Proxmox 4.3 Problems

[pakradm]

Hello,
I have the following problems in Proxmox 4.3

1-CPU type 'host' raises error:
kvm: /home/builder/source/qemu-kvm/target-i386/kvm.c:1777: kvm_put_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
* I have installed proxmox on top of vmware player in windows 10 & my host cpu is "Core-i5 M460"

2-I have created a windows 10 guest in "pve-kernel-4.4.19-1" with virtio type disk & there isn't have any problem. but when I upgrade to "pve-kernel-4.4.21-1" the guest don't boot & it stuck at "booting from hard disk" in bios
* When I change bus to "IDE" it will boot but it's very slow!
* I have tested with both virtio driver version "0.1.118 & "0.1.126".

3-In "pve-kernel-4.4.19-1" I can mount CIFS/Samba share in /mnt/samba1 & create directory type storage in proxmox gui that point to this path & use my ISO that placed in CIFS share, but after I upgrade to "pve-kernel-4.4.21-1", the bios stuck at "Booting from DVD/CD..."

proxmox-ve: 4.3-70 (running kernel: 4.4.21-1-pve)
pve-manager: 4.3-7 (running version: 4.3-7/db02a4de)
pve-kernel-4.4.21-1-pve: 4.4.21-70
lvm2: 2.02.116-pve3
corosync-pve: 2.4.0-1
libqb0: 1.0-1
pve-cluster: 4.0-46
qemu-server: 4.0-92
pve-firmware: 1.1-10
libpve-common-perl: 4.0-76
libpve-access-control: 4.0-19
libpve-storage-perl: 4.0-67
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-docs: 4.3-12
pve-qemu-kvm: 2.7.0-4
pve-container: 1.0-78
pve-firewall: 2.0-31
pve-ha-manager: 1.0-35
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 2.0.5-1
lxcfs: 2.0.4-pve2
criu: 1.6.0-1
novnc-pve: 0.5-8
smartmontools: 6.5+svn4324-1~pve80

Regards

 

[pakradm]

Hello again!

It seems that "pve-kernel-4.4.21-1" has problem with virtio disk type. because If I change bus type of my new disk to "IDE" the problem #3 will solve.

 

[tom]

This issue is ONLY if you run Proxmox VE inside vmware. Proxmox VE is designed to run on bare-metal.

See also https://bugzilla.proxmox.com/show_bug.cgi?id=1181