B
bougui
Guest
Hi all
I'm trying to install tiny7 a trim down version of Windows 7, (maybe it's build with old iso ' but I'm stuck with this iso now )
When I created the VM I can boot from the iso but after a reboot I cant boot it. I even canot boot from the cd iso the one from which I just installed !
Any advise on how to recover this would be great to I just need to donwgrade pve-qemu-kvm: 0.13.0-3 if so any pointer on how to do this.
I was at 2.6.24-11-pve earlier with the same problem
Also any pointer of how to correctly create a Windows 7 kvm
pveversion -v
pve-manager: 1.7-10 (pve-manager/1.7/5323)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.7-30
pve-kernel-2.6.32-4-pve: 2.6.32-30
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-28
pve-firmware: 1.0-10
libpve-storage-perl: 1.0-16
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-10
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.13.0-3
ksm-control-daemon: 1.0-4
I'm with this pve version because I will need openvz shortly
Here is the vm config file
name: Windows7
ide2: local:iso/Windows.Tiny7.Rev01.Unattended.Activated.CD.eXPerience.iso,media=cdrom
vlan0: e1000=A2:CC:8F:0C:B2:1D
ostype: wvista
ide0: local:101/vm-101-disk-1.raw
memory: 768
sockets: 1
boot: cd
freeze: 0
cpuunits: 1000
acpi: 0
kvm: 1
bootdisk: ide0
onboot: 0
cores: 2
thanks for any advice
I'm trying to install tiny7 a trim down version of Windows 7, (maybe it's build with old iso ' but I'm stuck with this iso now )
When I created the VM I can boot from the iso but after a reboot I cant boot it. I even canot boot from the cd iso the one from which I just installed !
Any advise on how to recover this would be great to I just need to donwgrade pve-qemu-kvm: 0.13.0-3 if so any pointer on how to do this.
I was at 2.6.24-11-pve earlier with the same problem
Also any pointer of how to correctly create a Windows 7 kvm
pveversion -v
pve-manager: 1.7-10 (pve-manager/1.7/5323)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.7-30
pve-kernel-2.6.32-4-pve: 2.6.32-30
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-28
pve-firmware: 1.0-10
libpve-storage-perl: 1.0-16
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-10
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.13.0-3
ksm-control-daemon: 1.0-4
I'm with this pve version because I will need openvz shortly
Here is the vm config file
name: Windows7
ide2: local:iso/Windows.Tiny7.Rev01.Unattended.Activated.CD.eXPerience.iso,media=cdrom
vlan0: e1000=A2:CC:8F:0C:B2:1D
ostype: wvista
ide0: local:101/vm-101-disk-1.raw
memory: 768
sockets: 1
boot: cd
freeze: 0
cpuunits: 1000
acpi: 0
kvm: 1
bootdisk: ide0
onboot: 0
cores: 2
thanks for any advice
