Hello!
I am having a rather annoying problem with iSCSI. I have a SAN with 2x 10GbE interfaces bonded into a 20GbE ether-channel between my SAN and my proxmox server. The SAN is running iSCSI and providing a LUN to the proxmox server for VM storage. However the SAN is in multiple subnets and it appears to advertise the LUN multiple times (one for each subnet) which in turn makes the proxmox server unable to add the iSCSI LUN (Most of the subnets are unreachable from the proxmox server, plus I want the traffic to go over the 20Gig) . If I force iSCSI to listen on a single interface it works just fine. However I now have to add another server to the SAN. And I am back to the same spot, I cant add the iSCSI LUN
On a side note, I am doing all of this so I can cluster the proxmox servers (and migrate VMs). Do I have to add the iSCSI storage to both servers or just to one, then cluster the servers? I don't remember, it has been a while since I did this last.
Both servers are running the same version of software:
FOUNDRY:~# pveversion -v
pve-manager: 1.8-18 (pve-manager/1.8/6070)
running kernel: 2.6.35-1-pve
proxmox-ve-2.6.35: 1.8-11
pve-kernel-2.6.35-1-pve: 2.6.35-11
pve-kernel-2.6.24-10-pve: 2.6.24-21
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-30
pve-firmware: 1.0-11
libpve-storage-perl: 1.0-17
vncterm: 0.9-2
vzctl: 3.0.28-1pve1
vzdump: 1.2-14
vzprocps: 2.0.11-2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.14.1-1
ksm-control-daemon: 1.0-6
Any ideas?
Thanks in advance!
--Forced
I am having a rather annoying problem with iSCSI. I have a SAN with 2x 10GbE interfaces bonded into a 20GbE ether-channel between my SAN and my proxmox server. The SAN is running iSCSI and providing a LUN to the proxmox server for VM storage. However the SAN is in multiple subnets and it appears to advertise the LUN multiple times (one for each subnet) which in turn makes the proxmox server unable to add the iSCSI LUN (Most of the subnets are unreachable from the proxmox server, plus I want the traffic to go over the 20Gig) . If I force iSCSI to listen on a single interface it works just fine. However I now have to add another server to the SAN. And I am back to the same spot, I cant add the iSCSI LUN
On a side note, I am doing all of this so I can cluster the proxmox servers (and migrate VMs). Do I have to add the iSCSI storage to both servers or just to one, then cluster the servers? I don't remember, it has been a while since I did this last.
Both servers are running the same version of software:
FOUNDRY:~# pveversion -v
pve-manager: 1.8-18 (pve-manager/1.8/6070)
running kernel: 2.6.35-1-pve
proxmox-ve-2.6.35: 1.8-11
pve-kernel-2.6.35-1-pve: 2.6.35-11
pve-kernel-2.6.24-10-pve: 2.6.24-21
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-30
pve-firmware: 1.0-11
libpve-storage-perl: 1.0-17
vncterm: 0.9-2
vzctl: 3.0.28-1pve1
vzdump: 1.2-14
vzprocps: 2.0.11-2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.14.1-1
ksm-control-daemon: 1.0-6
Any ideas?
Thanks in advance!
--Forced
Last edited: