Nov 28 09:30:03 slave02 kernel: rtc0: alarms up to one year, 242 bytes nvram, hpet irqs
Nov 28 09:30:03 slave02 kernel: device-mapper: uevent: version 1.0.3
Nov 28 09:30:03 slave02 kernel: device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised:
dm-devel@redhat.com
Nov 28 09:30:03 slave02 kernel: cpuidle: using governor ladder
Nov 28 09:30:03 slave02 kernel: cpuidle: using governor menu
Nov 28 09:30:03 slave02 kernel: EFI Variables Facility v0.08 2004-May-17
Nov 28 09:30:03 slave02 kernel: usbcore: registered new interface driver hiddev
Nov 28 09:30:03 slave02 kernel: usbcore: registered new interface driver usbhid
Nov 28 09:30:03 slave02 kernel: usbhid: v2.6:USB HID core driver
Nov 28 09:30:03 slave02 kernel: TCP cubic registered
Nov 28 09:30:03 slave02 kernel: Initializing XFRM netlink socket
Nov 28 09:30:03 slave02 kernel: NET: Registered protocol family 17
Nov 28 09:30:03 slave02 kernel: Bridge firewalling registered
Nov 28 09:30:03 slave02 kernel: registered taskstats version 1
Nov 28 09:30:03 slave02 kernel: rtc_cmos 00:04: setting system clock to 2012-11-28 09:29:55 UTC (1354094995)
Nov 28 09:30:03 slave02 kernel: Initalizing network drop monitor service
Nov 28 09:30:03 slave02 kernel: Freeing unused kernel memory: 1324k freed
Nov 28 09:30:03 slave02 kernel: Write protecting the kernel read-only data: 10240k
Nov 28 09:30:03 slave02 kernel: Freeing unused kernel memory: 804k freed
Nov 28 09:30:03 slave02 kernel: Freeing unused kernel memory: 1680k freed
Nov 28 09:30:03 slave02 kernel: udev[151]: starting version 164
Nov 28 09:30:03 slave02 kernel: Adaptec aacraid driver 1.1-7[28000]-ms
Nov 28 09:30:03 slave02 kernel: aacraid 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Nov 28 09:30:03 slave02 kernel: aacraid 0000:04:00.0: setting latency timer to 64
Nov 28 09:30:03 slave02 kernel: bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.1 (Dec 18, 2011)
Nov 28 09:30:03 slave02 kernel: alloc irq_desc for 16 on node -1
Nov 28 09:30:03 slave02 kernel: alloc kstat_irqs on node -1
Nov 28 09:30:03 slave02 kernel: bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 28 09:30:03 slave02 kernel: bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw
Nov 28 09:30:03 slave02 kernel: IRQ 17/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
Nov 28 09:30:03 slave02 kernel: ata_piix 0000:00:1f.2: version 2.13
Nov 28 09:30:03 slave02 kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
Nov 28 09:30:03 slave02 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Nov 28 09:30:03 slave02 kernel: bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
Nov 28 09:30:03 slave02 kernel: bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ce000000, IRQ 16, node addr 00:21:5e:28:e1:c8
Nov 28 09:30:03 slave02 kernel: bnx2 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Nov 28 09:30:03 slave02 kernel: bnx2 0000:06:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.3.fw
Nov 28 09:30:03 slave02 kernel: bnx2 0000:06:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
Nov 28 09:30:03 slave02 kernel: bnx2 0000:06:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ca000000, IRQ 17, node addr 00:21:5e:28:e1:ca
Nov 28 09:30:03 slave02 kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Nov 28 09:30:03 slave02 kernel: scsi1 : ata_piix
Nov 28 09:30:03 slave02 kernel: scsi2 : ata_piix
Nov 28 09:30:03 slave02 kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x480 irq 14
Nov 28 09:30:03 slave02 kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x488 irq 15
Nov 28 09:30:03 slave02 kernel: AAC0: kernel 5.2-0[17005] Oct 5 2011
Nov 28 09:30:03 slave02 kernel: AAC0: monitor 5.2-0[17005]
Nov 28 09:30:03 slave02 kernel: AAC0: bios 5.2-0[17005]
Nov 28 09:30:03 slave02 kernel: AAC0: serial 1BCAD600
Nov 28 09:30:03 slave02 kernel: AAC0: 64bit support enabled.
