Proxmox VE 8.0 (beta) released!

ThinkYEAH · Jun 23, 2023

Thank you for the update!

spirit · Jun 26, 2023

Chrischi said:
I am also in - having the same problem.

PVE hangs when booting and waits for networking.service

A workaround for this is.

boot via Grub into Recovery Mode

Code:

systemctl disable networking

reboot normal kernel

Code:

systemctl start networking

start all virtual machines and containers manually (they are all shutdown, because the interface was not present during / after booting).

this way, "networking" is permanently switched off even during reboots and only has to be started after the reboot.
As soon as the issue is resolved, you can set this back to "enable".

I also got the following from the log:

Code:

ifupdown2: main.py:85:main(): error: main exception: name 'traceback' is not defined

However, this may just be a coincidence and have nothing to do with the issue. I hope this will be fixed soon, as I have a headless unit running.

Hi, I have found a bug in ifupdown2 with traceback, I'm not sure it's 100% the same error than you, but can you try to edit:

/usr/share/ifupdown2/ifupdown/scheduler.py

and add "import traceback" just after "import sys" like this:

Code:

import os
import sys
import traceback

also, do you have any error debug log in "/var/log/ifupdown2/ " ?

Chrischi · Jun 26, 2023

spirit said:
Hi, I have found a bug in ifupdown2 with traceback, I'm not sure it's 100% the same error than you, but can you try to edit:

/usr/share/ifupdown2/ifupdown/scheduler.py

and add "import traceback" just after "import sys" like this:

Code:

import os import sys import traceback

also, do you have any error debug log in "/var/log/ifupdown2/ " ?

@spirit
Thanks! already did that.

Here are my debug-logs

patrickhult · Jun 28, 2023

After my upgrade to 8 all but one container works fine. The CT is my big Docker CT and i use that one alot. now it wont start.
the error i got is:
run_buffer: 322 Script exited with status 255
lxc_init: 844 Failed to run lxc.hook.pre-start for container "102"
__lxc_start: 2027 Failed to initialize container "102"
TASK ERROR: startup for container '102' failed
-------------------
How can i fix this? Thanks for a excellent hypervisor btw.

fiona · Jun 28, 2023

Hi,

patrickhult said:
After my upgrade to 8 all but one container works fine. The CT is my big Docker CT and i use that one alot. now it wont start.
the error i got is:
run_buffer: 322 Script exited with status 255
lxc_init: 844 Failed to run lxc.hook.pre-start for container "102"
__lxc_start: 2027 Failed to initialize container "102"
TASK ERROR: startup for container '102' failed
-------------------
How can i fix this? Thanks for a excellent hypervisor btw.

please post the output of pct start 102 --debug and the contents of /run/pve/ct-102.stderr. Note that it's highly recommended to run docker within a VM instead of within a container.

spirit · Jun 28, 2023

Chrischi said:
@spirit
Thanks! already did that.

Here are my debug-logs

mmm, don't find something usefull. I think that it's crashing without logging here.
(can you try to add the "import traceback" in /usr/share/ifupdown2/ifupdown/scheduler.py ?)

t.lamprecht · Jun 28, 2023

Chrischi said:
Here are my debug-logs

spirit said:
mmm, don't find something usefull. I think that it's crashing without logging here.
(can you try to add the "import traceback" in /usr/share/ifupdown2/ifupdown/scheduler.py ?)

FYI, ifupdown2 in version 3.2.0-1+pmx3 that got the fixes for that which you sent, is already available on no-subscription, so upgrading should address this too - at least if it isn't another issue.

davemcl · Jun 28, 2023

spirit said:
do you have any error if you do a "ifreload -a -d" ?

