debug: args = Namespace(CLASS=None, all=False, debug=True, excludepats=None, force=False, iflist=['vmbr1'], interfacesfile=None, interfacesfileformat='native', nldebug=False, noact=False, noaddons=False, nocache=False, perfmode=False, printdependency=None, quiet=False, skipupperifaces=False, syntaxcheck=False, syslog=False, type=None, verbose=False, version=None, withdepends=False)
debug: creating ifupdown object ..
info: requesting link dump
info: requesting address dump
info: requesting netconf dump
debug: nlcache: reset errorq
debug: {'use_daemon': 'no', 'template_enable': '1', 'template_engine': 'mako', 'template_lookuppath': '/etc/network/ifupdown2/templates', 'default_interfaces_configfile': '/etc/network/interfaces', 'disable_cli_interfacesfile': '0', 'addon_syntax_check': '0', 'addon_scripts_support': '1', 'addon_python_modules_support': '1', 'multiple_vlan_aware_bridge_support': '1', 'ifquery_check_success_str': 'pass', 'ifquery_check_error_str': 'fail', 'ifquery_check_unknown_str': '', 'ifquery_ifacename_expand_range': '0', 'link_master_slave': '0', 'delay_admin_state_change': '0', 'ifreload_down_changed': '0', 'addr_config_squash': '0', 'ifaceobj_squash': '0', 'adjust_logical_dev_mtu': '1', 'state_dir': '/run/network/'}
info: loading builtin modules from ['/usr/share/ifupdown2/addons']
info: module openvswitch not loaded (module init failed: no /usr/bin/ovs-vsctl found)
info: module openvswitch_port not loaded (module init failed: no /usr/bin/ovs-vsctl found)
info: module ppp not loaded (module init failed: no /usr/bin/pon found)
info: module batman_adv not loaded (module init failed: no /usr/sbin/batctl found)
debug: bridge: using reserved vlan range (0, 0)
debug: bridge: init: warn_on_untagged_bridge_absence=False
debug: bridge: init: vxlan_bridge_default_igmp_snooping=None
debug: bridge: init: arp_nd_suppress_only_on_vxlan=False
info: executing /sbin/sysctl net.bridge.bridge-allow-multiple-vlans
debug: bridge: init: multiple vlans allowed True
info: module mstpctl not loaded (module init failed: no /sbin/mstpctl found)
info: executing /bin/ip rule show
info: executing /bin/ip -6 rule show
info: module ethtool not loaded (module init failed: /sbin/ethtool: not found)
info: address: using default mtu 1500
info: address: max_mtu undefined
info: executing /usr/sbin/ip vrf id
info: mgmt vrf_context = False
info: dhclient: dhclient_retry_on_failure set to 0
info: executing /bin/ip addr help
info: address metric support: OK
info: module ethtool not loaded (module init failed: /sbin/ethtool: not found)
info: module ppp not loaded (module init failed: no /usr/bin/pon found)
info: module mstpctl not loaded (module init failed: no /sbin/mstpctl found)
info: module batman_adv not loaded (module init failed: no /usr/sbin/batctl found)
info: module openvswitch_port not loaded (module init failed: no /usr/bin/ovs-vsctl found)
info: module openvswitch not loaded (module init failed: no /usr/bin/ovs-vsctl found)
info: looking for user scripts under /etc/network
info: loading scripts under /etc/network/if-pre-up.d ...
info: loading scripts under /etc/network/if-up.d ...
info: loading scripts under /etc/network/if-post-up.d ...
info: loading scripts under /etc/network/if-pre-down.d ...
info: loading scripts under /etc/network/if-down.d ...
info: loading scripts under /etc/network/if-post-down.d ...
info: using mgmt iface default prefix eth
info: processing interfaces file /etc/network/interfaces
debug: vmbr0: evaluating port expr '['eno1']'
debug: scheduling '['pre-up', 'up', 'post-up']' for ['vmbr1']
debug: dependency graph {
lo : []
eno1 : []
eno2 : []
vmbr0 : ['eno1']
vmbr1 : []
}
info: vmbr1: running ops ...
debug: vmbr1: pre-up : running module xfrm
debug: vmbr1: pre-up : running module link
debug: vmbr1: pre-up : running module bond
debug: vmbr1: pre-up : running module vlan
debug: vmbr1: pre-up : running module vxlan
debug: vmbr1: pre-up : running module usercmds
debug: vmbr1: pre-up : running module bridge
info: vmbr1: netlink: ip link add dev vmbr1 type bridge
info: vmbr1: applying bridge settings
info: vmbr1: set bridge-fd 0
info: vmbr1: set bridge-mcsnoop yes
info: reading '/sys/class/net/vmbr1/bridge/stp_state'
info: vmbr1: netlink: ip link set dev vmbr1 type bridge (with attributes)
debug: attributes: {1: 0, 23: True}
debug: vmbr1: pre-up : running module bridgevlan
debug: vmbr1: pre-up : running module tunnel
debug: vmbr1: pre-up : running module vrf
debug: vmbr1: pre-up : running module address
info: executing /sbin/sysctl net.mpls.conf.vmbr1.input=0
info: writing '1
' to file /proc/sys/net/ipv4/conf/vmbr1/forwarding
info: writing '1
' to file /proc/sys/net/ipv6/conf/vmbr1/forwarding
info: vmbr1: netlink: ip addr add 192.168.1.254/24 dev vmbr1
info: writing '0' to file /proc/sys/net/ipv4/conf/vmbr1/arp_accept
debug: vmbr1: pre-up : running script /etc/network/if-pre-up.d/static_ipv6
info: executing /etc/network/if-pre-up.d/static_ipv6
debug: vmbr1: pre-up : running script /etc/network/if-pre-up.d/wait_for_link_up