Nov 28 09:30:03 slave02 kernel: AAC0: 64 Bit DAC enabled
Nov 28 09:30:03 slave02 kernel: scsi0 : ServeRAID
Nov 28 09:30:03 slave02 kernel: scsi 0:0:0:0: Direct-Access ServeRA Drive 1 V1.0 PQ: 0 ANSI: 2
Nov 28 09:30:03 slave02 kernel: scsi 0:1:0:0: Direct-Access IBM-ESXS VPBA073C3ETS11 N A496 PQ: 0 ANSI: 5
Nov 28 09:30:03 slave02 kernel: scsi 0:1:1:0: Direct-Access IBM-ESXS ST373455SS BA29 PQ: 0 ANSI: 5
Nov 28 09:30:03 slave02 kernel: scsi 0:1:2:0: Direct-Access IBM-ESXS ST373455SS BA29 PQ: 0 ANSI: 5
Nov 28 09:30:03 slave02 kernel: scsi 0:1:3:0: Direct-Access IBM-ESXS ST373455SS BA29 PQ: 0 ANSI: 5
Nov 28 09:30:03 slave02 kernel: scsi 0:3:0:0: Enclosure IBM-ESXS VSC7160 1.07 PQ: 0 ANSI: 3
Nov 28 09:30:03 slave02 kernel: ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, 1.00, max UDMA/33
Nov 28 09:30:03 slave02 kernel: ata2.00: configured for UDMA/33
Nov 28 09:30:03 slave02 kernel: scsi: waiting for bus probes to complete ...
Nov 28 09:30:03 slave02 kernel: usb 2-1: new full speed USB device number 2 using uhci_hcd
Nov 28 09:30:03 slave02 kernel: sd 0:0:0:0: [sda] 286310400 512-byte logical blocks: (146 GB/136 GiB)
Nov 28 09:30:03 slave02 kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 28 09:30:03 slave02 kernel: sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
Nov 28 09:30:03 slave02 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
Nov 28 09:30:03 slave02 kernel: sda: sda1 sda2
Nov 28 09:30:03 slave02 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Nov 28 09:30:03 slave02 kernel: scsi 2:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-T10N 1.00 PQ: 0 ANSI: 5
Nov 28 09:30:03 slave02 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Nov 28 09:30:03 slave02 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 28 09:30:03 slave02 kernel: sr 2:0:0:0: Attached scsi CD-ROM sr0
Nov 28 09:30:03 slave02 kernel: usb 2-1: New USB device found, idVendor=067b, idProduct=2303
Nov 28 09:30:03 slave02 kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 28 09:30:03 slave02 kernel: usb 2-1: Product: USB-Serial Controller
Nov 28 09:30:03 slave02 kernel: usb 2-1: Manufacturer: Prolific Technology Inc.
Nov 28 09:30:03 slave02 kernel: usb 2-1: configuration #1 chosen from 1 choice
Nov 28 09:30:03 slave02 kernel: Refined TSC clocksource calibration: 2493.749 MHz.