In place upgrade succeeded today, no network issues at all.

athurdent · Jul 1, 2023

Any idea why my network won't start after updating from 7.4?
I can disable networking and bring it up manually fine

Code:

root@epyc:~# ifconfig
enp6s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 40:a6:b7:55:f9:54  txqueuelen 1000  (Ethernet)
        RX packets 14607  bytes 1940108 (1.8 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 7171  bytes 1934710 (1.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 160  bytes 51781 (50.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 160  bytes 51781 (50.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

vlan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.111.111  netmask 255.255.255.0  broadcast 0.0.0.0
        ether 40:a6:b7:55:f9:54  txqueuelen 1000  (Ethernet)
        RX packets 14607  bytes 1735610 (1.6 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 7006  bytes 1923856 (1.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Logs from when it hangs at boot:

Code:

root@epyc:~# cat /var/log/ifupdown2/network_config_ifupdown2_16_Jul-01-2023_12\:15\:58.809373/interfaces
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

auto enp6s0f1
iface enp6s0f1 inet manual

iface eno1 inet manual

iface eno2 inet manual

iface eno3 inet manual

iface eno4 inet manual

auto enp6s0f0
iface enp6s0f0 inet manual

auto vlan1
iface vlan1 inet static
    address 192.168.111.111/24
    gateway 192.168.111.1
    vlan-raw-device enp6s0f0

Code:

