web interface not working in Proxmox 3 on fresh installation

  • Thread starter Thread starter bentech4u
  • Start date Start date
B

bentech4u

Guest
HI

i have installed Proxmox 3 on Sun X4100 . installation went smoothly. and i got the login screen with IP with port.

After that i upgraded ( apt-get update && apt-get upgrade). restated also.

http://192.168.2.183:8006

but when i point the browser to this address, nothing is happening.


Code: 
root@proxmox:/# netstat -tunap | grep 8006
tcp        0      0 0.0.0.0:8006            0.0.0.0:*               LISTEN      2386/pveproxy



Code: 
root@proxmox:/# more /etc/network/interfaces
auto lo
iface lo inet loopback


auto vmbr0
iface vmbr0 inet static
        address 192.168.2.183
        netmask 255.255.255.0
        gateway 192.168.2.1
        bridge_ports eth0
        bridge_stp off
        bridge_fd 0



Code: 
root@proxmox:/# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:14:4f:01:55:28
          inet6 addr: fe80::214:4fff:fe01:5528/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:58742 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3837 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:17001161 (16.2 MiB)  TX bytes:297801 (290.8 KiB)


lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet6 addr: fe80::1/128 Scope:Link
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:3 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


vmbr0     Link encap:Ethernet  HWaddr 00:14:4f:01:55:28
          inet addr:192.168.2.183  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::214:4fff:fe01:5528/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:44403 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3779 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12551003 (11.9 MiB)  TX bytes:293949 (287.0 KiB)


how to fix this issue. is there any package need to install separately.?

please help me to fix this issue
 
You must log in or register to reply here.
Top Bottom
Back