Nov 28 09:30:03 slave02 kernel: Switching to clocksource tsc
Nov 28 09:30:03 slave02 kernel: ses 0:3:0:0: Attached Enclosure device
Nov 28 09:30:03 slave02 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 28 09:30:03 slave02 kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0
Nov 28 09:30:03 slave02 kernel: scsi 0:1:1:0: Attached scsi generic sg2 type 0
Nov 28 09:30:03 slave02 kernel: scsi 0:1:2:0: Attached scsi generic sg3 type 0
Nov 28 09:30:03 slave02 kernel: scsi 0:1:3:0: Attached scsi generic sg4 type 0
Nov 28 09:30:03 slave02 kernel: ses 0:3:0:0: Attached scsi generic sg5 type 13
Nov 28 09:30:03 slave02 kernel: sr 2:0:0:0: Attached scsi generic sg6 type 5
Nov 28 09:30:03 slave02 kernel: usb 2-2: new full speed USB device number 3 using uhci_hcd
Nov 28 09:30:03 slave02 kernel: EXT3-fs: barriers disabled
Nov 28 09:30:03 slave02 kernel: kjournald starting. Commit interval 5 seconds
Nov 28 09:30:03 slave02 kernel: EXT3-fs (dm-0): mounted filesystem with ordered data mode
Nov 28 09:30:03 slave02 kernel: usb 2-2: New USB device found, idVendor=0403, idProduct=6001
Nov 28 09:30:03 slave02 kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 28 09:30:03 slave02 kernel: usb 2-2: Product: FT232R USB UART
Nov 28 09:30:03 slave02 kernel: usb 2-2: Manufacturer: FTDI
Nov 28 09:30:03 slave02 kernel: usb 2-2: SerialNumber: A700f2YI
Nov 28 09:30:03 slave02 kernel: usb 2-2: configuration #1 chosen from 1 choice
Nov 28 09:30:03 slave02 kernel: usb 4-1: new full speed USB device number 2 using uhci_hcd
Nov 28 09:30:03 slave02 kernel: usb 4-1: New USB device found, idVendor=04b3, idProduct=4001
Nov 28 09:30:03 slave02 kernel: usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 28 09:30:03 slave02 kernel: usb 4-1: Product: IBM RSA2
Nov 28 09:30:03 slave02 kernel: usb 4-1: Manufacturer: IBM
Nov 28 09:30:03 slave02 kernel: usb 4-1: SerialNumber: 00215e823b1e
Nov 28 09:30:03 slave02 kernel: usb 4-1: configuration #1 chosen from 1 choice
Nov 28 09:30:03 slave02 kernel: input: IBM IBM RSA2 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
Nov 28 09:30:03 slave02 kernel: generic-usb 0003:04B3:4001.0001: input,hidraw0: USB HID v1.10 Keyboard [IBM IBM RSA2] on usb-0000:00:1d.2-1/input0
Nov 28 09:30:03 slave02 kernel: input: IBM IBM RSA2 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input3
Nov 28 09:30:03 slave02 kernel: generic-usb 0003:04B3:4001.0002: input,hidraw1: USB HID v1.10 Mouse [IBM IBM RSA2] on usb-0000:00:1d.2-1/input1
Nov 28 09:30:03 slave02 kernel: generic-usb 0003:04B3:4001.0003: hiddev96,hidraw2: USB HID v1.10 Device [IBM IBM RSA2] on usb-0000:00:1d.2-1/input2
Nov 28 09:30:03 slave02 kernel: udev[448]: starting version 164
Nov 28 09:30:03 slave02 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 28 09:30:03 slave02 kernel: intel_rng: FWH not detected
Nov 28 09:30:03 slave02 kernel: dca service started, version 1.12.1
Nov 28 09:30:03 slave02 kernel: usbcore: registered new interface driver usbserial
Nov 28 09:30:03 slave02 kernel: USB Serial support registered for generic
Nov 28 09:30:03 slave02 kernel: usbcore: registered new interface driver usbserial_generic
Nov 28 09:30:03 slave02 kernel: usbserial: USB Serial Driver core
Nov 28 09:30:03 slave02 kernel: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
Nov 28 09:30:03 slave02 kernel: EDAC MC: Ver: 2.1.0 Nov 9 2012