root@epyc:~# cat /var/log/ifupdown2/network_config_ifupdown2_16_Jul-01-2023_12\:15\:58.809373/ifupdown2.debug.log
2023-07-01 12:15:58,809: MainThread: ifupdown2: log.py:196:__init_debug_logging(): debug: persistent debugging is initialized
2023-07-01 12:15:58,906: MainThread: ifupdown2: main.py:229:run_query(): debug: args = Namespace(all=False, iflist=[], verbose=False, debug=False, quiet=False, CLASS=['mgmt'], withdepends=False, perfmode=False, nocache=False, excludepats=None, interfacesfile=None, interfacesfileformat='native', type=None, list=True, running=False, checkcurr=False, raw=False, printsavedstate=False, format='native', printdependency=None, syntaxhelp=False, withdefaults=False, version=None, nldebug=False)
2023-07-01 12:15:58,907: MainThread: ifupdown2: main.py:253:run_query(): debug: creating ifupdown object ..
2023-07-01 12:15:58,907: MainThread: ifupdown2.NetlinkListenerWithCache: nlcache.py:2423:get_all_links_wait_netlinkq(): info: requesting link dump
2023-07-01 12:15:58,910: MainThread: ifupdown2.NetlinkListenerWithCache: nlcache.py:2435:get_all_addresses_wait_netlinkq(): info: requesting address dump
2023-07-01 12:15:58,910: MainThread: ifupdown2.NetlinkListenerWithCache: nlcache.py:2445:get_all_netconf_wait_netlinkq(): info: requesting netconf dump
2023-07-01 12:15:58,912: MainThread: ifupdown2.NetlinkListenerWithCache: nlcache.py:2246:reset_errorq(): debug: nlcache: reset errorq
2023-07-01 12:15:58,912: MainThread: ifupdown: ifupdownmain.py:329:__init__(): debug: {'enable_persistent_debug_logging': 'yes', 'use_daemon': 'no', 'template_enable': '1', 'template_engine': 'mako', 'template_lookuppath': '/etc/network/ifupdown2/templates', 'default_interfaces_configfile': '/etc/network/interfaces', 'disable_cli_interfacesfile': '0', 'addon_syntax_check': '0', 'addon_scripts_support': '1', 'addon_python_modules_support': '1', 'multiple_vlan_aware_bridge_support': '1', 'ifquery_check_success_str': 'pass', 'ifquery_check_error_str': 'fail', 'ifquery_check_unknown_str': '', 'ifquery_ifacename_expand_range': '0', 'link_master_slave': '0', 'delay_admin_state_change': '0', 'ifreload_down_changed': '0', 'addr_config_squash': '0', 'ifaceobj_squash': '0', 'adjust_logical_dev_mtu': '1', 'state_dir': '/run/network/'}
2023-07-01 12:15:58,912: MainThread: ifupdown: ifupdownmain.py:1424:load_addon_modules(): info: loading builtin modules from ['/usr/share/ifupdown2/addons']
2023-07-01 12:15:58,917: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module openvswitch not loaded (module init failed: no /usr/bin/ovs-vsctl found)
2023-07-01 12:15:58,918: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module openvswitch_port not loaded (module init failed: no /usr/bin/ovs-vsctl found)
2023-07-01 12:15:58,929: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module ppp not loaded (module init failed: no /usr/bin/pon found)
2023-07-01 12:15:58,930: MainThread: ifupdown: utils.py:301:_log_command_exec(): info: executing modprobe -q bonding
2023-07-01 12:15:58,940: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module batman_adv not loaded (module init failed: no /usr/sbin/batctl found)
2023-07-01 12:15:58,956: MainThread: ifupdown.bridge: bridge.py:644:__init__(): debug: bridge: using reserved vlan range (0, 0)
2023-07-01 12:15:58,956: MainThread: ifupdown.bridge: bridge.py:664:__init__(): debug: bridge: init: warn_on_untagged_bridge_absence=False
2023-07-01 12:15:58,956: MainThread: ifupdown.bridge: bridge.py:671:__init__(): debug: bridge: init: vxlan_bridge_default_igmp_snooping=None
2023-07-01 12:15:58,956: MainThread: ifupdown.bridge: bridge.py:680:__init__(): debug: bridge: init: arp_nd_suppress_only_on_vxlan=False
2023-07-01 12:15:58,956: MainThread: ifupdown.bridge: bridge.py:686:__init__(): debug: bridge: init: bridge_always_up_dummy_brport=None
2023-07-01 12:15:58,956: MainThread: ifupdown: utils.py:301:_log_command_exec(): info: executing /sbin/sysctl net.bridge.bridge-allow-multiple-vlans
2023-07-01 12:15:58,957: MainThread: ifupdown.bridge: bridge.py:696:__init__(): debug: bridge: init: multiple vlans allowed True
2023-07-01 12:15:58,960: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module mstpctl not loaded (module init failed: no /sbin/mstpctl found)
2023-07-01 12:15:58,964: MainThread: ifupdown: utils.py:301:_log_command_exec(): info: executing /bin/ip rule show
2023-07-01 12:15:58,968: MainThread: ifupdown: utils.py:301:_log_command_exec(): info: executing /bin/ip -6 rule show
2023-07-01 12:15:59,119: MainThread: ifupdown.address: address.py:298:__policy_get_default_mtu(): info: address: using default mtu 1500
2023-07-01 12:15:59,119: MainThread: ifupdown.address: address.py:312:__policy_get_max_mtu(): info: address: max_mtu undefined
2023-07-01 12:15:59,119: MainThread: ifupdown: utils.py:301:_log_command_exec(): info: executing /sbin/sysctl net.ipv6.conf.all.accept_ra
2023-07-01 12:15:59,120: MainThread: ifupdown: utils.py:301:_log_command_exec(): info: executing /sbin/sysctl net.ipv6.conf.all.autoconf
2023-07-01 12:15:59,122: MainThread: ifupdown: utils.py:301:_log_command_exec(): info: executing /usr/sbin/ip vrf id
2023-07-01 12:15:59,124: MainThread: ifupdown.dhcp: dhcp.py:55:__init__(): info: mgmt vrf_context = False
2023-07-01 12:15:59,124: MainThread: ifupdown.dhcp: dhcp.py:70:__init__(): debug: dhclient: dhclient_retry_on_failure set to 0
2023-07-01 12:15:59,125: MainThread: ifupdown.addressvirtual: addressvirtual.py:99:__init__(): info: executing /bin/ip addr help
2023-07-01 12:15:59,126: MainThread: ifupdown.addressvirtual: addressvirtual.py:104:__init__(): info: address metric support: OK
2023-07-01 12:15:59,128: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module ppp not loaded (module init failed: no /usr/bin/pon found)
2023-07-01 12:15:59,129: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module mstpctl not loaded (module init failed: no /sbin/mstpctl found)
2023-07-01 12:15:59,130: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module batman_adv not loaded (module init failed: no /usr/sbin/batctl found)
2023-07-01 12:15:59,130: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module openvswitch_port not loaded (module init failed: no /usr/bin/ovs-vsctl found)
2023-07-01 12:15:59,131: MainThread: ifupdown: ifupdownmain.py:1449:load_addon_modules(): info: module openvswitch not loaded (module init failed: no /usr/bin/ovs-vsctl found)
2023-07-01 12:15:59,131: MainThread: ifupdown: ifupdownmain.py:1536:load_scripts(): info: looking for user scripts under /etc/network
2023-07-01 12:15:59,131: MainThread: ifupdown: ifupdownmain.py:1539:load_scripts(): info: loading scripts under /etc/network/if-pre-up.d ...
2023-07-01 12:15:59,131: MainThread: ifupdown: ifupdownmain.py:1539:load_scripts(): info: loading scripts under /etc/network/if-up.d ...
2023-07-01 12:15:59,131: MainThread: ifupdown: ifupdownmain.py:1539:load_scripts(): info: loading scripts under /etc/network/if-post-up.d ...
2023-07-01 12:15:59,131: MainThread: ifupdown: ifupdownmain.py:1539:load_scripts(): info: loading scripts under /etc/network/if-pre-down.d ...
2023-07-01 12:15:59,131: MainThread: ifupdown: ifupdownmain.py:1539:load_scripts(): info: loading scripts under /etc/network/if-down.d ...
2023-07-01 12:15:59,132: MainThread: ifupdown: ifupdownmain.py:1539:load_scripts(): info: loading scripts under /etc/network/if-post-down.d ...
2023-07-01 12:15:59,132: MainThread: ifupdown: ifupdownmain.py:396:__init__(): info: using mgmt iface default prefix eth
2023-07-01 12:15:59,132: MainThread: ifupdown: ifupdownmain.py:2004:query(): debug: setting flag ALL
2023-07-01 12:15:59,132: MainThread: ifupdown.networkInterfaces: networkinterfaces.py:506:read_file(): info: processing interfaces file /etc/network/interfaces
2023-07-01 12:15:59,132: MainThread: ifupdown.networkInterfaces: networkinterfaces.py:164:process_source(): debug: processing sourced line ..'source /etc/network/interfaces.d/*'
2023-07-01 12:15:59,133: MainThread: ifupdown2: main.py:85:main(): error: main exception: no ifaces found matching given allow lists
2023-07-01 12:15:59,213: MainThread: ifupdown2: log.py:373:write(): info: exit status 1

