Hello,
I`m preparing server with new installation of Proxmox 8. I have HP Ethernet 10Gb 2-port 557SFP+ Adapter and this device initiates this kernel message at startup:
Kernel: 6.2.16-10-pve
Kernel: 6.1.10-1-pve
It will be cool to fix it before I`ll start to use this server. Can anyone give me any hint ?
I`m preparing server with new installation of Proxmox 8. I have HP Ethernet 10Gb 2-port 557SFP+ Adapter and this device initiates this kernel message at startup:
Kernel: 6.2.16-10-pve
Code:
[ 25.252287] ------------[ cut here ]------------
[ 25.252837] Voluntary context switch within RCU read-side critical section!
[ 25.252843] WARNING: CPU: 34 PID: 2038 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x46f/0x590
[ 25.253892] Modules linked in: sunrpc nfnetlink_log binfmt_misc nfnetlink intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm irqbypass crct10dif_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 aesni_intel ipmi_ssif crypto_simd cryptd mgag200 drm_shmem_helper acpi_ipmi drm_kms_helper ipmi_si rapl syscopyarea mei_me iomemory_vsl(OE) sysfillrect ipmi_devintf intel_cstate pcspkr sysimgblt corsair_cpro mei ipmi_msghandler acpi_pad joydev input_leds mac_hid vhost_net vhost vhost_iotlb tap nct7904 coretemp efi_pstore drm dmi_sysfs ip_tables x_tables autofs4 zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) btrfs blake2b_generic xor raid6_pq libcrc32c simplefb usbkbd usbmouse hid_generic usbhid hid nvme nvme_core crc32_pclmul mpt3sas igb nvme_common ehci_pci i2c_i801 lpc_ich be2net ehci_hcd i2c_algo_bit raid_class i2c_smbus dca scsi_transport_sas wmi
[ 25.258042] CPU: 34 PID: 2038 Comm: python3 Tainted: P OE 6.2.16-10-pve #1
[ 25.258578] Hardware name: Supermicro SSG-6027R-E1R12L-PD006/X9DRD-7LN4F, BIOS 3.3 08/23/2018
[ 25.259073] RIP: 0010:rcu_note_context_switch+0x46f/0x590
[ 25.259565] Code: 00 00 49 8b 45 08 49 39 45 18 0f 85 3f fe ff ff 0f 0b e9 38 fe ff ff 48 c7 c7 d0 49 b1 8a c6 05 d7 11 40 02 01 e8 b1 4a f3 ff <0f> 0b e9 f5 fb ff ff a9 ff ff ff 7f 0f 84 9d fc ff ff 65 48 8b 3c
[ 25.260550] RSP: 0018:ffffc2300f5176d0 EFLAGS: 00010046
[ 25.261039] RAX: 0000000000000000 RBX: ffff9d6e3fdb2e80 RCX: 0000000000000000
[ 25.261526] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 25.262038] RBP: ffffc2300f5176f0 R08: 0000000000000000 R09: 0000000000000000
[ 25.262544] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 25.263002] R13: 0000000000000000 R14: ffff9d2fd23d1980 R15: ffff9d2fcac00ab0
[ 25.263455] FS: 00007fcc2bef9040(0000) GS:ffff9d6e3fd80000(0000) knlGS:0000000000000000
[ 25.263903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.264343] CR2: 00000000004784ea CR3: 0000000114dac002 CR4: 00000000001706e0
[ 25.264781] Call Trace:
[ 25.265208] <TASK>
[ 25.265626] __schedule+0xc9/0x1510
[ 25.266084] ? clockevents_program_event+0xb6/0x140
[ 25.266527] ? tick_program_event+0x43/0xa0
[ 25.266922] ? hrtimer_reprogram+0x88/0xe0
[ 25.267312] ? hrtimer_start_range_ns+0x138/0x3a0
[ 25.267693] schedule+0x63/0x110
[ 25.268064] schedule_hrtimeout_range_clock+0xe2/0x130
[ 25.268434] ? __pfx_hrtimer_wakeup+0x10/0x10
[ 25.268800] schedule_hrtimeout_range+0x13/0x30
[ 25.269166] usleep_range_state+0x65/0xa0
[ 25.269528] be_mcc_notify_wait+0xbf/0x150 [be2net]
[ 25.269920] be_cmd_get_hsw_config+0x179/0x1a0 [be2net]
[ 25.270337] be_ndo_bridge_getlink+0xec/0x110 [be2net]
[ 25.270696] rtnl_bridge_getlink+0x145/0x1d0
[ 25.271049] netlink_dump+0x1c3/0x340
[ 25.271403] __netlink_dump_start+0x1ca/0x300
[ 25.271758] ? __pfx_rtnl_bridge_getlink+0x10/0x10
[ 25.272111] rtnetlink_rcv_msg+0x2ac/0x430
[ 25.272461] ? __pfx_rtnl_bridge_getlink+0x10/0x10
[ 25.272808] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 25.273156] netlink_rcv_skb+0x5d/0x110
