Unable to access GUI after install

[leroadrunner]

Hi, newbie here, just installed ProxMox VE 6.4 (because I only had a 1GB key around), anyways, its in my home network. I used a NetGear router. I have assigned it address 192.168.1.50, and I see it there (I can ping it successfully and it responds), but the GUI on HTTPS 8006 just spins. I tried in Putty, Curl nothing. This server is hardwired.


Anything else to check?

EDIT: Never mind, I reinstalled, this time with the wire actually connected. When I had first installed it, I wasnt actually connected, I guess it didnt like it. Thanks

 

[Spoonman2002]

- empty your browser cache
- reboot Proxmox host (power off/on)
- try different browser, firefox, chrome.

 

[Dunuin]

So https://192.168.1.50:8006 isn't working?

If not then you would need to debug stuff via the local console. For example checking if the pveproxy service is running (systemctl status pveproxy.service pvedaemon.service) or if you can access the webUI from localhost (curl https://localhost:8006 -k | grep title) and if the server is listening on ports 8006 and 22 (ss -tulpn).

Btw...you really shouldn`t use PVE6.4. That's already over 1 year end-of-life, so 1 year of unfixed vulnerabilities. And its quite alloying to upgrade from PVE6 to 7 and then PVE 7 top 8. I really would recommend to start with a fresh PVE8.

 

[leroadrunner]

Please see my edit. Re-Install connected worked!

 

[Spoonman2002]

"This server is hardwired."

- guess what....it wasn't.

 

[RamazanSancar]

I'm having the same problem.

I followed this one exactly as the installation step.
https://github.com/pimox/pimox7/

My device is Raspberry Pi 4 8GB

 

[Spoonman2002]

I'm having the same problem.

I followed this one exactly as the installation step.
https://github.com/pimox/pimox7/

My device is Raspberry Pi 4 8GB

...not sure if people are willing to help you, pimox is not officially developed by Proxmox team.

 

[RamazanSancar]

...not sure if people are willing to help you, pimox is not officially developed by Proxmox team.

I follow the installation steps again from 0 as I think there is problem with the installation steps.

https://forum.proxmox.com/threads/how-to-run-pve-7-on-a-raspberry-pi.95658/

 

[Spoonman2002]

the manual says you got to give the Pi a static ip address, "you cannot use DHCP".

 

[RamazanSancar]

the manual says you got to give the Pi a static ip address, "you cannot use DHCP".

I don't think the problem is caused by threading.
I can connect via ssh via that ip. The only problem is that I can't access port 8006 over the web.

 

[Spoonman2002]

Have you ever considered using a different local DNS name?
Instead of ".local" you can use ".home.arpa"
see: https://en.wikipedia.org/wiki/.arpa

Not saying this will solve your login problem, but .local can cause strange behaviour.

 

[RamazanSancar]

Have you tried with different browsers, like Chrome...

Yes, the result has not changed.
As a result of my new installation, the situation is as follows:

Curl request:


Mozilla Firefox:

 

[Spoonman2002]

Looks like the html part is empty/missing (that's why you get no web menu).
My curl command outputs a lot more, also that html layout part.

 

[RamazanSancar]

Looks like the html part is empty/missing (that's why you get no web menu).
My curl command outputs a lot more, also that html layout part.

I don't know how, but now I can access it.

Last time I checked this: https://bugzilla.proxmox.com/show_bug.cgi?id=2928#c6

Thanks for help <3

 

[Dunuin]

Maybe an IP collision? Are you sure that static IP isn't part of the DHCP range of your router or something similar?

 

[RamazanSancar]

Maybe an IP collision? Are you sure that static IP isn't part of the DHCP range of your router or something similar?

Yes, I'm sure there are a maximum of 10-15 devices at home, and the highest ip of them is 50.

I got 222 ip address for raspi. I don't think there is a device that can take it

 

[dcsapak]

Yes, the result has not changed.
As a result of my new installation, the situation is as follows:

Curl request:
View attachment 53804

you're using http:// here, but you have to use https://

 

[proxie-moxie]

I'm having the same problem.

I followed this one exactly as the installation step.
https://github.com/pimox/pimox7/

My device is Raspberry Pi 4 8GB

follow this instruction , there is a bug in the script =

https://youtu.be/g1FXZIvVkq4?si=myhavFh5J5D-iZp7&t=300

 

[RamazanSancar]

follow this instruction , there is a bug in the script =

https://youtu.be/g1FXZIvVkq4?si=myhavFh5J5D-iZp7&t=300

Now I'm running my projects with Docker. Thanks for the solution