Chrischi · Jul 1, 2023

t.lamprecht said:
FYI, ifupdown2 in version 3.2.0-1+pmx3 that got the fixes for that which you sent, is already available on no-subscription, so upgrading should address this too - at least if it isn't another issue.

Unfortunately, this did not solve my problem.

I still have to boot with networking.service disabled and then start the service via crontab @boot to make my system run headless.

As you can see from the last posts in this thread, I am not alone with this problem.
@spirit ~~@davemcl~~ @athurdent
++

davemcl · Jul 1, 2023

Chrischi said:
Unfortunately, this did not solve my problem.

I still have to boot with networking.service disabled and then start the service via crontab @boot to make my system run headless.

As you can see from the last posts in this thread, I am not alone with this problem.
@spirit @davemcl ++

My issue actually got resolved with PVE 8.0.3 - the BETA didnt work for me.
Have now got 8 running on entire cluster.

athurdent · Jul 1, 2023

Chrischi said:
Unfortunately, this did not solve my problem.

I still have to boot with networking.service disabled and then start the service via crontab @boot to make my system run headless.

As you can see from the last posts in this thread, I am not alone with this problem.
@spirit ~~@davemcl~~ @athurdent
++

Try this: https://forum.proxmox.com/threads/proxmox-ve-8-0-released.129320/page-6#post-567264
Solved it for me and I obviously did also not read the release notes thoroughly. Sorry for the noise.

