proxmox v8 ifupdown2 3.2.0-1+pmx5 bridge-vids not working

[Szymons]

Hello,

I cannot add bridge-vids into vmbr

proxmox-ve: 8.0.2 (running kernel: 6.2.16-19-pve)
pve-manager: 8.0.4 (running version: 8.0.4/d258a813cfa6b390)
pve-kernel-6.2: 8.0.5
proxmox-kernel-helper: 8.0.3
pve-kernel-5.15: 7.4-4
pve-kernel-5.4: 6.4-18
proxmox-kernel-6.2.16-19-pve: 6.2.16-19
proxmox-kernel-6.2: 6.2.16-19
pve-kernel-6.2.16-5-pve: 6.2.16-6
pve-kernel-5.15.108-1-pve: 5.15.108-1
pve-kernel-5.4.189-2-pve: 5.4.189-2
pve-kernel-5.4.73-1-pve: 5.4.73-1
ceph-fuse: 16.2.11+ds-2
corosync: 3.1.7-pve3
criu: 3.17.1-2
glusterfs-client: 10.3-5
ifupdown: residual config
ifupdown2: 3.2.0-1+pmx5
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-4
libknet1: 1.28-pve1
libproxmox-acme-perl: 1.4.6
libproxmox-backup-qemu0: 1.4.0
libproxmox-rs-perl: 0.3.1
libpve-access-control: 8.0.5
libpve-apiclient-perl: 3.3.1
libpve-common-perl: 8.0.9
libpve-guest-common-perl: 5.0.5
libpve-http-server-perl: 5.0.4
libpve-network-perl: 0.8.2
libpve-rs-perl: 0.8.5
libpve-storage-perl: 8.0.2
libqb0: 1.0.5-1
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 5.0.2-4
lxcfs: 5.0.3-pve3
novnc-pve: 1.4.0-2
proxmox-backup-client: 3.0.4-1
proxmox-backup-file-restore: 3.0.4-1
proxmox-kernel-helper: 8.0.3
proxmox-mail-forward: 0.2.0
proxmox-mini-journalreader: 1.4.0
proxmox-offline-mirror-helper: 0.6.2
proxmox-widget-toolkit: 4.0.9
pve-cluster: 8.0.4
pve-container: 5.0.5
pve-docs: 8.0.5
pve-edk2-firmware: 3.20230228-4
pve-firewall: 5.0.3
pve-firmware: 3.8-3
pve-ha-manager: 4.0.2
pve-i18n: 3.0.7
pve-qemu-kvm: 8.0.2-7
pve-xtermjs: 4.16.0-3
qemu-server: 8.0.7
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.1.13-pve1

network :

auto bond0
iface bond0 inet manual
bond-mode active-backup
bond-primary eno3
bond-slaves eno3 eno4
bond-miimon 100
mtu 9000

auto vmbr11117179
iface vmbr11117179 inet manual
bridge-vlan-aware yes
bridge-ports bond0
bridge-stp off
bridge-fd 0
mtu 1500
bidge-vids 1001-2000

ip link stats :

436: vmbr11117179: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b8:ac:6f:15:23:ec brd ff:ff:ff:ff:ff:ff promiscuity 0 allmulti 0 minmtu 68 maxmtu 65535
bridge forward_delay 0 hello_time 200 max_age 2000 ageing_time 30000 stp_state 0 priority 32768 vlan_filtering 1 vlan_protocol 802.1Q bridge_id 8000.b8:ac:6f:15:23:ec designated_root 8000.b8:ac:6f:15:23:ec root_port 0 root_path_cost 0 topology_change 0 topology_change_detected 0 hello_timer 0.00 tcn_timer 0.00 topology_change_timer 0.00 gc_timer 148.78 vlan_default_pvid 1 vlan_stats_enabled 0 vlan_stats_per_port 0 group_fwd_mask 0 group_address 01:80:c2:00:00:00 mcast_snooping 1 no_linklocal_learn 0 mcast_vlan_snooping 0 mcast_router 1 mcast_query_use_ifaddr 0 mcast_querier 0 mcast_hash_elasticity 16 mcast_hash_max 512 mcast_last_member_count 2 mcast_startup_query_count 2 mcast_last_member_interval 100 mcast_membership_interval 26000 mcast_querier_interval 25500 mcast_query_interval 12500 mcast_query_response_interval 1000 mcast_startup_query_interval 3124 mcast_stats_enabled 0 mcast_igmp_version 2 mcast_mld_version 1 nf_call_iptables 0 nf_call_ip6tables 0 nf_call_arptables 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536

vlan aware is working cause I can see

vlan_filtering 1

bridge -c vlan show

vmbr11117179 1 PVID Egress Untagged

After I add vlan tag 123 into vm id 108 network 3 where is vmbr used :

tap108i3 123 PVID Egress Untagged
vmbr11117179 1 PVID Egress Untagged

 

[Moayad]

Hi,

The line in the network configuration you're provided `bidge-vids 1001-2000` should be as `bridge-vids 1001-2000` i.e., you have a typo in your network configuration.