rgmanager start failed

  • Thread starter Thread starter tuliss
  • Start date Start date
T

tuliss

Guest
Helo!

I have a problem when creating Proxmox 2 HA.
I get the error

Starting Cluster Service Manager: [FAILED]
TASK ERROR: command '/etc/init.d/rgmanager start' failed: exit code 1
Click to expand...

clustat
Code: 
 Cluster Status for castle @ Thu Feb  9 17:45:10 2012
Member Status: Quorate


 Member Name                             ID   Status
 ------ ----                             ---- ------
 hawk-1                                      1 Online, Local
 hawk-2                                      2 Online
 hawk-3                                      3 Online

pveversion -v
Code: 
 pve-manager: 2.0-18 (pve-manager/2.0/16283a5a)
running kernel: 2.6.32-6-pve
proxmox-ve-2.6.32: 2.0-55
pve-kernel-2.6.32-6-pve: 2.6.32-55
lvm2: 2.02.88-2pve1
clvm: 2.02.88-2pve1
corosync-pve: 1.4.1-1
openais-pve: 1.1.4-1
libqb: 0.6.0-1
redhat-cluster-pve: 3.1.8-3
pve-cluster: 1.0-17
qemu-server: 2.0-13
pve-firmware: 1.0-14
libpve-common-perl: 1.0-11
libpve-access-control: 1.0-5
libpve-storage-perl: 2.0-9
vncterm: 1.0-2
vzctl: 3.0.29-3pve8
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-1
ksm-control-daemon: 1.1-1

proxmox.jpg
 
dietmar said:
Please can you post your cluster.conf (/etc/pve/cluster.conf)?
Click to expand...

Hello,
I have the same problem here is my Config from cluster.conf

Code: 
<?xml version="1.0"?>
<cluster config_version="10" name="Xnet-CL">
<cman keyfile="/var/lib/pve-cluster/corosync.authkey"/>
<clusternodes>
       <clusternode name="v-mas-01" nodeid="1" votes="1"/>
       <clusternode name="v-sla-01" nodeid="2" votes="1"/>
       <clusternode name="v-sal-02" nodeid="3" votes="1"/>
</clusternodes>
<rm>
       <pvevm autostart="1" vmid="103"/>
</rm>
</cluster>

Is the correct??

greet Jens
 
Last edited:
I use HP 380 G7, it has ILO interface. Can i use ILO interface for create HA Cluster ? ILO interface has SNMP.
 
I have HP C7000 with 6 HP blade serever and full ILO support.
Can I use HA ?

tnx
 
yes, should be no problem.
 
I-ve got the same Problem with mz rgmanager.
****dlm: rgmanager group join failed -1 -1****


I config:
-/etc/default/redhat-cluster-pve (Fence_join is enable) but after reboot i must manual fence_tool join again.....
-cluster (see all nodes in WebGUI)
-fencing (i can fence with command fence_node nodename -vv)
-shared storage (all storage see it)


this is my cluster.conf:
<?xml version="1.0"?>

<cluster config_version="43" name="LIN-CLUPOX-002">

<cman keyfile="/var/lib/pve-cluster/corosync.authkey"/>



<fencedevices>

<fencedevice agent="fence_ipmilan" ipaddr="10.3.1.154" lanplus="1" login="Administrator" name="pox-ti-004" passwd="12345678" power_wait="5"/>

<fencedevice agent="fence_ipmilan" ipaddr="10.3.1.155" lanplus="1" login="Administrator" name="pox-ti-005" passwd="12345678" power_wait="5"/>

<fencedevice agent="fence_ipmilan" ipaddr="10.3.1.156" lanplus="1" login="Administrator" name="pox-ti-006" passwd="12345678" power_wait="5"/>

</fencedevices>



<clusternodes>

<clusternode name="pox-ti-004" nodeid="1" votes="1">

<fence>

<method name="1">

<device name="pox-ti-004"/>

</method>

</fence>

</clusternode>

<clusternode name="pox-ti-005" nodeid="2" votes="1">

<fence>

<method name="1">

<device name="pox-ti-005"/>

</method>

</fence>

</clusternode>

<clusternode name="pox-ti-006" nodeid="3" votes="1">

<fence>

<method name="1">

<device name="pox-ti-006"/>

</method>

</fence>

</clusternode>

</clusternodes>


<rm>

<service autostart="1" exclusive="0" name="service" recovery="relocate"/>

<pvevm autostart="1" vmid="100"/>

</rm>
</cluster>
Click to expand...


I don't know what i'm doing wrong.
 
You must log in or register to reply here.
Top Bottom
Back