Hi all,
I've got a VM with initially about 100GB disk space which I want to enlarge.
I've changed the disk size through the GUI rebooted but drive is not getting bigger.
With fdisk however it reports the proper size that I want to have:
Any idea how I can make this drive to work with the new size?
All the docs I found online are relatively to LVM paritions.
Thanks
I've got a VM with initially about 100GB disk space which I want to enlarge.
I've changed the disk size through the GUI rebooted but drive is not getting bigger.
Code:
[root@dionysos ~]# df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 115G 65G 44G 60% /
tmpfs 7.8G 0 7.8G 0% /dev/shm
/usr/tmpDSK 4.0G 140M 3.7G 4% /tmp
With fdisk however it reports the proper size that I want to have:
Code:
[root@dionysos ~]# fdisk -l
Disk /dev/loop0: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sda: 343.6 GB, 343597383680 bytes
255 heads, 63 sectors/track, 41773 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000dcb4e
Device Boot Start End Blocks Id System
/dev/sda1 1 511 4096000 82 Linux swap / Solaris
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 511 15666 121732096 83 Linux
Any idea how I can make this drive to work with the new size?
All the docs I found online are relatively to LVM paritions.
Thanks