VZDUMP error on NFS

N

naturlight

Member
Jan 2, 2011
65
0
6
Hello everybody,
I add a NFS and tried to do a snapshot but i get an error :
jan 23 16:55:02 INFO: Starting Backup of VM 102 (qemu)
jan 23 16:55:02 INFO: running
jan 23 16:55:02 INFO: status = running
jan 23 16:55:03 INFO: backup mode: snapshot
jan 23 16:55:03 INFO: ionice priority: 7
jan 23 16:55:03 INFO: Insufficient free extents (0) in volume group pve: 256 required
jan 23 16:55:03 ERROR: Backup of VM 102 failed - command 'lvcreate --size 1024M --snapshot --name 'xxxx.net-0' '/dev/pve/lv1'' failed with exit code 5
Click to expand...

I dont understand why
df -h
Sys. de fich. Tail. Occ. Disp. %Occ. Monté sur
/dev/md1 20G 961M 18G 6% /
tmpfs 7,9G 0 7,9G 0% /lib/init/rw
udev 10M 592K 9,5M 6% /dev
tmpfs 7,9G 0 7,9G 0% /dev/shm
/dev/mapper/pve-lv1 1,4T 108G 1,2T 9% /var/lib/vz
10.x.x.x:/nas-00/template
914G 16G 898G 2% /var/lib/vz/nas
10.x.x.x:/nas-00/template/
914G 16G 898G 2% /mnt/pve/bas
10.x.x.x:/nas-00/template/
914G 16G 898G 2% /mnt/pve/NAS
Click to expand...
 
I am having similar issue, here is my backup log:

HTML: 
104: Feb 09 11:41:03 INFO: Starting Backup of VM 104 (qemu)
104: Feb 09 11:41:03 INFO: running
104: Feb 09 11:41:03 INFO: status = running
104: Feb 09 11:41:03 INFO: backup mode: snapshot
104: Feb 09 11:41:03 INFO: ionice priority: 7
104: Feb 09 11:41:04 INFO:   Logical volume "vzsnap-vrtz1-0" created
104: Feb 09 11:41:04 INFO: creating archive '/YEDEKLER//vzdump-qemu-104-2011_02_09-11_41_03.tar'
104: Feb 09 11:41:05 INFO: adding '/YEDEKLER//vzdump-qemu-104-2011_02_09-11_41_03.tmp/qemu-server.conf' to archive ('qemu-server.conf')
104: Feb 09 11:41:05 INFO: adding '/mnt/vzsnap0/images/104/vm-104-disk-1.raw' to archive ('vm-disk-ide0.raw')
104: Feb 10 16:52:31 INFO: umount: /mnt/vzsnap0: device is busy
104: Feb 10 16:52:31 INFO: umount: /mnt/vzsnap0: device is busy
104: Feb 10 16:52:31 ERROR: command 'umount /mnt/vzsnap0' failed with exit code 1
104: Feb 10 16:52:31 INFO:   Can't remove open logical volume "vzsnap-vrtz1-0"
104: Feb 10 16:52:31 ERROR: command 'lvremove -f '/dev/pve/vzsnap-vrtz1-0'' failed with exit code 5
104: Feb 10 16:52:31 ERROR: Backup of VM 104 failed - interrupted by signal

I had to kill process as it does not finish in 6 hours. It just stucks so.


vgdisplay


Code: 
 --- Volume group ---
  VG Name               pve
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  1038
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                4
  Open LV               3
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               698.13 GB
  PE Size               4.00 MB
  Total PE              178722
  Alloc PE / Size       177955 / 695.14 GB
  Free  PE / Size       767 / 3.00 GB
  VG UUID               LwTJLh-m5Bv-6kSF-8u89-BdFl-x4e1-NXQJen
 
Last edited:
this is a different issue, pls open a new thread and provide all details about your config, backup target, Proxmox VE version.
 
You must log in or register to reply here.
Top Bottom