Nov 28 09:30:03 slave02 kernel: ioatdma: Intel(R) QuickData Technology Driver 4.00
Nov 28 09:30:03 slave02 kernel: ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 28 09:30:03 slave02 kernel: ioatdma 0000:00:08.0: setting latency timer to 64
Nov 28 09:30:03 slave02 kernel: alloc irq_desc for 26 on node -1
Nov 28 09:30:03 slave02 kernel: alloc kstat_irqs on node -1
Nov 28 09:30:03 slave02 kernel: ioatdma 0000:00:08.0: irq 26 for MSI/MSI-X
Nov 28 09:30:03 slave02 kernel: ics932s401 0-0069: ics932s401 chip found
Nov 28 09:30:03 slave02 kernel: [drm] Initialized drm 1.1.0 20060810
Nov 28 09:30:03 slave02 kernel: USB Serial support registered for pl2303
Nov 28 09:30:03 slave02 kernel: pl2303 2-1:1.0: pl2303 converter detected
Nov 28 09:30:03 slave02 kernel: USB Serial support registered for FTDI USB Serial Device
Nov 28 09:30:03 slave02 kernel: ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
Nov 28 09:30:03 slave02 kernel: usb 2-2: Detected FT232RL
Nov 28 09:30:03 slave02 kernel: usb 2-2: Number of endpoints 2
Nov 28 09:30:03 slave02 kernel: usb 2-2: Endpoint 1 MaxPacketSize 64
Nov 28 09:30:03 slave02 kernel: usb 2-2: Endpoint 2 MaxPacketSize 64
Nov 28 09:30:03 slave02 kernel: usb 2-2: Setting MaxPacketSize 64
Nov 28 09:30:03 slave02 kernel: usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0
Nov 28 09:30:03 slave02 kernel: usbcore: registered new interface driver ftdi_sio
Nov 28 09:30:03 slave02 kernel: ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
Nov 28 09:30:03 slave02 kernel: usb 2-1: pl2303 converter now attached to ttyUSB1
Nov 28 09:30:03 slave02 kernel: usbcore: registered new interface driver pl2303
Nov 28 09:30:03 slave02 kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
Nov 28 09:30:03 slave02 kernel: ipmi message handler version 39.2
Nov 28 09:30:03 slave02 kernel: EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
Nov 28 09:30:03 slave02 kernel: EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
Nov 28 09:30:03 slave02 kernel: input: PC Speaker as /devices/platform/pcspkr/input/input4
Nov 28 09:30:03 slave02 kernel: [drm] radeon defaulting to kernel modesetting.
Nov 28 09:30:03 slave02 kernel: [drm] radeon kernel modesetting enabled.
Nov 28 09:30:03 slave02 kernel: radeon 0000:01:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov 28 09:30:03 slave02 kernel: [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1014:0x0305).
Nov 28 09:30:03 slave02 kernel: [drm] register mmio base: 0xDFFF0000
Nov 28 09:30:03 slave02 kernel: [drm] register mmio size: 65536
Nov 28 09:30:03 slave02 kernel: radeon 0000:01:06.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
Nov 28 09:30:03 slave02 kernel: radeon 0000:01:06.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
Nov 28 09:30:03 slave02 kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Nov 28 09:30:03 slave02 kernel: [drm] Driver supports precise vblank timestamp query.
Nov 28 09:30:03 slave02 kernel: [drm] radeon: irq initialized.
Nov 28 09:30:03 slave02 kernel: [drm] Detected VRAM RAM=128M, BAR=128M
Nov 28 09:30:03 slave02 kernel: [drm] RAM width 16bits DDR
Nov 28 09:30:03 slave02 kernel: [TTM] Zone kernel: Available graphics memory: 6150480 kiB.
Nov 28 09:30:03 slave02 kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
Nov 28 09:30:03 slave02 kernel: [TTM] Initializing pool allocator.
Nov 28 09:30:03 slave02 kernel: [TTM] Initializing DMA pool allocator.
