Proxmox Installation in double HD

Ubunter said:
Hi Udo,
I have 2 HD with 1.5 TB each one, and working with Raid1.
So, I said previously my ls /dev/sd? is this: /dev/sda /dev/sdb
Click to expand...
Hi,
i can only repeat - if you see two drives from the OS you don't have an hardware-raid!

You can also do a "lspci" - you will see a raidcontroller
Code: 
proxtest5:~# lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
...
07:01.0 RAID bus controller: 3ware Inc 9550SX SATA-II RAID PCI-X
...

Udo
 
Thanks Udo,
running lspci, I got this:
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Click to expand...
 
Hi,
there are no raid controller...

You can use the space of the second disk of course (like i wrote some post ago), but you don't have the benefit (performance and fault-tolerance) of an raid-controller.

Udo
 
I sow it, I request Hetzner to verify this issue.
I'll come back soon for updating.
Regards
Sam
 
Hi Again.
Thanks again Udo for your time and patient, I wanted to put you a PM, but I think it's better here...

I have the answer from Hetzner, that this device don't include the Raid1 because they don't support officially Proxmox..

So, to cut the time, I'm seeking for someone to give me a quote and do it for us, easer, better and faster... it can't be for free longer...

If anybody are interested in give me a quote to:
1. Setup the Raid software and attach the second hd in the server, fixing both with a raid.
2. Setup the IpTables in the server.
3. By the way, in the log I have this message: "rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="6473" x-info="http://www.rsyslog.com"] restart" I don't know if it's necessary to fix the rsyslog issue, if yes, we have to do it also.

The server are fully in production now, so no experimentation tolerance!

I keep waiting to hear news,

Regards,
 
You must log in or register to reply here.
Top Bottom