in browser developer tools?

 

[DavidKahl]

Using Chrome:WIN10 and Safari MacOS 11. The elemnets dont load - when refreshed I saw that it noted "Failed to Load resources, the server responded with status 501(no such file "/Proxmox/panel/StatusView.js").

 

[Moayad]

Hmmm,

Please try to re-install the following packages:

apt install --reinstall pve-manager proxmox-widget-toolkit

Then clear your browser cache and reload the GUI.

Hopefully that helps

 

[DavidKahl]

HI Moayad,

Worked a Charm - thank you!

Best

David