Nov 28 09:30:03 slave02 kernel: [drm] radeon: 16M of VRAM memory ready
Nov 28 09:30:03 slave02 kernel: [drm] radeon: 512M of GTT memory ready.
Nov 28 09:30:03 slave02 kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
Nov 28 09:30:03 slave02 kernel: [drm] radeon: ib pool ready.
Nov 28 09:30:03 slave02 kernel: [drm] PCIE GART of 512M enabled (table at 0x0000000037880000).
Nov 28 09:30:03 slave02 kernel: radeon 0000:01:06.0: WB disabled
Nov 28 09:30:03 slave02 kernel: [drm] fence driver on ring 0 use gpu addr 0xb0000000 and cpu addr 0xffff880037856000
Nov 28 09:30:03 slave02 kernel: [drm] Loading R100 Microcode
Nov 28 09:30:03 slave02 kernel: platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
Nov 28 09:30:03 slave02 kernel: [drm] radeon: ring at 0x00000000B0001000
Nov 28 09:30:03 slave02 kernel: [drm] ring test succeeded in 1 usecs
Nov 28 09:30:03 slave02 kernel: [drm] ib test succeeded in 0 usecs
Nov 28 09:30:03 slave02 kernel: [drm] No valid Ext TMDS info found in BIOS
Nov 28 09:30:03 slave02 kernel: [drm] Radeon Display Connectors
Nov 28 09:30:03 slave02 kernel: [drm] Connector 0:
Nov 28 09:30:03 slave02 kernel: [drm] VGA
Nov 28 09:30:03 slave02 kernel: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
Nov 28 09:30:03 slave02 kernel: [drm] Encoders:
Nov 28 09:30:03 slave02 kernel: [drm] CRT1: INTERNAL_DAC1
Nov 28 09:30:03 slave02 kernel: [drm] Connector 1:
Nov 28 09:30:03 slave02 kernel: [drm] DVI-D
Nov 28 09:30:03 slave02 kernel: [drm] HPD2
Nov 28 09:30:03 slave02 kernel: [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
Nov 28 09:30:03 slave02 kernel: [drm] Encoders:
Nov 28 09:30:03 slave02 kernel: [drm] DFP2: INTERNAL_DVO1
Nov 28 09:30:03 slave02 kernel: [drm] fb mappable at 0xD0040000
Nov 28 09:30:03 slave02 kernel: [drm] vram apper at 0xD0000000
Nov 28 09:30:03 slave02 kernel: [drm] size 786432
Nov 28 09:30:03 slave02 kernel: [drm] fb depth is 8
Nov 28 09:30:03 slave02 kernel: [drm] pitch is 1024
Nov 28 09:30:03 slave02 kernel: fbcon: radeondrmfb (fb0) is primary device
Nov 28 09:30:03 slave02 kernel: Console: switching to colour frame buffer device 128x48
Nov 28 09:30:03 slave02 kernel: fb0: radeondrmfb frame buffer device
Nov 28 09:30:03 slave02 kernel: drm: registered panic notifier
Nov 28 09:30:03 slave02 kernel: Slow work thread pool: Starting up
Nov 28 09:30:03 slave02 kernel: Slow work thread pool: Ready
Nov 28 09:30:03 slave02 kernel: [drm] Initialized radeon 2.13.0 20080528 for 0000:01:06.0 on minor 0
Nov 28 09:30:03 slave02 kernel: EXT3-fs (dm-0): using internal journal
Nov 28 09:30:03 slave02 kernel: Adding 11534328k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:11534328k
Nov 28 09:30:03 slave02 kernel: EXT3-fs: barriers disabled
Nov 28 09:30:03 slave02 kernel: kjournald starting. Commit interval 5 seconds
Nov 28 09:30:03 slave02 kernel: EXT3-fs (dm-2): using internal journal
Nov 28 09:30:03 slave02 kernel: EXT3-fs (dm-2): mounted filesystem with ordered data mode
Nov 28 09:30:03 slave02 kernel: EXT3-fs: barriers disabled
Nov 28 09:30:03 slave02 kernel: kjournald starting. Commit interval 5 seconds
Nov 28 09:30:03 slave02 kernel: EXT3-fs (sda1): using internal journal
Nov 28 09:30:03 slave02 kernel: EXT3-fs (sda1): mounted filesystem with ordered data mode
Nov 28 09:30:03 slave02 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Nov 28 09:30:03 slave02 kernel: All bugs added by David S. Miller <davem@redhat.com>
Nov 28 09:30:03 slave02 kernel: NET: Registered protocol family 10
Nov 28 09:30:03 slave02 kernel: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
Nov 28 09:30:03 slave02 kernel: bonding: bond0: setting mode to 802.3ad (4).
