Proxmox 7 install fails at 3%

[hzk916]

Trying to install PVE 7 on a i7 PC NVMe 2TB, fails at 3% Create LVs tried different ISO's an different USB keys. using all default settings. PVE 6.4.4 installs fine, no trouble. Any ideas much appreciated.

 

[fabian]

start the install in debug mode, when it fails check the console and log file (/tmp/install.log) for errors.

 

[rkb405]

I had an install do this yesterday, I aborted the first run. Then ran it again and just left it alone. It hung on 3% for a while, but eventually went through. This was on a dell r240, 2 drives in raid 1 bios array. Figured that had something to do with it.

 

[hzk916]

Thanks Guys, will try leave it overnight see what happens. If it doesn't work will try Fabian's suggestion tomorrow.

 

[hzk916]

Yes that worked, took a few hours though.

 

[warloxian]

I was also hung at the 3% cell+alt+f2 shows that it is converting pve/data to thin pools also see event 4 and 5 that my mouse and keyboard are lagging behind to slow? I’ll see if the install completes