Quorum disk and only two nodes

[diaolin]

and a file/images server of course!

Do you have any suggestion howto create it?
Diaolin

 

[dietmar]

There is an interesting article at:

http://magazine.redhat.com/2007/12/19/enhancing-cluster-quorum-with-qdisk/

 

[diaolin]

Yeah, seen before writing here.
This mean that i should change the method or simply add the quorum disk to the existing
proxmoxve2.0 config?

Tx, DIaolin

 

[dietmar]

Yeah, seen before writing here.
This mean that i should change the method or simply add the quorum disk to the existing
proxmoxve2.0 config?

I am currently busy doing other things - maybe you can find out yourself and post your findings here?

 

[diaolin]

Ok, i search myself.
Tx.

 

[nate]

Ok, i search myself.
Tx.

Curious if yo made any progress? I have the same issue. I'm kind of a nub to proxmox and I haven't found any good example of how to do this with mkqdisk, etc. ? Anything you could share would be great.

 

[jag3773]

I thought I would post the quorum disk config that we are using. Essentially, we share a small 10MB iSCSI volume from one of our backup servers as the quorum disk. The following URLs were used for reference:

[REF] http://www.linuxjournal.com/content...cked-iscsi-targets-red-hat-enterprise-linux-6
[REF] http://magazine.redhat.com/2007/12/19/enhancing-cluster-quorum-with-qdisk/


The actual cluster.conf configuration that we are using:

  <cman expected_votes="3" keyfile="/var/lib/pve-cluster/corosync.authkey"/>
  <quorumd interval="3" label="proxmox1_qdisk" tko="10" votes="1">
    <heuristic interval="3" program="ping $GATEWAY -c1 -w1" score="1" tko="4"/>
    <heuristic interval="3" program="ip addr | grep eth1 | grep -q UP" score="2" tko="3"/>
  </quorumd>
  <totem token="54000"/>

In this case, eth1 is directly connected to both nodes. We have configured DRBD and the cluster to use eth1 for communication, which is why the grep for "UP" is helpful.