Chrischi · Jul 1, 2023

athurdent said:
Try this: https://forum.proxmox.com/threads/proxmox-ve-8-0-released.129320/page-6#post-567264
Solved it for me and I obviously did also not read the release notes thoroughly. Sorry for the noise.

Solved it! Thanks for the hint, and thanks to all for the support.

@t.lamprecht
Shouldn't the installation image also be patched in some way so that we can use this without a workaround?

Apparently there are (known) users who had / have the same problem.

t.lamprecht · Jul 3, 2023

Chrischi said:
@t.lamprecht
Shouldn't the installation image also be patched in some way so that we can use this without a workaround?

As mentioned in the reply to the linked post (and some follow-up post), we install chrony as default NTP daemon since years, so they are not affected, or what do you mean?

Also, the upgrade guide explicitly mentions this as known issue w.r.t. ntpsec and some installations, so anybody following it now should be notified in advance.

mavaf3f · Jul 13, 2023

spirit said:
The problem is that if you use vmbr0 + tag 202, proxmox will create a new "vmbr0v202 + ensX.202" interfaces in background, so it'll conflict with your vlan202 device (done at bridge level)

The best/easyway is to enable vlan-aware option on bridge, like this the vm tag is set on bridge port instead physical interfaces.

OK it was actually the 'bridge-vlan-aware yes' option, however as I'm running Mellanox ConnectX3 (128 vlans supported) NIC's default behavior with 'bridge-vids 2-4094' caused vmbrs using Mellanox NIC completely ignore 802.1q tags and broke networking.. I had to namely specify 802.1q tags I'd like to bridge through..

It is working but it is not very flexible in terms of adding new and new vlans to the cluster..

dar_ek · Jul 15, 2023

Chrischi said:
Unfortunately, this did not solve my problem.

I still have to boot with networking.service disabled and then start the service via crontab @boot to make my system run headless.

As you can see from the last posts in this thread, I am not alone with this problem.
@spirit ~~@davemcl~~ @athurdent
++

Try

Bash:

systemctl disable ntpsec-systemd-netif.path
systemctl disable ntpsec

Best regards

tconnors · Sep 9, 2023

It's a pity ntpsec-ntpdate is stopping boot from working. I can't test this now because I spent the day migrating all of my infrastructure to chrony (and losing the functionality I was relying on the ntp reference implementation for), but this should have a more prominent warning somewhere. I finally found the hint in https://pve.proxmox.com/wiki/Upgrade_from_7_to_8#Network_Fails_on_Boot_Due_to_NTPsec_Hook but I was following https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_12_Bookworm which does not contain the warning. In the meantime until this issue is fixed, can proxmox-ve come with a conflicts: ntpsec-ntpdate?

t.lamprecht · Sep 13, 2023

tconnors said:
and losing the functionality I was relying on the ntp reference implementation for

What specific features did you use that are missing from chrony?

tconnors said:
In the meantime until this issue is fixed, can proxmox-ve come with a conflicts: ntpsec-ntpdate?

As not all users are affected by this issue, I'd like to avoid a blanket ban for the use of ntpsec-ntpdate for all.

But I updated the article for installing Proxmox VE on top of Debian 12 to suggest installing chrony when installing proxmox-ve, which alone should cover most people, and I also added the ntpsec hint to the troubleshooting section there too – thanks for your pointer.

Search

Search

Proxmox VE 8.0 (beta) released!

ThinkYEAH

New Member

spirit

Distinguished Member

Chrischi

New Member

Attachments

patrickhult

New Member

fiona

Proxmox Staff Member

spirit

Distinguished Member

t.lamprecht

Proxmox Staff Member

davemcl

Member

athurdent

Well-Known Member

Chrischi

New Member

davemcl

Member

athurdent

Well-Known Member

Chrischi

New Member

t.lamprecht

Proxmox Staff Member

mavaf3f

New Member

dar_ek

Renowned Member

tconnors

Member

t.lamprecht

Proxmox Staff Member