Nov 28 09:30:03 slave02 kernel: bonding: bond0: Setting MII monitoring interval to 100.
Nov 28 09:30:03 slave02 kernel: bonding: bond0: doing slave updates when interface is down.
Nov 28 09:30:03 slave02 kernel: bonding: bond0: Adding slave eth0.
Nov 28 09:30:03 slave02 kernel: bonding bond0: master_dev is not up in bond_enslave
Nov 28 09:30:03 slave02 kernel: alloc irq_desc for 27 on node -1
Nov 28 09:30:03 slave02 kernel: alloc kstat_irqs on node -1
Nov 28 09:30:03 slave02 kernel: bnx2 0000:03:00.0: irq 27 for MSI/MSI-X
Nov 28 09:30:03 slave02 kernel: bnx2 0000:03:00.0: eth0: using MSI
Nov 28 09:30:03 slave02 kernel: bonding: bond0: enslaving eth0 as a backup interface with a down link.
Nov 28 09:30:03 slave02 kernel: bonding: bond0: doing slave updates when interface is down.
Nov 28 09:30:03 slave02 kernel: bonding: bond0: Adding slave eth1.
Nov 28 09:30:03 slave02 kernel: bonding bond0: master_dev is not up in bond_enslave
Nov 28 09:30:03 slave02 kernel: alloc irq_desc for 28 on node -1
Nov 28 09:30:03 slave02 kernel: alloc kstat_irqs on node -1
Nov 28 09:30:03 slave02 kernel: bnx2 0000:06:00.0: irq 28 for MSI/MSI-X
Nov 28 09:30:03 slave02 kernel: bnx2 0000:06:00.0: eth1: using MSI
Nov 28 09:30:03 slave02 kernel: bonding: bond0: enslaving eth1 as a backup interface with a down link.
Nov 28 09:30:03 slave02 kernel: device bond0 entered promiscuous mode
Nov 28 09:30:03 slave02 kernel: device eth0 entered promiscuous mode
Nov 28 09:30:03 slave02 kernel: device eth1 entered promiscuous mode
Nov 28 09:30:03 slave02 kernel: 8021q: adding VLAN 0 to HW filter on device bond0
Nov 28 09:30:03 slave02 kernel: ADDRCONF(NETDEV_UP): bond0: link is not ready
Nov 28 09:30:03 slave02 kernel: fuse init (API version 7.13)
Nov 28 09:30:03 slave02 kernel: Loading iSCSI transport class v2.0-870.
Nov 28 09:30:03 slave02 kernel: iscsi: registered transport (tcp)
Nov 28 09:30:03 slave02 kernel: iscsi: registered transport (iser)
Nov 28 09:30:03 slave02 kernel: bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
Nov 28 09:30:03 slave02 kernel: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex.