[ 25.273500] rtnetlink_rcv+0x15/0x30
[ 25.273861] netlink_unicast+0x247/0x390
[ 25.274256] netlink_sendmsg+0x25e/0x4e0
[ 25.274580] sock_sendmsg+0x6d/0x70
[ 25.274899] __sys_sendto+0x14d/0x1b0
[ 25.275209] __x64_sys_sendto+0x24/0x40
[ 25.275505] do_syscall_64+0x5b/0x90
[ 25.275796] ? do_syscall_64+0x67/0x90
[ 25.276075] ? handle_mm_fault+0x119/0x330
[ 25.276346] ? lock_mm_and_find_vma+0x43/0x230
[ 25.276607] ? exit_to_user_mode_prepare+0x39/0x190
[ 25.276863] ? irqentry_exit_to_user_mode+0x9/0x20
[ 25.277117] ? irqentry_exit+0x43/0x50
[ 25.277362] ? exc_page_fault+0x91/0x1b0
[ 25.277597] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 25.277843] RIP: 0033:0x7fcc2c0048a4
[ 25.278103] Code: 89 4c 24 1c e8 2d ae f7 ff 44 8b 54 24 1c 8b 3c 24 45 31 c9 89 c5 48 8b 54 24 10 48 8b 74 24 08 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 04 24 e8 79 ae f7 ff 48 8b 04
[ 25.278609] RSP: 002b:00007ffdf98d7470 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 25.278858] RAX: ffffffffffffffda RBX: 00007ffdf98d7550 RCX: 00007fcc2c0048a4
[ 25.279108] RDX: 0000000000000028 RSI: 00007fcc2b0d0c30 RDI: 0000000000000007
[ 25.279360] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 25.279608] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 25.279874] R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000
[ 25.280121] </TASK>
[ 25.280373] ---[ end trace 0000000000000000 ]---Kernel: 6.1.10-1-pve
Code:
[ 25.087148] ------------[ cut here ]------------
[ 25.087732] Voluntary context switch within RCU read-side critical section!
[ 25.087737] WARNING: CPU: 5 PID: 2625 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x46f/0x590
[ 25.088789] Modules linked in: sunrpc nfnetlink_log binfmt_misc nfnetlink intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm irqbypass crct10dif_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 aesni_intel crypto_simd ipmi_ssif cryptd acpi_ipmi mgag200 drm_shmem_helper rapl drm_kms_helper ipmi_si mei_me fb_sys_fops syscopyarea iomemory_vsl(O) sysfillrect ipmi_devintf intel_cstate pcspkr sysimgblt corsair_cpro mei ipmi_msghandler joydev acpi_pad input_leds mac_hid vhost_net vhost vhost_iotlb tap nct7904 coretemp efi_pstore drm dmi_sysfs ip_tables x_tables autofs4 zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) btrfs blake2b_generic xor raid6_pq zstd_compress libcrc32c simplefb hid_generic usbkbd usbmouse usbhid hid nvme crc32_pclmul nvme_core nvme_common igb ehci_pci i2c_i801 mpt3sas i2c_algo_bit i2c_smbus lpc_ich ehci_hcd raid_class dca be2net scsi_transport_sas wmi
[ 25.092928] CPU: 5 PID: 2625 Comm: python3 Tainted: P O 6.1.10-1-pve #1
[ 25.093445] Hardware name: Supermicro SSG-6027R-E1R12L-PD006/X9DRD-7LN4F, BIOS 3.3 08/23/2018
[ 25.093960] RIP: 0010:rcu_note_context_switch+0x46f/0x590
[ 25.094473] Code: 00 00 49 8b 45 08 49 39 45 18 0f 85 3f fe ff ff 0f 0b e9 38 fe ff ff 48 c7 c7 00 61 19 b5 c6 05 a5 cc c2 02 01 e8 18 86 ca 00 <0f> 0b e9 f5 fb ff ff a9 ff ff ff 7f 0f 84 9d fc ff ff 65 48 8b 3c
[ 25.095521] RSP: 0018:ffffb0174fe0b7b8 EFLAGS: 00010046
[ 25.096053] RAX: 0000000000000000 RBX: ffff9b56ff972280 RCX: 0000000000000000
[ 25.096643] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 25.097201] RBP: ffffb0174fe0b7d8 R08: 0000000000000000 R09: 0000000000000000
[ 25.097777] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 25.098329] R13: 0000000000000000 R14: ffff9b5810164c80 R15: ffff9b189da00ab0
[ 25.098843] FS: 00007fc841582040(0000) GS:ffff9b56ff940000(0000) knlGS:0000000000000000
[ 25.099388] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.099903] CR2: 00000000004784ea CR3: 00000040871f6005 CR4: 00000000001706e0
