[SOLVED] QNAP QNA-T310G1S Aquantia Driver

[gasmanc]

Hi,

I have a NUC with a thunderbolt 3 port to which I have connected a QNA-T310G1S. Its not showing up in lspci.

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Iris Plus Graphics 640 (rev 06)
00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1c.7 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #8 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point LPC Controller/eSPI Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (4) I219-V (rev 21)
01:00.0 PCI bridge: Intel Corporation JHL6340 Thunderbolt 3 Bridge (C step) [Alpine Ridge 2C 2016] (rev 02)
02:00.0 PCI bridge: Intel Corporation JHL6340 Thunderbolt 3 Bridge (C step) [Alpine Ridge 2C 2016] (rev 02)
02:01.0 PCI bridge: Intel Corporation JHL6340 Thunderbolt 3 Bridge (C step) [Alpine Ridge 2C 2016] (rev 02)
02:02.0 PCI bridge: Intel Corporation JHL6340 Thunderbolt 3 Bridge (C step) [Alpine Ridge 2C 2016] (rev 02)
03:00.0 System peripheral: Intel Corporation JHL6340 Thunderbolt 3 NHI (C step) [Alpine Ridge 2C 2016] (rev 02)
3a:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
3b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

I’ve tried installing the AQtion driver with dkms but get this:

./dkms.sh install
dpkg-query: no packages found matching linux-headers-5.0.15-1-pve
Please install the necessary packages linux-headers-5.0.15-1-pve.
Example: sudo apt-get install linux-headers-5.0.15-1-pve.

I’m still learning, but Linux-headers is pve-headers in Proxmox.... so I get an error.

Does anyone have experience with the QNA-T310G1S, or installing the Aquantia driver?

 

[gasmanc]

Sorted.
Didn’t actually have to install the driver - it’s already part of the kernel.

All I needed to do was authorise the thunderbolt device and it shows up.

If anyone needs the instructions I will post them here.

 

[Echoy123]

Hi @gasmanc,
Kindly post the instruction.
I have similar problem.

Thanks in advance.

 

[quaint-engineer]

For anyone else that runs into this issue, you may want to look at this article.

https://www.geeknchic.com/2019/07/m...o-drive-enclosure-work-with-proxmox-on-a-nuc/

 

[camdyman]

Any chance of you explaining this? The link is dead I have the issue too.

 

[ramblurr]

Found it in the internet archive: https://web.archive.org/web/2020080...o-drive-enclosure-work-with-proxmox-on-a-nuc/

 

[camdyman]

Thank you!