Nov 28 09:30:03 slave02 kernel: vmbr0: port 1(bond0) entering forwarding state
Nov 28 09:30:03 slave02 kernel: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
Nov 28 09:30:03 slave02 kernel: bnx2 0000:06:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
Nov 28 09:30:03 slave02 kernel: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
Nov 28 09:30:03 slave02 ntpd[1360]: ntpd 4.2.6p2@1.2194-o Sun Oct 17 13:35:13 UTC 2010 (1)
Nov 28 09:30:03 slave02 ntpd[1390]: proto: precision = 0.147 usec
Nov 28 09:30:03 slave02 ntpd[1390]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Nov 28 09:30:03 slave02 ntpd[1390]: Listen and drop on 1 v6wildcard :: UDP 123
Nov 28 09:30:03 slave02 ntpd[1390]: Listen normally on 2 lo 127.0.0.1 UDP 123
Nov 28 09:30:03 slave02 ntpd[1390]: Listen normally on 3 vmbr0 192.168.0.13 UDP 123
Nov 28 09:30:03 slave02 ntpd[1390]: Listen normally on 4 lo ::1 UDP 123
Nov 28 09:30:03 slave02 ntpd[1390]: bind(21) AF_INET6 fe80::221:5eff:fe28:e1c8%4#123 flags 0x11 failed: Cannot assign requested address
Nov 28 09:30:03 slave02 ntpd[1390]: unable to create socket on bond0 (5) for fe80::221:5eff:fe28:e1c8#123
Nov 28 09:30:03 slave02 ntpd[1390]: failed to init interface for address fe80::221:5eff:fe28:e1c8
Nov 28 09:30:03 slave02 ntpd[1390]: Listen normally on 6 vmbr0 fe80::221:5eff:fe28:e1c8 UDP 123
Nov 28 09:30:04 slave02 rrdcached[1434]: starting up
Nov 28 09:30:04 slave02 rrdcached[1434]: checking for journal files
Nov 28 09:30:04 slave02 rrdcached[1434]: started new journal /var/lib/rrdcached/journal//rrd.journal.1354095004.036715
Nov 28 09:30:04 slave02 rrdcached[1434]: journal processing complete
Nov 28 09:30:04 slave02 rrdcached[1434]: listening for connections
Nov 28 09:30:04 slave02 pmxcfs[1449]: [quorum] crit: quorum_initialize failed: 6
Nov 28 09:30:04 slave02 pmxcfs[1449]: [quorum] crit: can't initialize service
Nov 28 09:30:04 slave02 pmxcfs[1449]: [confdb] crit: confdb_initialize failed: 6
Nov 28 09:30:04 slave02 pmxcfs[1449]: [quorum] crit: can't initialize service
Nov 28 09:30:04 slave02 pmxcfs[1449]: [dcdb] crit: cpg_initialize failed: 6
Nov 28 09:30:04 slave02 pmxcfs[1449]: [quorum] crit: can't initialize service
Nov 28 09:30:04 slave02 pmxcfs[1449]: [dcdb] crit: cpg_initialize failed: 6
Nov 28 09:30:04 slave02 pmxcfs[1449]: [quorum] crit: can't initialize service
Nov 28 09:30:04 slave02 iscsid: transport class version 2.0-870. iscsid version 2.0-871
Nov 28 09:30:04 slave02 iscsid: iSCSI daemon with pid=1212 started!
Nov 28 09:30:04 slave02 postfix/master[1455]: daemon started -- version 2.7.1, configuration /etc/postfix
Nov 28 09:30:05 slave02 /usr/sbin/cron[1492]: (CRON) INFO (pidfile fd = 3)
Nov 28 09:30:05 slave02 /usr/sbin/cron[1499]: (CRON) STARTUP (fork ok)
Nov 28 09:30:05 slave02 /usr/sbin/cron[1499]: (CRON) INFO (Running @reboot jobs)
Nov 28 09:30:05 slave02 kernel: DLM (built Nov 9 2012 11:32:45) installed
Nov 28 09:30:06 slave02 corosync[1571]: [MAIN ] Corosync Cluster Engine ('1.4.4'): started and ready to provide service.
