=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-9YN162
Serial Number: S1D265E2
LU WWN Device Id: 5 000c50 04b61f39e
Firmware Version: CC4B
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Sep 17 17:12:46 2017 -05
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 096 006 Pre-fail Always - 83885520
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 192
5 Reallocated_Sector_Ct 0x0033 087 087 036 Pre-fail Always - 18072
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 161871163
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13245
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 158
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 239
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 25 28 31
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 403
190 Airflow_Temperature_Cel 0x0022 052 047 045 Old_age Always - 48 (Min/Max 45/48)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 90
193 Load_Cycle_Count 0x0032 070 070 000 Old_age Always - 60805
194 Temperature_Celsius 0x0022 048 053 000 Old_age Always - 48 (0 21 0 0 0)
197 Current_Pending_Sector 0x0012 089 088 000 Old_age Always - 1952
198 Offline_Uncorrectable 0x0010 089 088 000 Old_age Offline - 1952
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 10132h+03m+42.237s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 8728983085089
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 7409737501156
SMART Error Log Version: 1
ATA Error Count: 176 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 176 occurred at disk power-on lifetime: 12593 hours (524 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6b 57 65 00 Error: UNC at LBA = 0x0065576b = 6641515
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 6b 57 65 40 00 00:07:01.968 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:07:01.817 SET FEATURES [Disable SATA feature]
ea 00 00 00 00 00 a0 00 00:07:01.817 FLUSH CACHE EXT
ef 02 00 00 00 00 a0 00 00:07:01.761 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:06:42.373 NOP [Abort queued commands]
Error 175 occurred at disk power-on lifetime: 12593 hours (524 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 57 65 00 Error: UNC at LBA = 0x00655780 = 6641536
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 c0 6b 57 65 40 00 00:06:30.844 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 00:06:30.844 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:06:30.842 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 00:06:30.842 READ FPDMA QUEUED
60 00 b8 ff ff ff 4f 00 00:06:30.831 READ FPDMA QUEUED
Error 174 occurred at disk power-on lifetime: 12593 hours (524 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 98 a1 65 00 Error: UNC at LBA = 0x0065a198 = 6660504
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 93 a1 65 40 00 00:06:19.197 READ FPDMA QUEUED
60 00 08 8b a1 65 40 00 00:06:06.353 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:06:05.478 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:06:05.466 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:06:05.353 NOP [Abort queued commands]
Error 173 occurred at disk power-on lifetime: 12593 hours (524 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 8b a1 65 00 Error: UNC at LBA = 0x0065a18b = 6660491
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 8b a1 65 40 00 00:06:02.502 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:06:01.627 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:06:01.626 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:06:01.502 NOP [Abort queued commands]
60 00 08 8b a1 65 40 00 00:05:58.666 READ FPDMA QUEUED
Error 172 occurred at disk power-on lifetime: 12593 hours (524 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 8b a1 65 00 Error: UNC at LBA = 0x0065a18b = 6660491
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 8b a1 65 40 00 00:05:58.666 READ FPDMA QUEUED
60 00 08 7b 8a 0a 40 00 00:05:58.665 READ FPDMA QUEUED
60 00 08 6b 8a 6a 40 00 00:05:58.646 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 00:05:58.630 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 00:05:58.580 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2876 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
