I got an R730 and I am trying to pass-through the GPU, which I did, and I was able to select and add the GPU to the VM. After I installed the drivers and started using the GPU, like running a benchmark or even remotely connecting to it using Nice-DCV, the server restarts. I have tried "journalctl -p err -f" to see if I could see any errors, but it never says anything.
I know the GPU works; I have the same setup working on a desktop motherboard (same GPU, Proxmox, Nice-DCV) without any issues. I would like it to work on R730. Is there something I need to enable in the BIOS? I have enabled Virtualization, decoding about 4G, and the SR-IOV.
If you have any ideas, please let me know.
Thank you all.
I know the GPU works; I have the same setup working on a desktop motherboard (same GPU, Proxmox, Nice-DCV) without any issues. I would like it to work on R730. Is there something I need to enable in the BIOS? I have enabled Virtualization, decoding about 4G, and the SR-IOV.
If you have any ideas, please let me know.
Thank you all.