Nov 28 09:30:06 slave02 corosync[1571]: [MAIN ] Corosync built-in features: nss
Nov 28 09:30:06 slave02 corosync[1571]: [MAIN ] Successfully read config from /etc/cluster/cluster.conf
Nov 28 09:30:06 slave02 corosync[1571]: [MAIN ] Successfully parsed cman config
Nov 28 09:30:06 slave02 corosync[1571]: [MAIN ] Successfully configured openais services to load
Nov 28 09:30:06 slave02 corosync[1571]: [TOTEM ] Initializing transport (UDP/IP Multicast).
Nov 28 09:30:06 slave02 corosync[1571]: [TOTEM ] Initializing transmit/receive security: libtomcrypt SOBER128/SHA1HMAC (mode 0).
Nov 28 09:30:06 slave02 corosync[1571]: [TOTEM ] The network interface [192.168.0.13] is now up.
Nov 28 09:30:06 slave02 corosync[1571]: [QUORUM] Using quorum provider quorum_cman
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync cluster quorum service v0.1
Nov 28 09:30:06 slave02 corosync[1571]: [CMAN ] CMAN 1352871249 (built Nov 14 2012 06:34:12) started
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync CMAN membership service 2.90
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: openais cluster membership service B.01.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: openais event service B.01.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: openais checkpoint service B.01.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: openais message service B.03.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: openais distributed locking service B.03.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: openais timer service A.01.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync extended virtual synchrony service
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync configuration service
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync cluster closed process group service v1.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync cluster config database access v1.01
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync profile loading service
Nov 28 09:30:06 slave02 corosync[1571]: [QUORUM] Using quorum provider quorum_cman
Nov 28 09:30:06 slave02 corosync[1571]: [SERV ] Service engine loaded: corosync cluster quorum service v0.1
Nov 28 09:30:06 slave02 corosync[1571]: [MAIN ] Compatibility mode set to whitetank. Using V1 and V2 of the synchronization engine.
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] CLM CONFIGURATION CHANGE
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] New Configuration:
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] Members Left:
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] Members Joined:
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] CLM CONFIGURATION CHANGE
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] New Configuration:
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] #011r(0) ip(192.168.0.13)
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] Members Left:
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] Members Joined:
Nov 28 09:30:06 slave02 corosync[1571]: [CLM ] #011r(0) ip(192.168.0.13)
Nov 28 09:30:06 slave02 corosync[1571]: [TOTEM ] A processor joined or left the membership and a new membership was formed.
Nov 28 09:30:06 slave02 corosync[1571]: [QUORUM] Members[1]: 3
Nov 28 09:30:06 slave02 corosync[1571]: [QUORUM] Members[1]: 3
Nov 28 09:30:06 slave02 corosync[1571]: [CPG ] chosen downlist: sender r(0) ip(192.168.0.13) ; members(old:0 left:0)
Nov 28 09:30:06 slave02 corosync[1571]: [MAIN ] Completed service synchronization, ready to provide service.
Nov 28 09:30:10 slave02 pmxcfs[1449]: [status] notice: update cluster info (cluster name bpscluster, version = 3)
Nov 28 09:30:10 slave02 pmxcfs[1449]: [dcdb] notice: members: 3/1449
Nov 28 09:30:10 slave02 pmxcfs[1449]: [dcdb] notice: all data is up to date
Nov 28 09:30:10 slave02 pmxcfs[1449]: [dcdb] notice: members: 3/1449
Nov 28 09:30:10 slave02 pmxcfs[1449]: [dcdb] notice: all data is up to date
Nov 28 09:30:10 slave02 kernel: vmbr0: no IPv6 routers present
Nov 28 09:30:14 slave02 kernel: bond0: no IPv6 routers present
Nov 28 09:30:23 slave02 ntpd[1390]: Deferring DNS for 0.debian.pool.ntp.org 1