Hi I was able to upgrade to PVE9 without issues; I am running 5 VMs (including OPNSense) and 3 LXCs and lost internet connectivity a few hours later. Was unable to see any output or access PVE via the web interface.
Had to restart the machine and everything is working fine now.
Issue - 1: I have two separate ZFS pool where I store (1) nextcloud and (2) plex data. I've mounted the pools on to the LXCs (privellaged) and am able to access the pools using Samba installed in the LCXs. Per Sys Logs I keep getting this message:
Aug 10 03:15:42 pve kernel: audit: type=1400 audit(1754810142.415:3079): apparmor="DENIED" operation="create" class="net" info="failed protocol match" error=-13 profile="docker-default" pid=27338 comm="s6-ipcserver-so" family="unix" sock_type="stream" protocol=0 requested="create" denied="create" addr=none
Issue -2: I've also noticed this
root@pve:~# zpool status
pool: jeep
state: ONLINE
status: Some supported and requested features are not enabled on the pool.
The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: scrub in progress since Sun Aug 10 00:24:01 2025
2.55T / 2.55T scanned, 1.18T / 2.55T issued at 236M/s
0B repaired, 46.45% done, 01:40:59 to go
config:
NAME STATE READ WRITE CKSUM
jeep ONLINE 0 0 0
ata-ST8000VN004-3CP101_WWZ6JJ50 ONLINE 0 0 0
errors: No known data errors
Can someone please help; really new at this.
Had to restart the machine and everything is working fine now.
Issue - 1: I have two separate ZFS pool where I store (1) nextcloud and (2) plex data. I've mounted the pools on to the LXCs (privellaged) and am able to access the pools using Samba installed in the LCXs. Per Sys Logs I keep getting this message:
Aug 10 03:15:42 pve kernel: audit: type=1400 audit(1754810142.415:3079): apparmor="DENIED" operation="create" class="net" info="failed protocol match" error=-13 profile="docker-default" pid=27338 comm="s6-ipcserver-so" family="unix" sock_type="stream" protocol=0 requested="create" denied="create" addr=none
Issue -2: I've also noticed this
root@pve:~# zpool status
pool: jeep
state: ONLINE
status: Some supported and requested features are not enabled on the pool.
The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: scrub in progress since Sun Aug 10 00:24:01 2025
2.55T / 2.55T scanned, 1.18T / 2.55T issued at 236M/s
0B repaired, 46.45% done, 01:40:59 to go
config:
NAME STATE READ WRITE CKSUM
jeep ONLINE 0 0 0
ata-ST8000VN004-3CP101_WWZ6JJ50 ONLINE 0 0 0
errors: No known data errors
Can someone please help; really new at this.
Last edited:
