Support for PERC H310 Mini on PVE9

[Tacioandrade]

Hello everyone! I have a Dell R620 with a PERC H310 Mini at a client's site, and when trying to install PVE9 I was unable to list the RAIDs. I tried with 8.1 and had the same problem, and finally with 7 it installed normally.

After that, I updated PVE from 7 to 9 and restarted. After restarting, it wouldn't boot.

From what I've read, the problem is that after Kernel 6.8.12-13-pve, the controller seems to have lost support. I would like to know if anyone using this controller has found any workaround to update it. For now, I've had to use Kernel 5.15.158-2 as the default kernel to avoid leaving the system idle while I find a solution.

I appreciate any advice you can give me.

 

[Onslow]

Hi, @Tacioandrade . Maybe this?

O

[SOLVED] Post in thread 'PBS 4 upgrade on a Dell NX3230, doesn't fully boot.'

Saturday at 16:16

@nd-2999
I've just spotted in the "Known issues" of
https://pbs.proxmox.com/wiki/Roadmap#Proxmox_Backup_Server_4.1

"

Potential issues booting into kernel 6.17 on some Dell PowerEdge servers​

Some users have reported failure to boot into kernel 6.17 and machine check errors on certain Dell PowerEdge servers, while kernel 6.14 boots successfully. It is reported that enabling SR-IOV Global and I/OAT DMA in the firmware helps. See this forum thread...

• Onslow