virtualbox install guide fail - can't access web gui

[vv111y]

Using this guide https://pve.proxmox.com/wiki/Proxmox_VE_inside_VirtualBox for proxmox 4.4

No access to web gui,

I can ping the proxmox VM when I adjusted the network adapter IP via host OS (windows 7), to make it same as proxmox own IP

I cannot ping out.
I disabled windows firewall. no effect.
I tried different network adapter settings. no effect.

I can't find more info. help please, thanks.

 

[vv111y]

With bridged adapter setting I can ping from proxmox VM to windows7 host, and vice-versa. No web gui

 

[totalimpact]

You may have the wrong url. The page should be at https://ipaddress:8006

Other than that... need more info, are you running 4.4 stable? if you are running one of the betas, you might need to setup the testing repository and run updates to patch a potential bug.

On the pinging, yes most likely you would be best served with bridge networking on vb.

 

[vv111y]

yes, stable. IP address is confirmed. fwiw:

/etc/network/interfaces

iface lo inet loopback

auto vmbr0
iface vmbr0 inet static
address 192.168.0.64
netmask 255.255.255.0
gateway 192.168.0.1
bridge_ports eth0
bridge_stp off
bridge_fd 0

 

[totalimpact]

verify web server is listening:

 apt install net-tools
netstat -al | grep 8006

Should give you results like this:

tcp        0      0 0.0.0.0:8006            0.0.0.0:*               LISTEN

You might try restarting webserver: service pveproxy restart

And either you made a typo, or you are missing a section for eth0 in your config, see here:
https://pve.proxmox.com/wiki/Network_Configuration#_default_configuration_using_a_bridge

 

[vv111y]

????
Works on my mac, which is not the host.

I'll try what you suggest later ... have an errand to run...