[ 25.100450] Call Trace:
[ 25.100986] <TASK>
[ 25.101487] __schedule+0xb5/0x1490
[ 25.101989] ? tick_program_event+0x43/0xa0
[ 25.102489] ? hrtimer_reprogram+0x88/0xe0
[ 25.102985] schedule+0x63/0x110
[ 25.103470] schedule_hrtimeout_range_clock+0xe2/0x130
[ 25.103949] ? __hrtimer_init+0x130/0x130
[ 25.104460] schedule_hrtimeout_range+0x13/0x30
[ 25.104962] usleep_range_state+0x65/0xa0
[ 25.105415] be_mcc_notify_wait+0xbf/0x150 [be2net]
[ 25.105869] be_cmd_get_hsw_config+0x179/0x1a0 [be2net]
[ 25.106318] be_ndo_bridge_getlink+0xec/0x110 [be2net]
[ 25.106759] rtnl_bridge_getlink+0x145/0x1d0
[ 25.107187] netlink_dump+0x1b0/0x330
[ 25.107605] __netlink_dump_start+0x1ca/0x300
[ 25.108014] ? valid_bridge_getlink_req.constprop.0+0x1d0/0x1d0
[ 25.108467] rtnetlink_rcv_msg+0x2ac/0x430
[ 25.108897] ? valid_bridge_getlink_req.constprop.0+0x1d0/0x1d0
[ 25.109287] ? rtnl_calcit.isra.0+0x150/0x150
[ 25.109668] netlink_rcv_skb+0x57/0x110
[ 25.110041] rtnetlink_rcv+0x15/0x30
[ 25.110403] netlink_unicast+0x247/0x390
[ 25.110765] netlink_sendmsg+0x250/0x4d0
[ 25.111122] sock_sendmsg+0x6d/0x70
[ 25.111474] __sys_sendto+0x14d/0x1b0
[ 25.111817] __x64_sys_sendto+0x24/0x40
[ 25.112148] do_syscall_64+0x5b/0x90
[ 25.112537] ? do_user_addr_fault+0x1e8/0x6a0
[ 25.112859] ? exit_to_user_mode_prepare+0x39/0x190
[ 25.113167] ? irqentry_exit_to_user_mode+0x9/0x20
[ 25.113466] ? irqentry_exit+0x43/0x50
[ 25.113752] ? exc_page_fault+0x91/0x1b0
[ 25.114030] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 25.114303] RIP: 0033:0x7fc84168d8a4
[ 25.114570] Code: 89 4c 24 1c e8 2d ae f7 ff 44 8b 54 24 1c 8b 3c 24 45 31 c9 89 c5 48 8b 54 24 10 48 8b 74 24 08 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 04 24 e8 79 ae f7 ff 48 8b 04
[ 25.115127] RSP: 002b:00007fffdc8c27d0 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 25.115400] RAX: ffffffffffffffda RBX: 00007fffdc8c28b0 RCX: 00007fc84168d8a4
[ 25.115669] RDX: 0000000000000028 RSI: 00007fc840758cd0 RDI: 0000000000000007
[ 25.115937] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 25.116221] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 25.116528] R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000
[ 25.116812] </TASK>
[ 25.117075] ---[ end trace 0000000000000000 ]---It will be cool to fix it before I`ll start to use this server. Can anyone give me any hint ?
Code:
# pveversion -v
proxmox-ve: 8.0.2 (running kernel: 6.2.16-10-pve)
pve-manager: 8.0.4 (running version: 8.0.4/d258a813cfa6b390)
pve-kernel-6.2: 8.0.5
proxmox-kernel-helper: 8.0.3
pve-kernel-6.1: 7.3-4
proxmox-kernel-6.2.16-10-pve: 6.2.16-10
proxmox-kernel-6.2: 6.2.16-10
pve-kernel-6.1.10-1-pve: 6.1.10-1
ceph-fuse: 17.2.6-pve1+3
corosync: 3.1.7-pve3
criu: 3.17.1-2
glusterfs-client: 10.3-5
ifupdown2: 3.2.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-4
libknet1: 1.25-pve1
libproxmox-acme-perl: 1.4.6
libproxmox-backup-qemu0: 1.4.0
libproxmox-rs-perl: 0.3.1
libpve-access-control: 8.0.4
libpve-apiclient-perl: 3.3.1
libpve-common-perl: 8.0.7
libpve-guest-common-perl: 5.0.4
libpve-http-server-perl: 5.0.4
libpve-rs-perl: 0.8.5
libpve-storage-perl: 8.0.2
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 5.0.2-4
lxcfs: 5.0.3-pve3
novnc-pve: 1.4.0-2
proxmox-backup-client: 3.0.2-1
proxmox-backup-file-restore: 3.0.2-1
proxmox-kernel-helper: 8.0.3
proxmox-mail-forward: 0.2.0
proxmox-mini-journalreader: 1.4.0
proxmox-widget-toolkit: 4.0.6
pve-cluster: 8.0.3
pve-container: 5.0.4
pve-docs: 8.0.4
pve-edk2-firmware: 3.20230228-4
pve-firewall: 5.0.3
pve-firmware: 3.7-1
pve-ha-manager: 4.0.2
pve-i18n: 3.0.5
pve-qemu-kvm: 8.0.2-4
pve-xtermjs: 4.16.0-3
qemu-server: 8.0.6
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.1.12-pve1