Proxmox installation on Proliant BL460

[arielcace]

I installed Proxmox version 9 on a ProLiant BL460 Gen 10, but during installation I can't ping it and I can't access the web interface. From the IP configuration, I see that the network adapter is set to "up." What else can I check?

desde la red me aparecen los siguientes datos
ip

 

[bbgeek17]

Hi @arielcace , welcome to the forum.

What does "ip a" show?

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[Gilberto Ferreira]

I installed Proxmox version 9 on a ProLiant BL460 Gen 10, but during installation I can't ping it and I can't access the web interface. From the IP configuration, I see that the network adapter is set to "up." What else can I check?

desde la red me aparecen los siguientes datos
ip

In order to better assist, we need to know the content of the files and commands ouput

cat /etc/network/interfaces

dmesg | grep -i eth

ip a

 

[arielcace]

Hi @arielcace , welcome to the forum.

What does "ip a" show?

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[arielcace]

In order to better assist, we need to know the content of the files and commands ouput

cat /etc/network/interfaces

dmesg | grep -i eth

ip a

Attached is the result of the commands

 

[Gilberto Ferreira]

brctl show

will help too
and

ss -atpn | grep :8006
df -h
systemctl status pve-proxy
cat /etc/hosts

 

[arielcace]

Hi @arielcace , welcome to the forum.

What does "ip a" show?

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

What does "ip a" show?

 

[bbgeek17]

What is the IP of your workstation?
Can you ping the gateway?
Can you ping the PVE server?
Can you ssh into PVE server?
What is the corresponding output from your workstation? (ipconfig /all ; ip a)
What is the output of "curl -k https://127.0.0.1:8006" when run directly from PVE (over SSH or physical console?)
What is the output of "curl -k https://<CHANGE_THIS_TO_YOUR_PVE_IP>:8006" when run directly from PVE (over SSH or physical console?)

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[arielcace]

this is the result

brctl show

will help too
and

ss -atpn | grep :8006
df -h
systemctl status pve-proxy
cat /etc/hosts

this is the result

 

[arielcace]

this is the result

 

[gfngfn256]

You appear to have setup PVE with your Public IP address (90.x.x.x) - but not a local one. To which address are you pinging that device?
Your console (management?) appears to show a valid local IP 192.168.71.48. Have you misconfigured something?

 

[arielcace]

brctl show

will help too
and

ss -atpn | grep :8006
df -h
systemctl status pve-proxy
cat /etc/hosts

this is the result

 

[arielcace]

I'm using VLAN ID Tag; do I need to define this VLAN in some network configuration in Proxmox?

 

[bbgeek17]

I'm using VLAN ID Tag; do I need to define this VLAN in some network configuration in Proxmox?

That depends on how you are tagging. If its a native port VLAN - no, otherwise yes.
https://www.youtube.com/watch?v=stQzK0p59Fc
https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#sysadmin_network_vlan
https://pve.proxmox.com/pve-docs/chapter-pvesdn.html

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox